What is the obd2 port used for?

Every car or truck on the road manufactured after 1996 is legally mandated to have one installed.

OBD-II is an on-board computer that monitors emissions, mileage, speed, and other data about your car.

It's connected to the Check Engine light, which illuminates when the computer detects a problem.

Previous questionWhere does obd2 Scanner connect?
Next questionWhy do we use AC instead of DC?

Related question

Location of obd2 port for Mitsubishi Magna 2000?

By law in the US the OBD II DLC (Data Link Connector) has to be within 18" of the steering column.

Read more

Where is the obd2 port on 1997 laguna?

The connector should be behind the ashtray.

Read more

Where is the obd 2 port for a 2010 Honda Civic?

Left of steering wheel up under dash. Could be above gas pedal but most are more to the left by kick-panel. Federal law mandates an OBDII port to be within 3 feet of steering wheel and require no tools to access.

Read more

What is the AUX port used for in cars?

The AUX port is typically used for audio equipment that receives peripheral sound sources, such as digital music players or audio speakers.The peripheral sound device is connected to an AUX port or other medium such as a vehicle's audio jack.An auxiliary port is also known as an auxiliary jack or...

Read more

What is an OBD2 car diagnostic reader used for?

An OBD2 car diagnostic reader is used to diagnose any problems that a car might have and it saves time and money. For example, if there is an engine check light on, the OBD2 car diagnostic reader can tell what is the problem so it can be fixed as soon as possible.

Read more

Does a 2003 silverado have an obd2 port?

Yes, that model year will have OBD2. Should be under the dash on the driver side.Yes. It is located under the dash on the driver's side.

Read more

Where is the obd 2 port in a 2003 ford focus?

Ford usually place them in the passenger side footwell just in front of the door behind a plastic cover. It could be different in the Focus though as I've not worked on one.

Read more

Where is obd2 port on vw golf variant 3 19 tdi 1995?

Its located up under the dash on the Drivers side.

Read more

What is the fuel inlet port for?

Situated on top of your engine block, which contains your pistons, is your cylinder head. The reason it is called a "cylinder head" is because it is situated on top of the "cylinders" which are hollow, cylinder shaped holes in an engine block which hold the pistons. The same way your head is post...

Read more

What is the use of transfer port in engine?

Used by a technition to acess data.

Read more

What is the AUX port for in my car?

You can play music from your iPod, MP3 player, or smartphone through your car stereo by connecting it with an auxiliary cable.You'll need to make sure that your car stereo has an AUX input, connect the cable, and set the stereo to Aux mode.

Read more

What is the right test port connector for 94 jimmy?

That should be the OBD I system. OBD II started in 1996.

Read more

What is the best cheap obd2 Scanner?

Autel MaxiScan MS300 CAN Diagnostic Scan Tool for OBDII Vehicles. BAFX Products® – Bluetooth OBD2 Scan Tool – For check engine light & diagnostics – Android ONLY. ScanTool 425801 OBDLink SX USB: OBD Adapter/Diagnostic Scanner for Windows. Autel AutoLink AL319 OBD II & CAN Scan Tool.

Read more

What is the repair for an obd 2 code PO118 for a 2001 hyndai santa fe?

Trouble code P0118 means: Engine Coolant Temperature Circuit High Input Replace the coolant temp sensor

Read more

Where is the obd port for 2004 grand am?

It has to be located under the drivers side of the dash.

Read more

Can I use obd2 on obd1?

The difference between OBD1 and OBD2 Scanners OBD1 scanners only work on old cars.If a car was produced after 1996, it probably doesn't have an OBD1 port, so you can't use an OBD1 scanner with it.With a bit of work, you can configure these cars to flash out these error codes in code via the chec...

Read more

What does OBD 2 do?

OBD stands for "On Board Diagnostics". OBD-II gives the vehicle owner or repair technician access to the status of the various vehicle subsystems. The OBD-II standard provides an extensible list of Diagnostic Trouble Codes. Starting with vehicles manufactured in 1996, the OBD-II specification was...

Read more

What is the best obd2 Scanner on the market?

Top 10 OBD2 Scanners (Recommended By Experts) 3) AD510 Professional OBD2 scanner from ANCEL.4) 3150e Code Reader cum Scan Tool from Innova.5) AL519 OBD2 Scanner from Autel.6) CP9580A OBD2 Scanner from Actron.7) MaxiScan MS 300 CAN from Autel.8) Innova 3100 OBD2 Scanner.9) Launch Creader vii P...

