Why does work done by centripetal force is zero?

Cars & Vehicles

An object moves in a circle at constant speed. The work done by the centripetal force

is zero because:

1. the displacement for each revolution is zero

2. the average force for each revolution is zero

3. there is no friction

4. the magnitude of the acceleration is zero

5. the centripetal force is perpendicular to the velocity

Previous questionWhere is the block heater located to on a 2009 lancer gts?
Next questionWhat is meant by the top speed of a car?

Related question

Work done by centripetal force?

Some work done by centrifugal force is present in our everyday lives. For instance, a clothes washer uses a rapidly spinning drum to sling and squeeze the water and soap out of clothes to wring them out. Another example is a carnival ride, such as one with hanging swings on it. As the ride spins ...

Read more

How much work is done by the centripetal force on a body along a circular path?

Zero.W = F* d cos (Theta)W = Tension * displacement * cos (90)The force is perpendicular to the objects motion (or displacement of the object)W = T * d * 0W= 0

Read more

What is centripetal force in physics?

A centripetal force (from Latin centrum, "center" and petere, "to seek") is a force that makes a body follow a curved path.Its direction is always orthogonal to the motion of the body and towards the fixed point of the instantaneous center of curvature of the path.

Read more

What is centripetal force in simple words?

Centripetal force is defined as the force acting on a body that is moving in a circular path that is directed toward the center around which the body moves.Centripetal force alters the direction of an object's motion without changing its speed.

Read more

What are 3 examples of centripetal force?

Some examples: Twirling a lasso, spinning a ball on a string(Like a Bola): Centripetal Force is provided by the force of tension on the rope pulls the object in toward the center.Turning a car: Centripetal Force is provided by the force of Friction between the wheels and the ground.

Read more

What are some examples of centripetal force?

Some examples: Twirling a lasso, spinning a ball on a string(Like a Bola): Centripetal Force is provided by the force of tension on the rope pulls the object in toward the center.Turning a car: Centripetal Force is provided by the force of Friction between the wheels and the ground.

Read more

What is the difference between centripetal and centrifugal force?

A major difference between centrifugal and centripetal force is the direction of each.Centrifugal takes place along the radius of the circle from the center out towards the object.For centripetal, it is the opposite, taking place also along the radius of the circle, but from the object in towards...

Read more

A truck pull a trailer 100 m while exerting a force of 480 newtons what is the work done by the truck?

The work done by a truck pulling a trailer for a distance of 100 M while exerting a force of 480 newtons is 48000 newtons.

Read more

When your car moves along the highway at a constant velocity the net force on it is zero WHy?

When your car moves along the highway at constant velocity, the net force on it is zero.WHy do you have to keep running your engine? You have to have on the engine to remain at constant velocity because if it's shut off there is going to be friction causing the car to slow down.

Read more

What is bad have done by scientists?

Like people there are bad and good scientists. Probably one of the worst things done by scientists is developing nerve gas. Nerve gas has no other use than to kill people and nerve gas has been developed by scientists with the aim of making them as lethal as possible. I really don't know how they...

Read more

When a soaring eagle turns during its flight What is the source of the centripetal force acting on it?

When a soaring eagle turns during its flight, what is the source of the centripetal force acting on it? LOGIN or REGISTER to be notified when your question's been answered.The motion through the air, together with the angle of the wings, produce a force of which is a component of centripetal force.

Read more

Why is your RPM at zero?

Your engine is not running or your "RPM gauge" is broken.

Read more

What is meant by frictional force?

Friction is the force resisting the relative motion of solid surfaces, fluid layers, and material elements sliding against each other.There are several types of friction: Dry friction is a force that opposes the relative lateral motion of two solid surfaces in contact.

Read more

What can be done for a speedometer that works and then does not work then works?

Change the speedo cable!

Read more

Why Tinning is done?

Tinning is a process of using a soldering iron to melt solder around a stranded electrical wire.Tinning the tips of stranded wires holds the fine wires together and makes it easy to connect them to screw terminals or other connectors.This also ensures that all of the wires are making an electrica...

Read more

What percentage of braking is done by front wheels?

Front Brake Design — Hot Stuff The front tires therefore gain more traction, and they can take more braking force to stop the car.Because the front brakes generate up to 75 percent of the vehicle's stopping force, they generate much more heat, over 500°F in heavy braking.

Read more

Does the g-force high performance chip work?

No no no no!It will shift you fuel mixture slightly at high throttle settings and provide you with slightly more power.The engine computer is programed to adjust to changes like this at lower throttle settings and will prevent any large increases in fuel economy etc.Bottom line, the change can be...

