What is the difference between v engine and inline engine?

Cars & Vehicles

The difference between a v engine and inline engine is that in v type engine the pistons and cylinders are aligned in in a v shape and in an inline type engine the pistons and cylinders are all vertical or inline with each other.

Previous questionWhat is proactive driving?
Next questionHow far is it to drive from San Francisco to Santa Barbara?

Related question

What is the difference between in-line and v type engines?

The cylinder arrangement of an inline engine is?ælined in a single bank while the V engine type is?æset in two banks angled to one another. Inline engine is mostly used in small cars due to its long and narrow set-up. The V line engine is cubical in shape.

Read more

What is the difference between inline and straight?

The inline-four engine is the most common four-cylinder configuration, whereas the straight-6 has largely given way to the V6 engine, which although not as naturally smooth-running is smaller in both length and height and easier to fit into the engine bay of smaller modern cars.

Read more

What is the difference between a v and an amp?

A volt is the amount of electricity available in the circuit - Picture a pail filled with water An Amp is the rate that electricity travels through the circuit - picture a hole in the pail of water - the rate that water escapes from the pail of water is amperage

Read more

What is the difference between V - Tech and Turbo?

V-tec is multiple camshaft profiles optimized for low and high RPM operations. Instead of one cam lobe actuating each valve, there are two: one optimized for low-RPM stability & fuel efficiency; the other designed to maximize high-RPM power output. Switching between the two cam lobes is contr...

Read more

What is the difference between dexron 3 and mercon v?

one is for gm and mercon is ford now days they make a dexron mercon mix acceptable to bothDexron III and Mercon V have different specs. You should not use Dexron III in place of Mercon V.

Read more

What is the difference between V and H rated tires?

H-rated tires are rated for a maximum speed of 130 mph.The V rating is the next rating faster, and V-rated tires are good to 149 mph.Both H- and V-rated tires are considered to be performance-touring tires.

Read more

Are inline engines better than V?

V engines with equal number of cylinders are usually half in size.A V engine also produces more torque at lower rpms because of the power stroke coming from two sides of the crankshaft.An inline engine is more balanced than its V counterpart because of the equal weight distribution.

Read more

What is the difference between 1978 continental town coupe and and Mark V?

There is no such model as Town Coupe. There is the Lincoln Continental Town Car which is a large 4 door sedan. The Lincoln Continental Mark V is the coupe version of that car.

Read more

What is the difference between the Honda CR V EX LX and SE?

The base CR-V LX is powered by a 2.4-liter four-cylinder engine with 184 horsepower and the CR-V EX is powered by a 1.5-liter turbocharged four-cylinder engine with 190 horsepower.Aside from the engine and fuel economy differences, the CR-V LX and CR-V EX differ when it comes to standard features...

Read more

What is difference between motor and engine?

The real difference, is the fact that "motors" run on electricity, while "engines" run on combustion.On the rare occasions we encounter one, we refer to a steam locomotive as an engine, the same word that we give to the motive power of an aircraft.But all electrical devices are driven by motors.

Read more

What is the difference between v8 and v12 engine?

The number means the number of cylinders.This has nothing to do with acceleration.If you take the displacement size of an engine, let's say 6 liters, then a V12 six liter means 500 cc per cylinder while a V8 six liter means 750 cc.But one cannot say that a V12 equipped car accelerates better than...

Read more

What is the difference between displacement and power in engines?

Displacement is a measure of volume all the cylinders in one engine combined have. Power is what the complete engine assembly can produce when running.

Read more

What is the difference between Cars motor and Cars engine?

a motor normally uses electricity and an engine usees petrol or diesel... correct if wrong please

Read more

What is the difference between a 1.4 and 1.6 engine?

1.4 or 1.6 litre simply means the volume of working fluid taken in by piston during suction period.Working fluid is air in diesel engine whereas air + petrol in petrol engines.Litre is a volume unit similiar cubic centimeter (cc) used in bikes.So 1.4 means 1400CC & 1.6 means 1600 CC.

Read more

What is the difference between external and internal combustion engines?

In an external combustion engine, the fuel isn't burned inside the engine.External engines have a working fluid that is heated by the fuel.Internal combustion engines rely on the explosive power of the fuel within the engine to produce work.

Read more

What is the difference between gearbox oil and engine oil?

