How much horsepower does a Yamaha Raptor 700 have?
The Raptor 700R is Yamaha's second generation of the Raptor (first gen being the Raptor 660) and is powered by a 686cc single cylinder four-valve electronically fuel injected engine (approximately 47 hp), with electric start and a five-speed manual transmission with a single-speed reverse.
Factory rating is 37 at the rear wheels, with factory tires.
Its been all over the net on what they have or said to have or what have you, still debated on some threads Ive seen lol. Confirmed:Yamaha rates the 700 Raptor engine as 46.9hp @ the crank.Ive dynoed a near stock 700 (baffle pulled and lid off) that went 45rwhp on slicks.Many other dynos across t...
An 80cc Yamaha raptor typically has 3.5 horsepower
normally they are not measured in horsepower but i believe it is around 30 hp
Race-bred five-speed transmission with reverse, along with Raptor 700R SE's monstrous powerband, means there's a choice of gears in just about all situations.YZ-spec ratchet shifter ensures smooth, resistance-free shifting under power.Heavy-duty clutch features sturdy basket and plates designed t...
I have a 1996 Banshee that I recently started dropping a little money into. Really just to make it more competitive with the new famed 4 strokes, mostly 450R's and Suzuki Quadracer 450S. Everything else I pretty much beat, except Outlaws... When I got the Banshee it was completely stock as far as...
Okay, on a pavement or hard-packed dirt "drag race" (in a straight line) with both ATVS stock without any motification and both riders are about the same skill level, The 450 WILL beat the 700 in a shorter race, but if this is a longer drag race (nearly a km or a mile) The 700 should pull ahead, ...
It depends on which 327 you are asking aobut. Horsepower ranged from 225 to 375. Besides the carbureted versions, a fuel-injected 327 with 360 hp was optional in the '62 Corvette. The cylinder heads used on this engine (and some others of the era) were the 3782461X head with 1.94/1.50-inch valves...
The 601 is a car from Trabant, with front wheel drive, a front located engine and a saloon (sedan) body style.Its engine is a naturally aspirated petrol, 0.6 litre, two stroke 2 cylinder.In this application it has an output of 30 bhp (30.4 PS/22.4 kW) of power at 4200 rpm at 3000 rpm.
Earlier this year, Alpha Transport took delivery of its initial five Kenworth T680s.Its three T680 day cab fuel haulers are specified with the PACCAR MX-13 engine rated at 500 hp and 1,850 lb-ft of torque, while the two T680 76-inch sleepers use the same engine with 455 hp and 1,650 lb-ft of torque.
Engines, Ride, and Handling An 8.0-liter 16-cylinder engine uses four turbochargers to make 1500 horsepower and 1180 lb-ft of torque, but calling its acceleration "heroic" would be an understatement—Bugatti claims a zero-to-60-mph time of just 2.3 seconds and a top speed of 261 mph.
7.While it is not a motorcycle for horsepower-devouring hillclimbs, the CRF250F will make its way up a technical black-diamond hill with much less effort than you would expect.The soft suspension means great traction, and the sweet motor makes the most of it.
Locomotives come in a wide range of horsepower ratings. Mostly based on what its application was to do. A modern day diesal locomotive that you see that pull those long trains will mostly have 4300hp to 4400hp. Those horsepower ratings are the industry standard in North America. But there were mo...
The LS6 engine was rated at 450 horsepower, though empirical tests and popular opinions range from 350 to over 500 horsepower.The LS7 454 was initially rated at 465 horsepower, but it was advertised at 500 horsepower by the time it went on sale as a crate engine from General Motors.
first, loosen the 4 screws at the bottom by the chain second, take a screw driver, or a thin rod, and insert it into 1 of the two holes on the left side of the sprocket in the rear barron third, push forward to loosen the chain and pull forward to tighten it. Lastly, tighten back the four screws....
Porsche 911 GT2 RS - 700 Horsepower The transmission is a seven-speed PDK dual-clutch.It can go from naught to 100 km/h / 62 mph in under 3 seconds; top speed is 340 km/h / 211 mph), but what it really likes most is to go around corners, usually with its tail either slightly out or really pushin...
If, in fact, we're talking about a 5.7 (350 cu. inch) optioned Iroc for 1989, [confirm with VIN number (if 8th digit from left to right is the number "8", then it's equipped with the 5.7L motor)] then it will depend upon whether or not it came equipped with the RPO "G92". Find your RPO codes stic...
should be a 5.3L engine in a Z71, which was right around 260HP in 02
the 307 only had 140hp, only the 442 with the "9" code 307 had 180.