Read more

Why puc test is done?

details about PUC like whyit is /@ wt frequency/govt standards etc. diff vehicles cat.?

Read more

When a car moves along the highway at constant velocity the net force is zero why then do you continue to run your engine?

The key point is that the net force is zero. This is not the same as having zero force acting on it. The forces of drag and friction are always acting on moving objects, and the engine generates a force through the wheels that balances out this force, keeping you at a constant velocity. If the en...

Read more

What is the force that is caused by the water taken up by these vacuoles?

your mamas asscheeks spreading across the ocean

Read more

Do g force chips work?

Of course YES!!!!!!!!!!!!You must follow all instructions to the letter. there is updates you have to download from the net. there is also some components on the engine that has to be changes, such as, the thermostat, it has to be a colder thermostat, usually about 160 degrees. also put a K &...

Read more

Why does the RPM stay above zero when your vehicle is in park?

RPM tells you how many revolutions per minute your engine is running. When you're in park, the engine is still going, so RPM's will be above zero.

Read more

Why did they call Japanese planes zero?

The Allied code for Japanese aircraft was introduced in 1942, and McCoy chose "Zeke" for the "Zero".Later, two variants of the fighter received their own code names.

Read more

When your car moves along the highway at a constant velocity the net force on it is zero Why then do you continue running your engine?

there is resistance from the brake pads constantly rubbing on the rotors and the bearings still cause a little resistance and your car is going against air and any air conditioning or heating is run by the engine and the net force is not zero2nd Answer:We're still missing the point, here. Forget ...

Read more

Why is a loss draft inspection done?

Reduces Moral Hazard (Makes sure the repairs get done and the homeowner doesn't take the money to pay off their car note).

Read more

Why does your go kart have zero compression after you removed the governor?

You probably blew the motor up. They won't last long without a functioning governor.

Read more

Is Absolute Zero Possible?

Absolute zero is the lowest possible temperature where nothing could be colder and no heat energy remains in a substance.By international agreement, absolute zero is defined as precisely; 0 K on the Kelvin scale, which is a thermodynamic (absolute) temperature scale; and –273.15 degrees Celsius o...

Read more

Does constant speed mean zero acceleration?

First, constant speed does not mean zero acceleration.An object could be going on a curved path at constant speed.The object has an acceleration.Zero acceleration means constant velocity.

Read more

What is zero emission?

Zero emission usually refers to vehicles with engines that emit no pollutant gasses. Such as electric vehicles.

Read more

Why does the force of gravity do work on a car rolling down a hill but no work when it rolls along a level part of the road?

This is a basic physics situation. Gravity is a perpendicular force to the earth's surface, or a force that is directed to the earth's center. So when a car is on perfectly level ground it will not move. But when on a hill or any considerable incline it will roll (if the car is not hindered by yo...

Read more

Why would electronic door locks work by themselves?

they are electronic, and in a computer system to lock with x amount of minutes

Read more

How do you put lien on car for work done?

For this you will need an attorney or go to the city or county court and take with you the documents to prove what you've done. You may need a witness or more.

Read more

How was mechanics work done before the introduction of technology?

It was done by hand-very painful,long and expensive!

Read more

Who pays for work done due to recall?

the company that messed it up in the first place to where it had to be recalled. think about it, if you make a mistake, who gets punished?

Read more

What work has the writer Philip Stark done?

Philip Stark is most widely known for his screenplay of the film Dude, Where's My Car? as well as an interim writer for the animated show South Park and That 70's Show.

Read more

How can reduce paint consumption in automotive.Application is done by spray gun?

Likely you have to much pressure at gun use a regulator and using an HVLP gun have +- 20 psi at gun and allow around 10 psi difference when the trigger is down to have 10 psi at the air cap. Two thin one wet coat as if you layer a thin sheet at water on a surface.

Read more

How does an air conditioner work step by step?

Step 1: Heat is absorbed by the evaporator coil. The warm air inside your house is drawn in through a vent and blows over the cold evaporator coil. Step 2: Compressor raises the refrigerant temperature. Step 3: Heat is transferred outside. Step 4: Refrigerant gets cold; process repeats.

Read more

By step how does a car and an engine work?

Let me tell you this from the start, to explain how a car engine works is probely the hardest thing to do, I couldt figure it out either, it just comes to you at some point..1) A mixture of fuel an air enters the cylinder, which haves a piston inside.2) The piston is forces upwards, compressing t...

Read more

What is the practical use of centripetal motion?