Basically, engine oil and gear oil are works as an lubricant in both cases but difference between them is engine oil is a viscous liquid and gear oil is a semi soild lubricant.Engine oil and gear oil both are basically used as lubricants.Engine oil is thinner and gear oil is thicker.

Read more

What is the difference between 1.4 and 1.6 liter engines?

1.4 or 1.6 litre simply means the volume of working fluid taken in by piston during suction period.Working fluid is air in diesel engine whereas air + petrol in petrol engines.Litre is a volume unit similiar cubic centimeter (cc) used in bikes.So large displacement engines means more power but le...

Read more

What is the difference between engine and power plant?

What is the difference between an engine and a power plant? Petrol engines, diesel engines, gas turbines, rocket engines are some examples.External combustion engines - combustion takes place externally outside the engine cylinder which contains the working fluid.Steam power plant, Stirling engi...

Read more

What is the difference between a motor and an engine?

The real difference, is the fact that "motors" run on electricity, while "engines" run on combustion.On the rare occasions we encounter one, we refer to a steam locomotive as an engine, the same word that we give to the motive power of an aircraft.But all electrical devices are driven by motors.

Read more

What's the difference between service engine soon and check engine?

The "Service Engine Soon" (SES) notification signifies that scheduled maintenance is required.The SES light might also illuminate if engine oil is low.The "Check Engine Light" (CEL) on the other hand signifies an engine or EVAP system malfunction.

Read more

What is the difference between euro2 and euro3 engine?

euro1You will know when you check the pistons.One will look like Elmo the other will look like cookie monster and one will look like your mom.

Read more

What is the difference between 1.4 and 1.6 engine?

1.4 or 1.6 litre simply means the volume of working fluid taken in by piston during suction period.Working fluid is air in diesel engine whereas air + petrol in petrol engines.Litre is a volume unit similiar cubic centimeter (cc) used in bikes.So large displacement engines means more power but le...

Read more

What is the difference between generator and engine?

A generator converts mechanical energy into electrical energy, while a motor does the opposite - it converts electrical energy into mechanical energy.Both devices work because of electromagnetic induction, which is when a voltage is induced by a changing magnetic field.

Read more

What is the difference between 2 and 4 cycle engines?

The difference between a 2-cycle engine and 4-cycle engine is the 2-cycle only needs one revolution of the crankshaft to get to a power stroke, while a 4-cycle engine needs 2 revolutions.A two-cycle engine piston has only two strokes.The piston starts at top dead center (TDC) in its bore.

Read more

What is the difference between an engineer and a mechanic?

An engineer designs it, a mechanic builds it or repairs it.I agree, an engineer designs, a mechanic repairs.

Read more

What is the difference between internal and external combustion engines?

The only external combustion engine I can think of would be a steam engine. I suppose subway trains could be considered external since they receive electrical power from outside to run the electric motors.

Read more

What is the difference between 1kd & 2kd engine?

2KD-FTV: The 2KD-FTV is the 2nd generation of the KD series of engine with a smaller 2.5 L (2494 cc) displacement.Bore remains the same 92 mm but stroke is increased to 93.8 mm.It has 16 valves and is a DOHC engine with a turbocharger and intercooler.It produces 101 horsepower (75 kW) at 3400 rpm...

Read more

Difference between IC and EC engines?

1)Combustion: The main difference is where the combustion takes places. In IC engines fuel combustion takes place inside the cylinder, whereas in EC engines it takes place outside the engine cylinder.2) The temperature and pressure in an IC engines is much higher than those of EC engines.3) IC en...

Read more

What Difference between the old and the modern engines?

Depending on how old, old engines run on compressed steam, new engines run on a mixture of petroleum and air (atmospheric).

Read more

What is difference between TDI and CRDI engine?

TDI uses direct injection.It is a method wherein atomized fuel is directly sprayed into the engine's main combustion chamber through a fuel injector.“CRDI” stands for “Common Rail Direct Injection” while “TDI” stands for “Turbocharged Direct Injection.” These two are designs for your diesel engines.

Read more

What is the best inline 6 engine?

Top 10 best inline six production engines of all time BMW E46 M3 CSL S54. The ultimate naturally aspirated BMW straight six, this has to be the E46 M3's S54. Ford Falcon 'Barra' Turbo. Jaguar XK120. Hudson Hornet. Toyota 2JZ. Nissan RB-series. Holden Torana XU-1. Charger E49.