Depends on which series. The older M998 series used a 6.2 litre Detroit Diesel V8, which produced 165 horsepower at 3600 RPM. The newer A2 series, based on the M1113 chassis, uses a 6.5 litre Detroit Diesel V8 turbo diesel rated at 215 horsepower at 3200 RPMs.
Obviously, this is different with every truck, as there are many different sizes and makers of the engines that are used in semi trucks.The lower end of the scale, used in small or older semi trucks and straight trucks, would be around 275-300 horsepower. The upper end of the scale, as in large n...
Specifications Base Engine Size:5.9 LBase Engine Type:GasCylinders:V8Horsepower:235 hp @ 4000 rpmTorque:330 ft-lbs. @ 3000 rpm1 more row
Initially rated at 295 horsepower, the Northstar V8 has been ranked as one of the "10 Best Engines in North America" by Ward's Auto World.It also beat out both Mercedes-Benz and BMW in horsepower per liter of displacement, fuel economy and required maintenance.
AMC/Jeep 4.0 Six Cylinder Engine Specifications HorsepowerTorque1988177 @ 4,500224 @ 2,5001992190 @ 4,750225 @ 4,000*2003190235* 190 / 220 on Wrangler1 more row
For a decade, F1 cars had run with 3.0-litre naturally aspirated engines with all teams settling on a V10 layout by the end of the period; however, development had led to these engines producing between 980 and 1,000 hp (730 and 750 kW), and the cars reaching top speeds of 375 km/h (233 mph) (Jac...
1967 Chevrolet Impala brief technical data What body style?2 door fixed-head coupé with 4/5 seatsWhat size engine?6.5 litre, 6490 cm3How many cylinders?8, VHow much power?330 PS / 325 bhp / 242 kW @ 4800 rpmHow much torque?556 Nm / 410 ft.lb / 56.7 kgm @ 3200 rpm3 more rows • Apr 25, 2004
SLT 4x2 Quad Cab 160.5 in. WB 2002 Dodge Ram 1500 Specs PerformanceBase engine size4.7 litersBase engine typeV-8Horsepower240 hpHorsepower rpm4,8006 more rows
The 5.3-liter is pushing 270 horsepower at 5000 rpm and 315 lb.-ft.of torque at 4000 rpm.The horsepower is up and the peak torque down from your 1998 5.7-liter, but Chevy claims the broader torque range designed into the new small blocks make up the difference in overall performance.
With its ability to produce over 700 horsepower, and unleash a roar that literally makes the earth quake, this purpose-built race car really gets our minds racing.
The base Grand National hit 245 horsepower and 355 pound-feet of torque, and the GNX pumped out a mighty 276 horsepower and 360 pound-feet of torque.This netted the GNX a 0-to-60 time of 4.7 seconds and a 1/4-mile time of 13.5 seconds.The Base grand Natty cleared the quarter in 14.23 seconds.
A Detroit Diesel DD15 14.8-liter inline six-cylinder engine weighs 2,880 pounds, or 345 pounds more than a Mini Cooper.This colossal power plant makes up to 560 hp and 1,850 lb-ft of torque, and at just 1,200 rpm the engine produces more than 1,500 lb-ft of torque.
Horsepower & Torque A 5.0L Ti-VCT V8 engine is under the hood of the Mustang GT and GT Premium trims and it delivers 460 horsepower and 420 lb-ft of torque.Cranking out 526 horsepower and 429 lb-ft of torque is the 5.2 Flat Plane Crank V8 engine of the Shelby GT350® and GT350R®.
A 160 horsepower, 4.3-liter V6 engine came standard with the 1995 K1500.Available were several other engines, including a 175-horsepower, 5.0-liter V8, a 200-horsepower, 5.7-liter V8, a 155-horsepower, 6.5-liter diesel V8 and a 180-horsepower, 6.5-liter turbocharged diesel V8.
Specifications Base Engine Size:4.6 LCylinders:V8Horsepower:224 hp @ 4750 rpmTorque:265 ft-lbs. @ 4000 rpmTurning Circle:40.3 ft.3 more rows
Key changes for American and European 1970 Volkswagen Beetle models included an engine increased to 1600 cc (as on Type 3), and horsepower increased to 57.