Ever used a pushbike? Exactly, Legs on a push bike; reciprocating pistons in engines; heated vapor driven turbines in jet engines. Note in all the examples centripetal motion is a motion, not a force, Isac Newton's human error, he said it was a force, when in reality it is a motion, requiring a f...

Read more

Calculate the accelaration of car by its engine power in cc and force applied by it?

One cannot "Calculate the accelaration of a car by its engine power in cc" and hence derive the "force applied by it" because, depending on the configuration of the engine varying amounts of horsepower (ie engine power) can be obtained from the same size engine. One would have to have a known amo...

Read more

Why must you ensure that the meter reads zero before your vehicle is being fuelled?

Because - if it doesn't read zero, any fuel you dispense from the pump will be added toi that figure - and you will be charged for the whole amount - not just the fuel in your car !

Read more

How many times is it advised to haven maintenance work done for your vehicle?

An oil change every 3,000 miles or every three months, tire rotation about every 5,000 miles, coolant flush every 2 years unless it is the red, long life coolant.Check you owners manual for other maintenance intervals

Read more

When you're driving in a car and turn a corner centripetal force from the door of the car helps you move along the circular path of the corner?

Centripetal force acts on all masses subjected to the cornering force.The whole vehicle has centripetal force acting on the tires, via friction, allowing the vehicle to corner.If you are free to move within the vehicle, yes, the door will stop you being flung outward.

Read more

How is it possible to stop a heavy vehicle by means of a single foot force?

Hydrolics, they take the pressure and multiply it by pressing on a smaller area, most also have electric pumps as well.Think of it like a high heeled shoe, which would you rather a 17 stone rugby player trod on your foot with, flat soled shoes or very pointy high heeled boots.Hope that helps.

Read more

Explain why does addition works?

Addition works because like all mathmatics as long as you know 1/2 of the equation, answer, and type of equation (addition,subtraction,multiplication, or division) there is only 1 answer.

Read more

What have the designers of McLaren F1 done to enable it to use and overcome the forces of friction?

It is designed to have a lower drag co-efficiency rating, so that it cuts through the air more easily than say, a square box.

Read more

Why is a braking system a force multiplier?

Why is a braking system a force multiplier? The brake pedal is directly attached to a hydraulic (master) cylinder, that moves fluid to the brake calipers, where it causes the brake shoes to clamp down on the rotor, causing friction and slowing the vehical.

Read more

Why does Ac work but heat is on too?

The AC runs to remove moisture from the air inside your vehicle. Moisture causes the fog inside of your windows. The ac runs to remove the moisture and the heater runs to heat the air.

Read more

Why does overdrive only work went car is warmed up?

These days with 5 and 6 speed gearboxes being the norm, overdrive is unusual. It should work anytime, but as o'drive is usually only fitted to older cars, or as an extra on such as old Land Rovers, which use heavy gear oils, it may be that this oil has to warm up a bit before you can successfully...

Read more

At what time is the velocity equal to zero?

That is, acceleration is zero when the velocity of the object is constant.When acceleration is zero (that is, a = dv/dt = 0), rate of change of velocity is zero.That is, acceleration is zero when the velocity of the object is constant.

Read more

When filing metal it is often common practice to rub chalk into the teeth of a clean file before starting work Why is this done?

what type of metal?Heavy metalThrash metalBlack metal • death metal • doom metal • glam metal • gothic metal • groove metal • power metal • speed metal • stoner metal • thrash metal • traditional heavy metallisten to powerslave by iron maidenand some metallica (from the first 4 albums)bfmv(bullet...

Read more

Why does car heater work when car is off?

The battery runs a fan that pushes air through the residual engine heat in the heater radiator into the car.

Read more

Does force increase with height?

As the height of the object(the distance from Earth's surface) increases, the gravitational force decreases and vice versa.If an object starts free-falling from a certain height, then the gravitational force increases as it falls down reaching a maximum when it touches down.

Read more

How does force affect speed?

Well force does affect as energy (Strength) of the wind/something forcing it pushes something forward and backwards like a hurricane.

Read more

Why do we feel centrifugal force?

Centrifugal force is an inertial force so it exists to resist a force on the body through acceleration.As such it acts in the direction opposite of the acceleration.As the acceleration is inward, the inertial force is outward.The force on the end of the string is due to centrifugal force.

Read more

Why does my tail light not work?

If he or she suspects a blown fuse, they will remove the corresponding fuse for the tail lights to see if it is blown.If so, he or she will replace the bad bulb with a new one.If the bulbs and fuses appear to be working properly, the mechanic will then check the corresponding relay for the tail l...