Read more

What's the difference between a rebuilt and remanufactured engine?

Remanufactured Engines vs Rebuilt Engines A remanufactured engine is remanufactured to the original blueprints and exact specifications, and is tested to original equipment standards.A rebuilt engine, the repair is done up to the level of failure.

Read more

What's the difference between 1.4 and 1.6 engine?

1.4 or 1.6 litre simply means the volume of working fluid taken in by piston during suction period.Working fluid is air in diesel engine whereas air + petrol in petrol engines.Litre is a volume unit similiar cubic centimeter (cc) used in bikes.So large displacement engines means more power but le...

Read more

What's the difference between a v4 and v6 engine?

What is the difference between a V4 engine and a V6 engine? The V4 engine contains 4 cylinders while the V6 engine contains 6 cylinders.A V4 engine is smaller and has less power compared to the bigger and more powerful V6 engine.Moreover, V6 engines also have the ability to accelerate vehicles fa...

Read more

Whats the difference between an engine and a motor?

The real difference, is the fact that "motors" run on electricity, while "engines" run on combustion.However, many people interchange the usage of these words: On the rare occasions we encounter one, we refer to a steam locomotive as an engine, the same word that we give to the motive power of an...

Read more

What is the difference between a crate engine and a block engine?

All engines have a block. But when people refer to crate they mean they bought it from somewhere already built and they are refering to the crate charge from FedEx or UPS.

Read more

What is the weight difference between a diesel engine and a gas engine?

A diesel engine is heavier than a petrol engine because some parts in a diesel engine are made from cast iron such as cylinder sleeves etc. The weight difference is usually between 10-20kgs.

Read more

What is the difference between a normal car engine and a formula 1 engine?

A Normal Car engine is built to last for years whereas the F1 car engine is built only to last 2 races. Almost all the parts of a F1 car engine are replaced at the end of the 2 races excepting the engine casing/frame whereas a normal car engine remains the same for years. A normal car engine revs...

Read more

What is the difference between unleaded gas engines and leaded gas engines?

The only way to really find a great deal on a computer is to shop around. Pick up flyers and search the web. You don't want to buy a computer and find out another store had it for less.Engines built to use leaded gas generally had higher compreesion ratios that made them more powerful. Unfortunat...

Read more

What is the difference between internal combustion engine and external combustion engine?

An internal combustion engine burns the fuel inside the engine itself, i.e. gasoline burning in the cylinders.An external combustion burns the fuel outside the engine, i.e a steam engine on a locomotive.

Read more

what is the Difference between 348 CID Chevy engine and 454 CID Chevy engine?

Many. 348 would be a small block, whereas the 454 is a big block.

Read more

What is the difference between a 3.7L engine and a 3.5L engine?

The 3.7L has more cc's and slightly bigger cylinders with piston heads than the 3.5L.

Read more

What is the difference between a Gas engine and a Gasoline engine?

Gasoline is made from petrol. Gas is made from the gas collected in the layer above the petrol. Gasoline is faster and safer. Gas is less expensive, but you can't put in a garage because it can blow or leak. Hope I'm helping you =)

Read more

What is the different between 5w20 engine oil and 5w30 engine oil?

30 is a little more viscous (thicker) at operating temperature than 20.

Read more

What is the most important difference between an internal combustion engine and an external combustion engine?

in internal combustion engine combustion happens internally in cylinder and in external combustion engine combustion happens externally in boiler

Read more

What is the Difference between internal combustion engines and diesel engines?

There is no difference. Both are internal combustion engines. I think I know what you're asking though. A gasoline engine uses spark ignition and a diesel engine uses compression ignition.The gasoline engine needs an spark or other heat source to ignite the fuel air mixture in the cylinders. The ...

Read more

What is the Difference between a 350 engine and a 454 engine?

What are the differences between a 350 and a 454 engine?

Read more

What is the difference between a race car engine and a regular car engine?

usually a race car engine has more horse power and more ft./lbs. of torque than your standard v8,v6,4cylinder car/truck engine

Read more

What difference between normal air V's nitrogen in car tires?

Nitrogen is much more stable in all temperatures and better for high speed driving.

Read more

What is the difference between preignition and detonation and how do they cause engine damage?

They are the same thing. They cause damage by applying the force of combustion to the piston before it has reached the top of its stroke, which basically pushes it "backwards"

Read more

Difference between automotive engineering and automotive designing?

