What does the obd2 connector do?

Cars & Vehicles

OBD stands for on board diagnostics. Its linked directly to your cars computer in order to tell you if the car is ready to pass or emissions or what's wrong with it if it isn't ready. It can also be used to trouble-shoot problems with the car. However you do need the computer necssary to plug into the OBD connector to receive information.

Previous questionHow do you get people to come to a car wash?
Next questionWhat year did they start putting computer chips in vehicles?

Related question

Where can find obd2 connector at crv2004?

All OBD2 connectors on 2004 vehicles of any make are found on the left (drivers) side under the dash panel. Most have covers to protect the prongs.

Read more

Where is the OBD2 connector located in 2000 ford explorer?

under steering wheel column

Read more

Where is the obd2 connector location on a 2008 equinox?

It should be found under the drivers side of the dash.

Read more

What does OBD 2 do?

OBD stands for "On Board Diagnostics". OBD-II gives the vehicle owner or repair technician access to the status of the various vehicle subsystems. The OBD-II standard provides an extensible list of Diagnostic Trouble Codes. Starting with vehicles manufactured in 1996, the OBD-II specification was...

Read more

Which terminals are jumpered on the OBD(6 pins) connector on a 1996 Ford Thunderbird (pre OBD2)for DTC retrieval?

The OBD-II specification was made mandatory for all cars manufactured in the United States to be sold in the United States for the model year 1996.A Ford 1995 model year would have the 6 pin EEC IV DDL connector. Jump pins marked "D" and "F" for code retrieval.

Read more

What years does obd2 cover?

All cars and light trucks built and sold in the United States after January 1, 1996 were required to be OBD II equipped.In general, this means all 1996 model year cars and light trucks are compliant, even if built in late 1995.

Read more

What does obd 2 code P0335 means?

Crankshaft position sensor A circuit malfunction

Read more

Where does obd2 Scanner connect?

1.Plug the standard OBD-II connector into the vehicle's port located under the driver's side of the dashboard.2.Turn the car's key to provide power to the scan tool or code reader.

Read more

What is a spout connector?

The Timing Spout Connector is the small plug that is removed to disable the PCM controlled timing advance so that you can correctly reset your base timing, the spout connector is then reinstalled to complete the circuit to the distributor.Genuine Ford Part.

Read more

What does OBD 2 code P 1200 mean?

often it is fuel pump relay

Read more

What is the best cheap obd2 Scanner?

Autel MaxiScan MS300 CAN Diagnostic Scan Tool for OBDII Vehicles. BAFX Products® – Bluetooth OBD2 Scan Tool – For check engine light & diagnostics – Android ONLY. ScanTool 425801 OBDLink SX USB: OBD Adapter/Diagnostic Scanner for Windows. Autel AutoLink AL319 OBD II & CAN Scan Tool.

Read more

What does OBD2 code po171 mean for sunfire?

Bank 1 system to lean. I would suspect a vacuum leak. Check under the hood for a disconnected or cracked vacuum line.

Read more

What is the obd2 port used for?

Every car or truck on the road manufactured after 1996 is legally mandated to have one installed.OBD-II is an on-board computer that monitors emissions, mileage, speed, and other data about your car.It's connected to the Check Engine light, which illuminates when the computer detects a problem.

Read more

Does my car have obd1 or obd2?

One of the main ways to know if your car is OBD1 or OBD2 is by the year that it was manufactured.Starting in 1996 OBD2 was required to be used by all manufacturers.So if your car is from before 1995 or older, it most likely has an OBD1.Whereas OBD2 scan tools can be used on any car that is OBD2.

Read more

What is the purpose of a car iPod connector?

The purpose of a car iPod connector is to have a connector in the car. A car doesn't have an electrical outlet, making this a very handy product to buy when you need one in the car.

Read more

How do you find out the 97 Mazda protege is obd2 certified and is any obd2 tool will work on this car?

OBD2 diagnostics were federally mandated for all cars made/assembled/imported into the USA in 1996. A quick check of the emissions label on top of the radiator should tell you, as well as the shape of the diagnostic port. yes, any OBD2 tool will work.

Read more

What causes obd2 code p0030?

p0030 is ho2 sensor bank 1 sensor 1 heater curcuit

Read more

What is the best obd2 Scanner on the market?

Top 10 OBD2 Scanners (Recommended By Experts) 3) AD510 Professional OBD2 scanner from ANCEL.4) 3150e Code Reader cum Scan Tool from Innova.5) AL519 OBD2 Scanner from Autel.6) CP9580A OBD2 Scanner from Actron.7) MaxiScan MS 300 CAN from Autel.8) Innova 3100 OBD2 Scanner.9) Launch Creader vii P...