Read more

Is cycling to work much healthier than travelling by car?

Yes it is much healthier but only if you don't get over exerted.

Read more

Why does a transmission shifter not work?

Typically the interlock with with the brake pedal has failed, also the transmission shifter linkage could be loose and jammed. You may be able to remove the shifter cover and see the interlock and manually move it aside so you can get vehicle to a shop. The interlock makes sure you do not put veh...

Read more

1976 Corvette why horn does not work?

The first thing to check when a horn stops working is the fuse. If the fuse is okay, it is possible that one of the connections has become loose or is broken. If the connections are okay, the horn itself may need to be replaced.

Read more

Why does a stoplight not work?

Probably it's time for a new bulb.

Read more

Why does ac work but not heater?

AC and heater are 2 different systems. The heater works by channeling fluid from your radiator to a heater core usually located under your dash. Heater may not work due to blockage in the line from the radiator or the heater core under your dash may be faulty.

Read more

Why does a instrument cluster not work?

quite possible a bad ground ,

Read more

Why does only one high-beam work?

A possible reason that only one high-beam will work is that the malfunctioning bulb is burnt out.

Read more

Why does light in car not work?

It could be a dead battery (if nothing else works), or if the car starts and runs OK, it's probably the fuse.

Read more

Why does a suction cup stop working?

maybe the rubber is worn out

Read more

Why does my demister not work?

Causes of demister problems: Damaged heater core – If your front demister isn't working correctly, it may be due to problems with the heater core.Bad blower motor – The blower motor forces air through your heater core, allowing it to warm up.If the blower motor fails, the demister will cease to ...

Read more

Why does the heating not working?

I assume this is the Climate control heater three things can make it not work correctly, 1) your engine coolant system's thermostat has either been removed or it is bad and stuck in the fully open position. 2) You car had a frozen radiator/coolant system. 3) Your heater coil is bad, and needs to ...

Read more

Why does your overdrive button not work?

did u try and change the fuse , or the switch

Read more

Why does the turn signal not work?

your light may be out check that first and if that is not it sorry hope that will help

Read more

Why does my starter work only sometimes?

Without knowing even the make of your vehicle, I think you should suspect the starter contacts. They can get burned and worn away and barely make contact . . . or sometimes not.

Read more

Why does my temperature gauge not work?

Of course, the most common reason for an unusual reading on your car's temperature gauge is a problem with engine temperature.However, there are other reasons, for example: A bad temperature sending unit (the second most common reason) A problem in the temperature gauge's electrical circuit.

Read more

Why does my horn only work sometimes?

But an inoperative car horn can also be caused by a bad horn switch in your steering wheel, a broken “clock spring” under the steering wheel, a bum horn relay, a broken wire or a corroded ground.Here's how to check the most likely suspects.Start with the fuse.If the horn still clicks, you'll have...

Read more

Why does my remote start not work?

Any good remote car starter should have some form of valet mode.Look on the back of your remote for the proper buttons to press to enter and exit valet mode (Usually Lock+Trunk).When you press these buttons, the parking lights should flash two times.Press the Start button, and your car should be ...

Read more

Suppose a retailer promotes its store by advertising a drawing for a free car. Is this car free because the winner pays zero for it?

The car is not "free" because it costs money, labor, and time to produce the car.

Read more

Why does a car need force from its engine when moving at a constant speed?

If there be no force ie no deceleration then no need to apply any force to compensate such a deceleration. But deceleration is there due to frictional force between the tyre and the road. Hence to compensate this we have apply acceleration. So force is neededOK Physics laws State that an object i...

Read more

Who is making air powered cars with zero emissions?

The AIRPod vehicle, developed by MDI (www.mdi.lu), is the solution to urban pollution and urban mobility.With its small size, a tiny price, zero pollution, and a fun and futuristic design, AIRPod marks a turning point in the range of urban vehicles.

Read more

How do you find acceleration when velocity is zero?

Read more

Why does a car need force when its going at a low speed?

Force is any influence that allows an object to undergo change. Force is also Mass x Acceleration, and acceleration is a change in velocity. Therefore, the more force you have, the more positive acceleration you have, and therefore the higher the speed.

Read more

Why does the 2004 trailblazer roll back down the hills forcing you to use both feet?

The Trailblazers transmission could be slipping, or the engine could be idling too low to spin the transmission fast enough to combat the gravity of the hill. Either of these could cause the roll back issue.

Read more

If parts are replaced when you have work done on your vehicle?