Read more

What is the difference between obd1 and obd2 scanners?

1.OBD1 is connected to the console of a car, while OBD2 is remotely connected to the vehicle.2.OBD1 was used during the earlier years of the car manufacturing industry, while OBD2 was only introduced in car models produced in the early 1990's.

Read more

Where is the OBDII port?

Most OBDII ports can be found under the dash near the steering wheel. Some are found lower down near the kick panel. It depends on the vehicle.

Read more

What is a P500 OBD2 code?

P0500 means that the vehicles speed as read by the Vehicle Speed Sensor (VSS) is not being measured properly. Most likely either the Vehicle Speed Sensor (VSS) is not working properly or there is a malfunctioning wire leading to the Vehicle Speed Sensor (VSS). You might notice a loss of anti-lock...

Read more

What is difference between obd1 and obd2?

1.OBD1 is connected to the console of a car, while OBD2 is remotely connected to the vehicle.2.OBD1 was used during the earlier years of the car manufacturing industry, while OBD2 was only introduced in car models produced in the early 1990's.

Read more

Where is the fill port for the transmission fluid for an automatic 1993 ford explorer?

You fill a tranny through the dipstick tube. You will need to buy a small funnel.

Read more

What does OBD2 code po171 mean for sunfire?

Bank 1 system to lean. I would suspect a vacuum leak. Check under the hood for a disconnected or cracked vacuum line.

Read more

What does the obd2 connector do?

OBD stands for on board diagnostics. Its linked directly to your cars computer in order to tell you if the car is ready to pass or emissions or what's wrong with it if it isn't ready. It can also be used to trouble-shoot problems with the car. However you do need the computer necssary to plug int...

Read more

What is code p1281 off the obd2 unit?

Engine taking to long to reach operating temperatureUsually a stuck or worn out thermostat.May be a bad temp sensor

Read more

Can you use an obd2 Scanner on an obd1 car?

To Summarize OBD1 scan tools work with cars made by a specific manufacturer before 1996.OBD2 scan tools are universal and work with all cars made for the US market by ANY manufacturer as long as these cars were made in 1996 or newer.You do need to actually buy an OBD2 scan tool to access the car...

Read more

Location of the OBD port for Mitsubishi Magna 2000?

By law in the US the OBD II DLC (Data Link Connector) has to be within 18" of the steering column.

Read more

How do you find out the 97 Mazda protege is obd2 certified and is any obd2 tool will work on this car?

OBD2 diagnostics were federally mandated for all cars made/assembled/imported into the USA in 1996. A quick check of the emissions label on top of the radiator should tell you, as well as the shape of the diagnostic port. yes, any OBD2 tool will work.

Read more

Where is the low side service port?

Both ports are located on the air conditioner's metal pipes.The low-side port, like the name suggests, is lower on the pipes towards the front of the engine.While the low-side port is intended for recharging Freon, the high-side port is used for maintaining an air conditioner's internal pressure.

Read more

Does the 1991 Toyota Camry use obd 1 or obd 2?

should be obd-1 square ended connector Edited by www.TunerTools.comAny car sold in the US since 1996 will be OBD-IIIn the 94-95 model years a very, VERY small handful might have been OBD-II, but anything prior to 1996 should be assumed to be "OBD-I" which is really not a valid term as it was call...

Read more

What is EGR port in head?

Intake manifold EGR port on intake side in rear of head, the port.goes around the back where EGR valve assembly connects, the channel.than goes around on to exhaust ports down other side of head.

Read more

What is the function of a master cylinder bypass port?

The replenishing port located next to the vent port allows fluid flow to the low pressure side of the piston.As the piston travels through the bore, vacuum is created behind the piston.This flow prevents any vacuum pressure from holding back the piston as it travels forward.

Read more

What causes obd2 code p0030?

p0030 is ho2 sensor bank 1 sensor 1 heater curcuit

Read more

What years does obd2 cover?

All cars and light trucks built and sold in the United States after January 1, 1996 were required to be OBD II equipped.In general, this means all 1996 model year cars and light trucks are compliant, even if built in late 1995.

Read more

What is the difference between a port and a socket?