Automotive engineering is how the car will perform. Automotive design is what the car will look like.

Read more

What is the difference between a class What is the difference between a class III and class IV hitch and?

class III rated for up to 5,000lbs, class IV is rated for up to 10,000lbs towing capacity

Read more

Difference between SBC and CID engines?

sbc stands for small block Chevy engine and cid stands for cubic inches of displacement

Read more

Difference between CRDi and TDCi engines?

it spilts the fuel into vapour under high constant pressurempfi stans for it ejects the fuel into each cylinder

Read more

What a different different between l-head engine and flat head engine?

The I-Head engine has the intake and exhaust valves integrated into the head assembly. A flat head engine houses no moving parts. A common example of a flat head engine is a go-cart or lawn mower engine. Hope this helps

Read more

The main difference between the internal combustion engine and the diesel engine is?

The diesel engine doesn't have any spark plugs, and uses heat generated during compression to ignite the fuel.The diesel however, is an internal combustion engine.

Read more

Difference between mpfi and carburrator engine?

MPFI stands for Multi Port Fuel Injection and uses fuel injectors. each cylinder gets its own injector which administors a measured amount of fuel to each cylinder during the intake stroke. this is a very efficent fuel delivery system.Carburrators use vaccume created by the intake to syphon gas i...

Read more

What is the difference between the Internal combustion and the External combustion engine?

In an Internal Combustion Engine, the Fuel is burnt in the cylinder or vessel eg. Diesel or Petrol engine used in Cars.Gasoline engines, Wankel engines, diesels, gas turbines are all examples of internal combustion.In an External Combustion Engine, the internal working fuel is not burnt. Here the...

Read more

Difference between internal combustion engines and external combustion engines?

In an Internal Combustion Engine, the fuel is burned in the cylinder or vessel. Eg. Diesel or Petrol engine used in Cars.

Read more

Difference between internal combustion engines and steam engines?

Internal combustion engine is where the fuel is ignited in the cylinder to make the piston move, petrol or diesel.A steam engine has an external pressure vessel to supply the steam to the cylinder to push the piston. the is no combustion in the engine as such.

Read more

What is the difference between 6v and 12v engines and why do performance engines usually require more volts?

Well first, more pistons means more exploding. That means more power is transfered to the wheels.

Read more

What is the difference between the it 490 engine and yz?

1. it490- 5 speed....yz490 4 speed. 2. yz490 has lighter, balanced crankshaft. this motor spins easier and higher, however, this is what causes the vibration as a yz/it piston is a heavy thing. 3. Same cases. 4. yz piston has slightly higher dome (more compression) 5. yz barrell has bigger exhaus...

Read more

What is the difference between a car engine and a motor?

There isn't one. Car is simply the shorter version of motor car as opposed to a railway car.The main difference is a Motor uses electrical magnetism from another source to make it run, such as a blower motor in a car. The alternator does this by being belt driven, as long as there is GASOLINE. No...

Read more

What is the difference between car engine mounting and gear mounting?

They are different mounts (different part numbers) but serve the same purpose, to hold the engine or transmission in place and absorb some of the engine vibrations.

Read more

What are the differences between a hybrid engine and a conventional automobile engine?

They are to many differences between them

Read more

Difference between a mechanical engineer and an automotive engineer?

Mechanical engineer is generalist in mechanical study and can work in most industries where to get jobs.Automotive engineer is one with start as graduate mechanical engineer with more specific topic dedicated to Automobile (example gear box).Mechanical engineer can become automotive engineer if h...

Read more

What is the difference between engine turn over vs start?

"TURNING OVER AN ENGINE" REFERS TO ROTATING THE CRANKSHAFT, USUALLY BY MEANS OF THE STARTER MOTOR AND THE RING GEAR, IF IT WAS AN OLDER ENGINE YOU COULD USE THE CRANK HANDLE THOUGH THESE WENT OUT OF FASHION DUE TO HIGHER CRANKING SPEED BEING REQUIRED TO START AN ENGINE. PUSHING THE VEHICLE (IF IT...

Read more

What is the difference in engines between a normal Dodge 2.4L engine and a flex fuel capable Dodge 2.4L engine?

The fuel system is capable of withstanding the corrosive aspects of the higher ethanol concentration and the computer is programmed with calibrations for running on E85 on the flex fuel system. The engine itself is no different.