Specifications Base Engine Size:3.0 LBase Engine Type:GasCylinders:V6Horsepower:222 hp @ 6400 rpmTorque:198 ft-lbs. @ 4800 rpm1 more row
Clearly.It should at least match the Z4 M40i's 382 hp and 369 lb-ft of torque.When it goes on sale in the U.S., the launch model will feature an electronic differential and an active suspension.There's no four-wheel steering or all-wheel drive offered.
It didn't.In fact, the two engines traced the exact same horsepower and torque curves, with the old engine making a little more power from 5000 rpm to 8000 rpm and the 2018 having the advantage from 8000 rpm to 11,000 rpm.Peak power for 2018 was 57.55 horsepower, at 9700 rpm, compared to the prev...
For 1955, Ford increased the displacement and made engines at both 272 and 292 cubic inches.The 272 made 162 horsepower and 258 pound-feet of torque.All basic Ford products received this engine.The 292 engine gave Thunderbird and Mercury drivers 193 horsepower and 280 pound-feet.
The Grand Prix GTP fits the OHV 3.8-liter engine with an Eaton supercharger for 260 horsepower and 280 lb-ft of torque, besting even the quick 240-hp Honda Accord and Nissan Altima.
Ford 300 cid (4.9L) Straight 6 Specs Engine:Ford 300 inline 6, later 4.9L I-6Fuel System:Varies w/ model yearEngine Oil Capacity:5 qts w/ filterPeak Horsepower:101 - 150 hp (see table below)Peak Torque:223 - 283 lb-ft (see table below)12 more rows
View the Massey Ferguson 50 specs below.The Massey Ferguson 50 Tractor has a three point hitch with a claimed pto 38 hp.
24v Cummins Horsepower & Torque by Model Year Model YearHorsepowerTorque2004• 235 hp @ 2,700 RPM (CA) • 305 hp @ 2,900 RPM (std) • 325 hp @ 2,900 RPM (H.O.)• 460 lb-ft @ 1,400 RPM (CA) • 555 lb-ft @ 1,400 RPM (std) • 600 lb-ft @ 1,600 RPM (H.O.)2005 - 2007325 hp @ 2,900 RPM610 lb-ft @ 1,6...
read Dodge Charger Daytona Standard engine for 1969 was a 230-horsepower 318 cubic-inch V-8.For the first time in a Charger, a six-cylinder motor was available, but less than 500 were so equipped.The 383 V-8 was offered in both two or four-barrel versions, producing 290 and 330 horsepower, respe...
7.3L Power Stroke Specs Engine:7.3L Power Stroke diesel V-8Peak Horsepower:• 210 hp @ 3,000 rpm (intro horsepower rating, 1994 MY) • 275 hp @ 2,800 rpm (peak horsepower rating, 2003 MY)Peak Torque:• 425 lb-ft @ 2,000 rpm (intro torque rating, 1994 MY) • 525 lb-ft @ 1,600 rpm (peak torque rati...
The 200 cubic inch six cylinder was standard equipment, and produced 120 horsepower.The 289 cubic inch V-8 engine was available with either 200 horsepower, called the "Challenger," 225 horsepower, called the "Challenger Special," or with 271 horsepower, called the "Challenger High Performance."
The 258 used between '80 and '81 was putting out 110 HP @ 3500 and 195 ft/lbs @ 2000. The 304 used from '80-'81 in CJs, J-series pickups, and Wagoneers suffers in performance. Upgrades. Factory Options. General. AMC 304 V8Bore x Stroke3.75" x 3.44"Displacement304(4.98L)Compression Ratio8.4:1...
For the "true" 1965-model-year Mustangs, the 170 six was replaced by an improved 200-cubic inch unit with 120 horsepower, the 260 V-8 gave way to a two-barrel 200-horsepower 289, and the four-barrel 289 was tuned up to 225 horsepower.
I cannot find that model on Kohler's web site. http://www.kohlerengines.com/home.htm
The 5.7-liter, V-8 engine powering the 2016 Toyota Tundra makes 381 horsepower at 5,600 rpm and 401 foot-pounds of torque at 3,600 rpm.
The 5.0-liter engine saw many alterations in performance during the Mustang GT models from 1982 to 1993.In 1982, the engine produced a relatively low 157 horsepower at 4,200 rpm.Models produced in 1983 and 1984 increased to 175 hp at 4,200 rpm.