Socket and Port are two terms used in computer networks.The difference between socket and port is that the socket is the interface of sending and receiving data on a specific port while the port is a numerical value assigned to a specific process or an application in the device.

Read more

Where is the AC low pressure port?

To locate the vehicle's low-pressure or low-side AC port, look under the hood for the larger diameter aluminum tube that's coming from the compressor.There should be a colored, plastic cap attached and perpendicular to that aluminum tube.This is the port that you want to connect to.

Read more

Where is the obd2 socket on a 2008 merc a180?

It is under the dashboard on the drivers side. There is a little tab / door and it is under there.

Read more

Where is the OBD II port located?

The OBD-II port is usually located under the dashboard, beneath the steering wheel column (1 - 3 in the diagram below).If not located beneath the steering column, look for the port in the areas indicated by numbers 4 - 9.For additional info, check out these Hum FAQs.

Read more

Where is the fuse for the diagnostic port on a 2005 mini cooper?

The OBD2 diagnostic port doesn't have a fuse and isn't powered by its own circuit.

Read more

What is the purpose of an auto port?

The Autoport is a restaurant and bar located in State College, Pennsylvania, USA with the purpose of providing food, drinks and live entertainment both to students of Penn State University and the residents of the city.

Read more

Where is the obd2 connector location on a 2008 equinox?

It should be found under the drivers side of the dash.

Read more

Can you bypass the intake manifold and use both ports on the water pump instead?

Not sure what your trying to do but the year, make, model and engine info would help.

Read more

What causes OBD2 code 776?

This is a generic answer. I do not have the specific vehicle information. This is based on the Chevy trucks. The power train computer is detecting a "slip" in one of the clutches inside the transmission. It does not pay to go on about this with out the make model year and engine specifics. Did yo...

Read more

Where is the OBD port located?

The OBD-II port is usually located under the dashboard, beneath the steering wheel column (1 - 3 in the diagram below).If not located beneath the steering column, look for the port in the areas indicated by numbers 4 - 9.

Read more

Where is the diagnostic plug for a 1998 RVR X3 and is it obd2 or something else please?

it is OBD2 most connectors are located right under the knee bolster under the steering column it is a stand alone connector look around the Driver side under the dash

Read more

Where is the Low side service port for ac 2001 alero?

The low side service port for the AC on a 2001 Alero is located on the hose that runs from the accumulator to the compressor. It is the larger of the two hoses coming off the compressor.

Read more

What is the cheapest bidirectional obd2 scanner on the market that works well?

This is something where you get what you pay for. I have a Snap-On Modis Ultra - it certainly works well, but isn't cheap by any means. Same with the scan tools available from Matco, Cornwell, and Mac. Altel's aren't particularly cheap, either. I know that the Snap-On Verus is their top of the li...

Read more

Where is the obd2 socket on Renault grand scenic?

in my Renault scenic (2,0 16V, 2003) (not grand scenic) the obd2 socket is under the movable middle console. Move the console backwards and lift a plastic lid which appears under the console and you see the 16 hole obd2 socket.Eberhard

Read more

What is a idle port in Car?

Rephrase, Idle air control, idle circuit carburetor or

Read more

When using a Digital multimeter the black lead usually goes into which port?

Negative portOn a digital multi-meter the black lead connects to the common (COM) port in the meter.The com port or AKA the negative port.

Read more

Where is the OBD2 connector located in 2000 ford explorer?

under steering wheel column

Read more

Are all obd2 cables the same?

All OBD2 cables are not the same but all have the same type of connector on the end. This makes them universally compatible with all ODB2 vehicles.

Read more

Where is my OBD port?

The OBD-II port is usually located under the dashboard, beneath the steering wheel column (1 - 3 in the diagram below).If not located beneath the steering column, look for the port in the areas indicated by numbers 4 - 9.

Read more

Is a d16y8 obd1 or obd2?

OBD2 and OBD1 dizzy's are the same, Except the plugs, So using a OBD2 Dizzy on a OBD1 car will have no differences at all.You just need to de-pin then re-pin the wiring correctly.So if your engine is OBD2 and your using a OBD1 ECU, then its all good.

Read more

Port timing diagram for two stroke diesel engine?

PORT TIMING DIAGRAM FOR 2S ENGINEAim :To draw the port timing diagram of given two stroke cycle petrol engine .Apparatus Required :1. Two stroke petrol engine2. Measuring tape3. ChalkTheory and Description :In the case of two stroke cycle engines the inlet and exhaust valves are not present . Ins...