Read more

How do you clear obd2 codes?

Press the ERASE button on the scanner to clear the trouble code.Doing this will turn off the check engine light.Depending on the type of scanner, the ERASE or CLEAR button will get rid of the trouble codes permanently.Turn off the ignition and unplug the scanner from the OBD2 diagnostic port.

Read more

Where is the data link connector?

OBD-II diagnostic connector The OBD-II DLC (post-1996 vehicles) is usually located under the instrument panel on the driver side, though there are several exceptions.

Read more

Where is the citreon c3 obd connector?

Most of them are located below the steering wheel at the bottom of the dash

Read more

What is a J-BUS connector?

It is a type of pass-through connector used on JVC car audio, it allows external components such as iPods and satellite receivers to be connected in series.

Read more

What causes OBD2 code 776?

This is a generic answer. I do not have the specific vehicle information. This is based on the Chevy trucks. The power train computer is detecting a "slip" in one of the clutches inside the transmission. It does not pay to go on about this with out the make model year and engine specifics. Did yo...

Read more

What is the right test port connector for 94 jimmy?

That should be the OBD I system. OBD II started in 1996.

Read more

How do you remove the wiring connector from the fuel injectors on your 2000 Cadillac Seville?

There are two locks at each connection. One lock locks the the other. So if you release and pull back the first safety lock you can then squeeze the original lock to release the connection from the injector. It's a safety thing I guess.

Read more

What is the difference between obd1 and obd2 scanners?

1.OBD1 is connected to the console of a car, while OBD2 is remotely connected to the vehicle.2.OBD1 was used during the earlier years of the car manufacturing industry, while OBD2 was only introduced in car models produced in the early 1990's.

Read more

Are all obd2 cables the same?

All OBD2 cables are not the same but all have the same type of connector on the end. This makes them universally compatible with all ODB2 vehicles.

Read more

Will the hub connector stop the bearing from working?

no the bearing will turn all the time. it is just under load when you lock your hub's

Read more

What is a P500 OBD2 code?

P0500 means that the vehicles speed as read by the Vehicle Speed Sensor (VSS) is not being measured properly. Most likely either the Vehicle Speed Sensor (VSS) is not working properly or there is a malfunctioning wire leading to the Vehicle Speed Sensor (VSS). You might notice a loss of anti-lock...

Read more

What is difference between obd1 and obd2?

1.OBD1 is connected to the console of a car, while OBD2 is remotely connected to the vehicle.2.OBD1 was used during the earlier years of the car manufacturing industry, while OBD2 was only introduced in car models produced in the early 1990's.

Read more

Where does the power drop connector plug in at 2002 gran prix?

First of all, if a major tune-up has not been done within the last 2 or 3 years, you need to do it now. Scan the computer for fault codes to locate a malfunctioning component if there is one. Check fuel pump pressure; you may have a faulty fuel pump regulator or pump and filter.

Read more

Does a 2003 silverado have an obd2 port?

Yes, that model year will have OBD2. Should be under the dash on the driver side.Yes. It is located under the dash on the driver's side.

Read more

Where is the OBDII connector on a 2007 Honda Accord?

It is located under the dash panel (which has to be removed) to the left of the steering column.

Read more

Where is the obd connector on a 2004ford escape?

The 2004 Ford Escape OBD 2 port is on lower edge of dash, right of hood release

Read more

What is code p1281 off the obd2 unit?

Engine taking to long to reach operating temperatureUsually a stuck or worn out thermostat.May be a bad temp sensor

Read more

Does the 1991 Toyota Camry use obd 1 or obd 2?

should be obd-1 square ended connector Edited by www.TunerTools.comAny car sold in the US since 1996 will be OBD-IIIn the 94-95 model years a very, VERY small handful might have been OBD-II, but anything prior to 1996 should be assumed to be "OBD-I" which is really not a valid term as it was call...

Read more

What kind of cars are obd2?

1996 and newer cars are required to be OBD2... It stands for On Board Diagnostics, so a mechanic can plug in a scanner to read trouble codes and other stuff

Read more

OBD2 CODE P0320?

Ignition/Distributor Engine Speed Input Circuit Malfunction

Read more

Where is the location diagnosis connector for citroen c5?

Inside the glove box on the left hand side behind a small removable panel. Certain fuses are mounted here as well.

Read more

Where is the data link connector on a 2005 SRX?