Read more

What is the difference between a vehicle engine and a marine motors?

Boat engines are built to hold high rpms (revolutions per minute) for long periods of time. Vehicle engines are not built for high rps or most of the anyways. Vehicle engines also have more torque the marine engine.

Read more

What is the difference between wet liner and dry liner engines?

They are called wet liners as their outer surface come in direct contact with the engine coolant.i.e here the liner is the entire wall not just a sleeve.Dry liner designs use either the block's material or a separate liner inserted into the block to form the backbone of the cylinder wall.

Read more

Whats the difference between service engine soon and check engine light?

Service soon reminds that the next periodic service is coming due. The engine light indicates that the engine management system has detected a fault which effects efficiency/safety and should be investigated

Read more

What is the difference between wear and tear and damage?

Normal wear and tear is different than tenant caused damage.Normal wear and tear occurs naturally over time.Damage caused by tenants isn't a result of aging but is a result of negligence, carelessness or abuse.Normal wear and tear is required to be paid for by the landlord and tenant damage is not.

Read more

What is the difference in a car between a SOHC and a DOHC engine?

SOHC stands for Single Overhead Camshaft and DOHC is Double Overhead Camshaft looking at the top of the motor it will have the corresponding abbreviation of what type you have. The camshaft is what opens and closes the air intake and exhaust valves at the right times to coincide with the pistons ...

Read more

What is the difference between a fire truck and a fire engine?

Although most people use the terms interchangeably, a fire engine is actually different than a fire truck.A fire engine is typically the first vehicle that arrives at the scene of a large fire.Rather than carry water, fire trucks are auxiliary vehicles that carry tools such as ground and aerial l...

Read more

What is the difference between a v6 and 4 cylinder engine?

That means that more power can be generated in less time.Four-cylinder engines commonly come in "straight" or "inline" configurations while 6-cylinder engines are usually configured in the more compact "V" shape, and thus are referred to as V6 engines.

Read more

What are the differences between a car engine and a generator engine?

Technically nothing. They are both internal combustion engines. One is driving a transmission and a vehicle and the other is driving a generator.A generator is used to to produce DC current, that is driven by an electrical AC motor, Hench the term Motor-Generator applies. An engine uses it's own ...

Read more

What is the difference between Euro 3 and Euro 4 engine?

The main difference between Euro 3 and Euro 4 is that the amount of pollutants allowed has been greatly reduced utilising Electronic Fuel Injection (EFI), and that all bikes must now have Combined or Automatic braking systems (CBS/ABS).

Read more

What is the difference between a fire engine and a fire truck?

Although most people use the terms interchangeably, a fire engine is actually different than a fire truck.A fire engine is typically the first vehicle that arrives at the scene of a large fire.Rather than carry water, fire trucks are auxiliary vehicles that carry tools such as ground and aerial l...

Read more

What is the difference between a leaded and unleaded petrol engine?

a leaded engine requires you use gasoline with a lead additive which helps stop knocks and pings but is very hard on the environment, but on the plus side the leaded fuel would actually lubricate your valves and other fuel system components like the floats in the carburetter a non leaded uses fue...

Read more

What is the different between inter-cooler and after-cooler engine?

Means the same thing, just like saying blower and supercharger.

Read more

What is the difference between an engine service and a transmission service?

In engine service :The Engine and Its components are well Maintained like, Checking of Piston, piston ring, gasket, Engine oil, crank shaft, cam shaft, timing belt chain ( which Operating the valve mechanism) , Fuel injector pump ( F.I pump), Spark plug, pistonpin, Cylinder liner, etc must be che...

Read more

What is the difference between a Vortec and non Vortec engine?

Vortec heads are basically LT1 heads without the reverse coolant flow.The port design is different that the standard SBC heads, but they fit one a Gen I small block as long as there is a Vortec intake manifold (the intake ports are taller).The Vortec head is basically known for having really good...

Read more

What is the difference between a fuel injected and carbureted engine?

Carbureted vs Fuel Injected.In carbureted engines, the fuel/air mixture meets in the carburetor.In the fuel injected engine, the fuel and air do not mix until they reach the cylinder.Since fuel injection systems shoot fuel directly into the cylinders, they are easier to flood (too much fuel) when...

Read more

What is difference between licensee and licensor?