Read more

What does Port Engine mean?

On an aeroplane, the port engine is on the left wing - with the starboard engine being on the right wing. If I've misunderstood the question, then more information is needed.

Read more

What does obd 2 code P0335 means?

Crankshaft position sensor A circuit malfunction

Read more

What is the sport car used for?

I'll explain it like this: Having and driving or even just sitting in a hot sleek sports car ur world is in a fantasy. That loud engine that pure enjoyment. Nothing matters but u and that car. Sports cars are used for pure enjoyment and for going FAST. ANd i have to say to look good and get noticed.

Read more

What is the automobile used for?

The automobile was used to get to other place faster.

Read more

What is the cars used for?

It is used by people primarily on transportation and carrying heavy things like furnitures and stuffs related to it. Some people are using their cars just only for fun like they are customizing their car to the fullest, putting some speaker at the back portion of the car or they making use of it ...

Read more

What is the Zamboni used for?

They clean the surface of the ice rink, for safer ice skating.

Read more

What is the spark plug used for?

To ignite the compressed flamable gas in an internal combustion engine

Read more

Where is the diagnostic port location on 94 Ford Taurus?

The diagnostic port on a 94 Ford Taurus is located under the hood near the firewall usually on the driver's side. Ford started producing the Taurus in 1985.

Read more

2003 Kia Sedona LX where is the OBD port located?

left side of the dash under the steering wheel

Read more

Where is the Honda S2000 obd-ii port?

00-01 Models are on the passenger side of the console.02 and newer cars are on the driver's side of the console.If you look at the bottom cover of the steering column there are written directions where to find the OBDII ALDL/diagnostic port.

Read more

Where is the diagnostic port on a 2011 ram 2500?

Under drivers side of dash.

Read more

Where is the OBD port on a Honda Civic?

OBD connector location for Honda Civic 10 (2016 - ) The OBD II socket is located above the pedals.The OBD II port is visible on the top left of the pedals.Here is the OBD II port.

Read more

What is the wheel used for?

The first wheels were not used for transportation.Evidence indicates they were created to serve as potter's wheels around 3500 B.C.in Mesopotamia—300 years before someone figured out to use them for chariots.

Read more

What is the brand Sirocco used for?

Volkswagen are a car manufacturer and the brand the make and sell is Volkswagen. A Sirocco is a style of car that is made by Volkswagen and so is known as the Volkswagen Sirocco.

Read more

What is H parameter in two port network?

h parameter of two port network is a square matrix of order 2×2.Basically it is a way to represent a two port network.It is also known as hybrid parameter.In this form of representation, voltage of input port and current of the output port is expressed in terms of current of input port and voltag...

Read more

What kind of cars are obd2?

1996 and newer cars are required to be OBD2... It stands for On Board Diagnostics, so a mechanic can plug in a scanner to read trouble codes and other stuff

Read more

What is the DVLA database used for?

In the UK the "DVLA" means Driver and Vehicle Licensing Agency. The DVLA database is therefore a record of all the driving licence information and the vehicles registered in Britain.It can be used by the police (and to some extent insurance companies) to check that a person is allowed to drive on...

Read more

What is the brake pedal used for?

The brake pedal is used to bring a motorized moving vehicle to a safe stop. Vehicles such as cars, trucks, bicycles, and all utilize a brake petal mechanism.

Read more

What is the Cessna 406 used for?

ABOUT THIS AIRCRAFT The Cessna 406 is a twin turbo prop aircraft designed to carry small payloads such as two to three euro pallets.

Read more

Where is the diagnostic port located on a 98 Jetta?

The Data Link Connector (DLC) is located in the dash at right side of ashtray. You need to remove the ashtray and slide the access panel to the left. The connector is hidden behind it.It's kinda nifty how they hid it, but it can REALLY be a pain to find out on your own...Hope this helps!

Read more

Where is the diagnostic port located on 2005 Mitsubishi Grandis?

It will be withng easy reach of the steering wheel

Read more

Where is the OBD II port in a 2006 HHR?

By law the DLC (Data Link Connector) has to be located within 18" of the steering column.

Read more

Where is the computer port on your 1985 f150?