Since I'm not in front of the OBD machine and don't have my manual here at the house and so have no reference to find the actual location, I'm just going to tell you the places these connectors are usually found:*Under the dashboard, could be anywhere in the driver's side area.*In the console are...

Read more

Where is the diagnostic connector on Ford van?

Need to know what year, it makes a difference.OBD II DLC is under the drivers side dash area.Before OBD it was located under the hood, drivers side I believe. It may be tucked inside a protector to keep it clean. It is also in two pieces.

Read more

CAN OBD 2 codes?

Most Common OBD-II Codes P0128. Coolant Thermostat (Coolant Temperature Below Thermostat. P0171. System Too Lean. P0174. P0300. Random/Multiple Cylinder Misfire Detected. P0401. Exhaust Gas Recirculation "A" Flow Insufficient Detected. P0440. Evaporative Emission System. P0442. Evaporative ...

Read more

What is a data link connectors purpose on a vehicle?

It's a place to hook up a diagnostic scanner when you need to find out why a car is giving you a "check engine" light. They're usually found underneath the steering wheel in newer cars or in the engine bay on some older cars.

Read more

What is the best way to clean the connectors of an automotive battery?

Rusted connectors on a vehicle's battery could be the cause of a car that won't start. The process for cleaning these connectors can be detailed in full on wikiHow.

Read more

What is the connector under the rear wiper and hatch release for on a 1995 Tahoe?

It's possible that it has something to do with the rear windshield wiper fluid dispenser. You don't describe it very well but that may be it.

Read more

What is the color code of an harness connector of airbag in chevy uplander?

All connectors relating to airbags will be yellow. Be advised airbags are dangerous, if you intend on disconnecting anything airbag related be sure to disconnect the battery to avoid any injury.

Read more

Where is the obd2 socket on a 2008 merc a180?

It is under the dashboard on the drivers side. There is a little tab / door and it is under there.

Read more

What is the cheapest bidirectional obd2 scanner on the market that works well?

This is something where you get what you pay for. I have a Snap-On Modis Ultra - it certainly works well, but isn't cheap by any means. Same with the scan tools available from Matco, Cornwell, and Mac. Altel's aren't particularly cheap, either. I know that the Snap-On Verus is their top of the li...

Read more

What would you expect to the DLC connector when faults with audio system?

I would expect if it is a domestic vehicle it would show either a A0331 or A0341 code, and if it is a imported vehicle it would show code A1679 and either code A0519 or A0520. Any of these codes will help you track down if it is the stereo itself or if it is the wiring. If none of these codes are...

Read more

What is an OBD2 car diagnostic reader used for?

An OBD2 car diagnostic reader is used to diagnose any problems that a car might have and it saves time and money. For example, if there is an engine check light on, the OBD2 car diagnostic reader can tell what is the problem so it can be fixed as soon as possible.

Read more

Where is the obd2 socket on Renault grand scenic?

in my Renault scenic (2,0 16V, 2003) (not grand scenic) the obd2 socket is under the movable middle console. Move the console backwards and lift a plastic lid which appears under the console and you see the 16 hole obd2 socket.Eberhard

Read more

Where is the obd2 port on 1997 laguna?

The connector should be behind the ashtray.

Read more

Can I rent an obd2 Scanner?

The best place to rent or borrow an on-board diagnosics (OBD or OBD II) scanner is often at a mechanic's office or garage.Scanning may or may not be a free service that they will offer.Oftentimes, a mechanic will scan your vehicle for free if you will be buying repair services from his shop.

Read more

How do I identify where a yellow female connector connects on 03 Dodge Durango?

You need a shop manual that has wiring diagrams. Bright Yellow connections usually are associated with the air bag system so be careful.

Read more

Geely gk 1.5 OBD connector location IN car?

In: http://wiki.answers.com/Q/FAQ/4423 [Edit categories]

Read more

1996 Maxima gxe obd1 or obd2?

All cars and light trucks built and sold in the United States after January 1, 1996 were required to be OBD II equipped. In general, this means all 1996 model year cars and light trucks are compliant, even if built in late 1995. However there is no guarentee your 1996 is OBD2. Some early 1996 Nis...

Read more

Is a d16y8 obd1 or obd2?

OBD2 and OBD1 dizzy's are the same, Except the plugs, So using a OBD2 Dizzy on a OBD1 car will have no differences at all.You just need to de-pin then re-pin the wiring correctly.So if your engine is OBD2 and your using a OBD1 ECU, then its all good.

Read more

Who has an obd2 engine scanner?