Request the replaced parts be returned to you when you pick up your vehicle.

Read more

How is fire breathing done?

Next, hold the torch in your dominant hand, light the wick at its base with a match or lighter, and hold the torch in front of you at arm's length.Then, inhale deeply through your nose, pour some fuel into your mouth, and spray it out of your mouth forcefully.Make sure that you don't inhale or sw...

Read more

How static balancing is done?

How is the static balancing of machines done? Static balance is achieved when the center of gravity passes through the axis of rotation.Often the axis of rotation is fixed (ie.a wheel axle cannot be moved relative to the wheel, it must pass through its center).

Read more

Why does your speedometer works sometimes and sometimes does not?

it depends on the year and make of the car, if it is old enough to have a mechanically driven speedometer (ie. a cable and a stator) you may have a rounded edge to the square end of the cable, on either end, or the stator itself may have been damaged, if the vehicle is new enough to have an elect...

Read more

You bartered your car on Craigslist for some work to be done around your house It was never done Can you repo the car?

The only way you could repossess the vehicle legally is if you maintained a lien on the title or if the title remained in your name--and in most states the title was perfected (registered with the state DMV).Any attempt to take the vehicle back otherwise could result in criminal charges.Additiona...

Read more

How a car drive by system works?

Radio signals open butterfly on throttle body vs a cable

Read more

What has to be done on 2007 Chevy hhr if power steering doesnt work?

A diagnosis has to be done to determine what the cause of the issue is, then the repair is made accordingly. Could be as simple as replacing a belt or a power steering filter, it it could go up to replacing the steering gearbox. You're asking a question to which there is more than one possible an...

Read more

Is friction a push force or a pull force?

it is both, friction is the resistance of movement on an object that is in motion creating heat. It doesnt matter if its being pulled, pushed, rolling etc

Read more

Does an inward force or an outward?

Does an inward force or an outward force act on the clothes during the spin cycles of an automatic washer? When a car makes a turn, do seat belts provide you with a centripetal force or centrifugal force? The can pushes the ladybug inward (centripetal).The ladybug pushes the can outward (centrif...

Read more

To work about 20 minutes by car.?

How long is the commute?

Read more

Initial velocity equals 0 final velocity equals 11.76 mass equals 9 kg. What is the work done?

W=m x vf2 Work equals mass times final velocity squared over 22=11.76 x 92 Square the 92= 11.76 x 81 Then multiply 11.76 by 812= 952.56 Then divide 952.56 by 22= 476.28 Use your sig figs= 4.7 x 102 J Work equals 4.7 x 102 Joules

Read more

How many championships does john force have?

15 NHRA Funny Car Championships

Read more

Can an object be accelerating when its velocity is zero?

Acceleration will be zero when there is no change in velocity of the body.Whether the object is at rest or moving at constant velocity, the acceleration at that point in time is ZERO.There is only ONE occasion when the SPEED of an object is constant yet it is accelerating, that is when the direct...

Read more

Why does the force of gravity do work on a car that rolls down a hill but no work when it rolls along a level part of the road?

on earth... as you get closer to the earths core the gravity becomes stronger.. therefore the bottom of the hill being closer to the core the gravity is stronger then the more distant top of the hill. as for the smooth road the gravity is pulling equally on all sides of the car so it cancels its ...

Read more

How charge and electric force are use by car makers to paint cars?

According to the law of electric charges,opposite charges attract and like repel. therefore, An electrical charge is placed on the part being painted, an opposite charge on the paint sprayer. Since opposite charges attract, paint droplets are drawn to the object being painted.

Read more

How much force does an airbag exert?

In fact, the maximum pressure in an airbag is less than 5 psi—even in the middle of a crash event.Advanced airbags are multistage devices capable of adjusting inflation speed and pressure according to the size of the occupant requiring protection.

Read more

How does speed affect force of impact?

The faster you drive, the greater the impact or striking power of your vehicle.The laws of physics determine that the force of impact increases with the square of the increase in speed.So, if you double the speed of a car, you increase its force of impact four times.

Read more

Where could one go to have body work done on their auto?

One can go to their local car dealership to have body work done on their auto. The dealerships usually charge more, however. Another place to look is at local small auto shops, which are usually cheaper.

Read more

Why does Steering wheel turn left by itself?

Either the road is slanted or your wheels are out of alignment

Read more

Why does your diesel engine race by its self?

usually there is a fuel leak internally however it can also be an air leak

Read more

Why does a 4 by 4 keep on acting up?

We need to know what it is doing when it acts up. Year, make and model would help also.

Read more