Maybe in the fuse area, but more likely dangling free-willy off an electrical harness under the hood, on the driver's side near the brake-booster.

Read more

Where is the OBD port on 2001 Honda CR V?

The OBD2 port is located on the passenger side of the vehicle. It is located near the center console just under the dash.http://www.obdclearinghouse.com/index.php?body=oemdb_viewvehicle&id=19764

Read more

What does a truck driver need to entry the port?

Either you need a TWIC (Transportation Worker Identification Credential) card, or you pay anywhere from $50-$100 to be escorted in the port.

Read more

Where is the refrigerant charge port on your Renault megane?

You can find the refrigerant charge port on top of the air conditioner compressor. The refrigerant charge port will be labeled as the low pressure port.

Read more

Where is the OBDII port in a 1996 Pontiac Bonneville?

Under the steering wheel, probably on the left side near the door panel.

Read more

WHERE is the diagnostic port on 2008 KIA spectra 5?

Under the dash directly above the accelerator pedal

Read more

Which line is the low pressure AC port?

The low side service port is usually located between the AC compressor and evaporator.The low side service port will have a black or blue plastic cap that needs to be removed.

Read more

How do I use a paper clip to get codes on a obd2 1997 Ford F150?

The paper clip trick was a OBD I GM thing. For your 97 Ford you need a code reader for OBD II.

Read more

How far is Amtrak from Port Canaveral?

The distance between Orlando Health/Amtrak and Port Canaveral is 48 miles.The road distance is 55.2 miles.

Read more

Where is the OBD port on a 1996 Camry?

Hidden in plain sight! It's behind the tilt out accessory drawer to the left of the steering wheel column. If you look on the bottom of the steering column there may be a poor picture of the OBD port location. Tilt the drawer out, push in the clips on both sides of the drawer, tilt the drawer fur...

Read more

Where is the diagnostic port on 1999 Nissan terrano?

The Nissan Terrano is manufactured in Spain and sold in Europe. I don't know the regulations there, but any car sold in the US on or after 01Jan1996 the OBDII port must be within 3 feet of the driver and require no tools to access. But that does not mean it's in plain sight, sometimes hidden behi...

Read more

Where is my car OBD port?

The OBD-II port is usually located under the dashboard, beneath the steering wheel column (1 - 3 in the diagram below).If not located beneath the steering column, look for the port in the areas indicated by numbers 4 - 9.For additional info, check out these Hum FAQs.

Read more

What year is a Geo Metro multi port fuel injected?

For the Geo Metro, multiport fuel injection was introduced in 1998, replacing TBI. This car was in production from 1989 to 2001.

Read more

What do I do if my charger port is broken?

You can fix the broken charger port in these steps: Power off your device and if the battery is removable, remove the battery.Get a toothpick or needle and carefully put the toothpick into the charging port.Gently level up the tab for a little. Connect your phone to a charger and see if it i...

Read more

Where is Renault clio 1999 diagnostic port?

Your obd cinch socket 16 pin is under the ashtray in centre console

Read more

Is a ported box louder than sealed?

If you like your music “boomy”, vibrating your car's body panels, you want to consider a ported (vented) enclosure.These types of enclosures, when built with the properly calculated volume and tuned to the correct frequency for the subwoofer, are generally louder than a sealed enclosure.

Read more

What is the fuel that is used for cell activity?

Water and they also use gas. They use a hydrogen cell, which explains the need for water.

Read more

What does OBD 2 code P 1200 mean?

often it is fuel pump relay

Read more

Where is diagnostic port 2004 sonata?

most OBD 2 ports a located below the glovebox or under the steering column, sometimes they have a cover over them that you just pop off. if you still cant find it just take the car to your local autoparts store and they can usually show you and sometimes they will check the code for you also.

Read more

What is cesium used for?

On clock dials to flouresce in the dark. It is also used in the atomic clock.Cesium formate is sometimes used in oil drilling.

Read more

What is dorsal used for?

situated on or toward the upper side of the body, equivalent to the back, or posterior, in humans.situated on or toward the posterior plane in humans or toward the upper plane in quadrupeds.

Read more

What is toughness used for?

Simple toughness tests use specimens of fixed size with a machines notch, and just measure energy needed to break the specimen.This cannot be applied to all materials, but is a useful way to rank toughness for materials used in products which suffer impact (particularly for metals).

Read more