Buy them at obd2cart auto or have auto value scan it for free for you. but you

Read more

Can I use obd2 on obd1?

The difference between OBD1 and OBD2 Scanners OBD1 scanners only work on old cars.If a car was produced after 1996, it probably doesn't have an OBD1 port, so you can't use an OBD1 scanner with it.With a bit of work, you can configure these cars to flash out these error codes in code via the chec...

Read more

What is the repair for an obd 2 code PO118 for a 2001 hyndai santa fe?

Trouble code P0118 means: Engine Coolant Temperature Circuit High Input Replace the coolant temp sensor

Read more

How do you reset my OBD2 computer on my Sunfire 2003 automobile?

If you want to reset the "check engine" light you should first determine and correct the reason why the light came on in the first place. Most full service auto parts stores can help you with that at no cost.

Read more

Where is t-connector trailer wiring on legacy wagon?

What year legacy? If it's in '95-2000 year range, it's likely in the left rear access panel....for sure on Outbacks as I installed on my '97. Rumor is the newer ones are same. Good luck.

Read more

Where inside the car of a 2002 Maxima is the OB2 connector located?

THE CONNECTOR IS LOCATED BELOW THE DASH BOARD AT THE BASE OF THE STEERING COLUMN

Read more

How do you convert an obd2 ecu from auto to manual?

With some ECU's, you can take them to a company that does automotive computer work, and have it re-programmed with the necessary information to function with the new transmission. If the ECU cannot be reprogrammed, then it might need to be replaced with one that has the parameters needed to opera...

Read more

How do I know if my car is obd1 or obd2?

One of the main ways to know if your car is OBD1 or OBD2 is by the year that it was manufactured.Starting in 1996 OBD2 was required to be used by all manufacturers.So if your car is from before 1995 or older, it most likely has an OBD1.

Read more

How do I use a paper clip to get codes on a obd2 1997 Ford F150?

The paper clip trick was a OBD I GM thing. For your 97 Ford you need a code reader for OBD II.

Read more

Excessive current flowing in a circuit can be to corrision on the connectors?

Yes. Overflowing raise temperature of connectors, and corrosion is heat-sensitive process.

Read more

Location of obd2 port for Mitsubishi Magna 2000?

By law in the US the OBD II DLC (Data Link Connector) has to be within 18" of the steering column.

Read more

Where is the Data link connector on a 2002 Honda accord?

Under the glovebox, in the passenger kickwell.

Read more

Where is the datalink connector on a ford 1999 Ford F-150?

Under left side (driver's side) of the dash.

Read more

Which terminals are jumpered on the OBD connector on a 1996 Ford Thunderbird for DTC retrieval?

That would be a OBD II system. You need a code scanner to read the codes.

Read more

Where is the obd 2 port in a 2003 ford focus?

Ford usually place them in the passenger side footwell just in front of the door behind a plastic cover. It could be different in the Focus though as I've not worked on one.

Read more

Can you use an obd2 Scanner on an obd1 car?

To Summarize OBD1 scan tools work with cars made by a specific manufacturer before 1996.OBD2 scan tools are universal and work with all cars made for the US market by ANY manufacturer as long as these cars were made in 1996 or newer.You do need to actually buy an OBD2 scan tool to access the car...

Read more

What is a data link connector on a 2001 ford windstar?

The Data Link connector usually refers to the connector the hand held OBDll scanner tool hooks up to to scan for any bad codes in your on board computer.The DLC (Diagnostic Link Connector) is the multi-pin diagnostic connection port for automobiles and trucks used to interface a scan tool with t...

Read more

Is a mk1 2000 EU ford focus OBD2 compatible?

I know that the 2001 model is OBD2 Compatible.Check out this site: www.carplugs.com/obd2ford.html

Read more

Where to hook up obd2 scanner on 2010 tundra?

should be a connection under the dash on the drivers side

Read more

Will an obd2 Scanner work on a obd1?

One scanner won't work on two different brands even if they have the same issues.For example, An OBD1 scanner for Toyota won't work for Ford.OBD1 scanners offer basic functionalities.They can check the emission system, read and monitor engine performance, and produce warning messages.

Read more

Where is obd2 port on vw golf variant 3 19 tdi 1995?

Its located up under the dash on the Drivers side.

Read more

Has any body had an obd 2 trouble code1351 and fixed the problem?

That code is vehicle specific. A Chevrolet and a Ford could both have that same code and have them mean completely different things. So without knowing the exact year, make, or model of vehicle I cannot tell you the exact problem.For a Ford vehicle code P1351 is; Ignition Diagnostic Monitor circu...