In any situation where a license is granted from one party to another, there is a licensee and a licensor.The licensee is the party that receives a license, while the licensor is the party that grants the license.

Read more

What is difference between generator & alternator?

An alternator can be called a type of generator.Both alternators and generators convert mechanical energy into electrical energy.The main difference between them is in regard to what spins and what is fixed.In an alternator, electricity is produced when a magnetic field spins inside the stator (w...

Read more

The main difference between the internal combustion engine and the diesel engine is that the diesel engine?

The main difference between diesel motors and petrol motors is in how the fuel is ignited. Gas engines use spark plugs to ignite slightly compressed fuel molecules. Diesel motors use extreme heat and compression to cause the fuel to ignite. For example a petrol engine may have an 8-1 compression ...

Read more

What is the difference between the 4B and the 6B?

2B2B or not 2B, that is the question.

Read more

What's the difference between 700r4 and 4l60e?

David compares the differences between a 4L60E and a 700R4 Transmission.A 4L60E has a case connector on the passenger side of the vehicle where the wiring harness will hookup.This connector is located next to the servo cover.As opposed to the 700R4, there is no governor cover.

Read more

What's the difference between co2 and CO?

CO - carbon monoxide and CO2 - carbon dioxide are often confused.The names sound the same, they both are colorless and odorless gases, and at high concentrations, both can be deadly.The difference is that CO2 is a common, naturally occurring gas required for all plant and animal life.CO is not co...

Read more

What's the difference between screws and bolts?

Screws are generally turned into an object, like a piece of wood, so the head needs to be bigger than the surface.The shafts of bolts are not tapered, whereas many screws are tapered.The main difference between a bolt and a screw is that a typical screw can work on its own and a bolt requires a n...

Read more

What's the difference between 4l60 and 4l60e?

4L60E vs 4L60: Biggest Differences The biggest difference between the 4L60 and 4L60E is how they are controlled.The 4L60E is controlled by a computer, while the 4L60 is controlled by a TV cable.On the other hand, a 4L60 would need a custom bracket to hook into the TV cable properly.

Read more

What's the difference between dot3 and dot4?

The basic difference between DOT3 and DOT4 is the boiling point.This is the temperature under which the fluid evaporates and also how prone to absorbing water it is.Both DOT3 and DOT4 are hygroscopic, meaning they absorb water.Due to its lower boiling point, DOT3 is more prone to water absorption.

Read more

What is the difference between the Nuvi and Street Pilot?

The nuvi series is the newer model and much slimmer than the street pilot. the street pliot is a bulkier heavier unit without all the bells and whistles of the nuvi. right now some of the earlier street pilots have been discontinued and can be baught pretty cheap but, beware because the maps will...

Read more

What is the difference between the Hummer H2 and H1?

The H1 is the original Hummer or Humvee, based on the military model. The H2 was introduced as a more consumer-friendly model, based on the Chevy Suburban body frame. It's narrower, but slightly longer and taller than the H1. They both share the distinctive Humvee grille design.

Read more

What is difference between torque and power?

Power is the rate at which work is done, that is the rate at which energy is transferred by force.The rotational force that is generated by the engine (by which the energy is trasferred) is called torque.RPM is the short for "rotation per minute".This is the speed at which the engine is rotating ...

Read more

What is difference between presales and postsales?

A pre-sale is a sale that takes place before a big sales event. A post-sale is a sale that takes place after the big sale event.

Read more

What is difference between h4 and h7?

H4 and H7 bulbs are high-intensity discharge halogen bulbs, meaning they emit extremely bright light.To increase the visibility of Headlights the Aftermarket Plug and Play type bulbs can be fitted without any change in wiring.

Read more

What is difference between obd1 and obd2?

1.OBD1 is connected to the console of a car, while OBD2 is remotely connected to the vehicle.2.OBD1 was used during the earlier years of the car manufacturing industry, while OBD2 was only introduced in car models produced in the early 1990's.

Read more

What is difference between logistics and transport?

Logistics is broader than transportation.While transportation focuses on the 'movement' of goods from one place to the other, logistics refers to the whole 'flow' management which includes not only transportation, but also storage, handling, inventory, packaging - in some sense, and many other th...

Read more

What is difference between license and permit?

What is the difference between a license and a permit? In all states, a driver's license is required to drive a vehicle on public roads.A permit, in contract to a license, also allows individuals to drive on public roads, but with a specific set of restrictions.

Read more