Read more

Where is the obd 2 port for a 2010 Honda Civic?

Left of steering wheel up under dash. Could be above gas pedal but most are more to the left by kick-panel. Federal law mandates an OBDII port to be within 3 feet of steering wheel and require no tools to access.

Read more

What is the part name for the connector that connects all the drivers door wiring to the car in a Civic LX?

Hello, I'm pretty sure that what you are talking about is the driver's door harness,(the fat hose looking thing that goes from the actual car to the driver's door). I replaced this part not so long ago since my power windows were not working and I had to kinda press on that thing for them to work...

Read more

Where is the diagnostic plug for a 1998 RVR X3 and is it obd2 or something else please?

it is OBD2 most connectors are located right under the knee bolster under the steering column it is a stand alone connector look around the Driver side under the dash

Read more

Can't find scan tool connector on 85 Lebaron 2.6 ltr eng.?

There isn't one. OBD-I didn't come about until 1991. The previous system was ALDL, which doesn't use a diagnostic connector - the check engine light is blinked in various patterns to report fault codes, and those blink patterns have to be deciphered.It is located under the hood. If your scan tool...

Read more

What does the sylanoid do?

A solenoid transfers electical energy and activates some other device.Solenoid, means a coil of wire. It is generally arranged as an electromagnet, which can pull on a lever and operate a heavy switch.A solenoid used in cars, is a heavy duty relay. A small current from the starter/ignition switch...

Read more

What does the crankshaft do?

A crankshaft converts the linear motion of the piston(s) into the rotational motion of the engine's output shaft.It also generally provides drive to the camshaft(s) and oil pump, as well as other devices.

Read more

What does the CDI do?

In a CDI system, a charging circuit charges a high voltage capacitor, and at the instant of ignition the system stops charging the capacitor, allowing the capacitor to discharge its output to the ignition coil before reaching the spark plug.

Read more

What does the differential do?

The automotive differential is designed to drive a pair of wheels while allowing them to rotate at different speeds.In vehicles without a differential, such as karts, both driving wheels are forced to rotate at the same speed, usually on a common axle driven by a simple chain-drive mechanism.

Read more

What does the car do?

The car enables us to get from point "A" to point "B" and hopefully back again.WRONG!a car gets you to your destination and carries passengers

Read more

What does the automobile do?

it makes the way traveling faster and easier

Read more

What does the winglet do?

It changes the flow of air over the ends of the wings making the plane more fuel efficient.

Read more

What does the DME do?

Distance Measuring Equipment (DME) is a system that is used in aviation for navigation purposes.The DME system consists of an interrogator on board an aircraft and a DME station on the ground.The interrogator in the aircraft transmits interrogating pulses to the DME station on the ground.

Read more

How can you get my new obd2 scan tool to work on foreign vehicle?

Your new scan tool may not have come with the software to read foreign cars. Check with the manufacter to see what came with the scan tool & if they have a separte program for foreign cars.

Read more

Where can I find obd 2 connection on 2012 Chrysler 300?

Should be at the bottom corner near where the footwell and dash intersect on the driver's side.

Read more

What does the automobile car do?

it ... wait for it ... DRIVES

Read more

What does the intake valve do?

Intake valve allows the atomized fuel mixture to enter the combustion chamber to be ignited by spark plug creating detonation

Read more

What does the brake hold button do?

When activated Honda Brake Hold automatically holds the brakes for the driver once a complete stop is made.The driver is able to remove his or her foot from the brake pedal once stopped with out the car rolling forward or backwards.

Read more

What does the air temperature sensor do?

The Intake Air Temperature sensor (IAT) monitors the temperature of the air entering the engine.The engine computer (PCM) needs this information to estimate air density so it can balance air air/fuel mixture.Colder air is more dense than hot air, so cold air requires more fuel to maintain the sam...

Read more

What does the MSD 6al do?

MSD stands for Multiple Spark Discharge, and that's just what it does.It gives you better spark.At low RPMs, it provides 4 sparks at a time, instead of just one like the stocker.Plus, its a hotter spark.

Read more

What does the wiper control module do?

The windshield wiper module, or governor, controls the wiper motor operation.It is responsible for determining wiper speed and parking.A faulty windshield wiper module can result in erratic wiper operation or wipers that don't work at all.

Read more

What does the powertrain control module do?

The TCU or Transmission control module takes inputs from the engine sensors or TCU to change the gears for the optimum engine performance and fuel efficiency of your cars.The PCM gets inputs from the sensors which are spread around the car and which gives information related to Engine management ...

Read more