How do you route smaller serpentine belt on98 zx2 to bypass ac compressor?

Cars & Vehicles
Ford F-150
Serpentine Belts
Ford Escort ZX2

The belt that I used my my 1999 ford escort ZX2 is a 6K730 to bypass the A/C. when routing the difference is the belt will come from the power steering to the tension pulley to the crank then water pump and the rest is normal. I hope this helps

Previous questionHow soon can you wax your car after it has been painted?
Next questionDiagram of a transmission 1996 Geo Metro?

Related question

How do you reroute serpentine belt to bypass ac compressor on 1995 town car?

If that model was available without a/c, you will need to purchase the belt for a 95 town car w/out ac, and follow the appropriate belt routing diagram for that model.

Read more

How can you bypass a serpentine belt on a 2002 converible sebring from the ac compressor?

You realy can't. If your intention is not to power the A/C unplug the wire that connects to the electric clutch. It should be right behind the pully.

Read more

Can you Bypass compressor 97 caravan with smaller belt?

yes you can bypass ac with either a ac bypass pulley made by dorman or get a longer belt

Read more

Is there anyway to bypass the AC Compressor with a serpentine Belt without using a Pulley bolted to the engine?

if you can reroute the belt to bypass the ac compressor all you need to work out is how much shorter the belt is that you would require

Read more

Can buy a serpentine belt for 1996 3.1 liter V.s Pontiac grand that bypasses the AC compressor?

Go to any auto parts store and see if Pontiac sold a 1963 Model with the 3.1 V6 without an air conditioner. If not a belt from any GM model equipped without A/C and the 3.1 V6 should work.

Read more

What size belt is needed to bypass the ac compressor on 1993 Lexus ls400?

it would be a 5 by 6 belt for a magnum for a Lexus you would need a 3 by 7

Read more

How do you repair ac compressor belt 1993 j 30?

if your talking about the serpentine, you buy a new one

Read more

What is the accessory belt routing for 98 Ford ZX2?

'round the big wheels with grooves... also everyone should have a manual for their vehicle, and the local library should have a SHOP manual available in the reference section--make copies of the right info and read up..you'll be a pro in no time ...good luck:)

Read more

Routing new serpentine belt on 94 Plymouth Voyager?

When routing a new serpentine belt, make note of how the old belt was routed. Take a picture of the belt routing if possible. Also most cars have a sticker under the hood with the routing on it.

Read more

1999 mercury grand marquis 4.6 serpentine belt routing?

The 1999 Mercury Grand Marquis has (2) TWO engine styles, both different. The style for Vin numbers with a "W" engine, and the Vin numbers with an "X".The "W" series has the A/C Compressor to the RIGHT of the engine when viewed from the front.The belt circles all components from the outside but t...

Read more

How can I bypass the AC compressor module to run the AC on a 1997 Lincoln town car?

Dude, it took me literally 5 minutes to get it out, and 15 minutes to find a new one at a junkyard! Your dash has plastic fake wood in the center. Passenger side, gently pry outward from the top corner of the fake wood piece and continue to the steering wheel. Not difficult and the piece is meant...

Read more

Can you bypass the ac compressor belt on a 2003 f 250 6.0 and if so what is the belt length?

You are chasing a dream. No you cannot as they did not make one without a/c. Trust me, you will spend a lot of time and money trying belts and it will not work.There is a company that makes what they call an a/c bypass pulley that mounts to the engine that replaces the entire compressor. Unfortun...

Read more

Can you get a diagram of a serpentine belt for a 2000 Ford Escort ZX2 please?

lift the hood. usually there.

Read more

How do you change a serpentine belt?

How to Replace a Serpentine Belt Take a good look at both your repair manual and your belt routing diagram under the hood before beginning. Look at the way the old belt wraps around the pulleys. Locate the self-adjusting tensioner and know that you need to be careful when releasing tension ...

Read more

How do you reset ac to get compressor going again?

Could use a little more info but in most cases the system has lost freon which means you have a leak. There is no reset. System needs to be tested, repaired and recharged.

Read more

How do you remove serpintene belt on 98 Ford truck?

The tensioner has an arm with a roller at the bottom. Find the size of the socket required to get around the nut at the center of the roller (I believe the last Ford I did this on required a 16mm socket). Turn the ratchet/breaker bar (attached to the socket) counterclockwise. The arm should turn ...

Read more

How do you remove serpentine belt on 2005 Chevy Cobalt?

You have to release the stress in the tensioners to remove the serpentine belt. When you put it back on there is a diagram under the hood of the car that takes you step by step.

Read more

What is the correct routing for a serpentine belt on a 1999 BMW 740 il car?

It is important to have the belts of a car put in the right direction. This serpentine belt goes around the AC compressor, above the AC tensioner,under the crank pulley, around the power steering, over the alternator pulley, under the idle pulley, around the w/p,and behind the tensioner.ÊÊ

Read more

How do you set serpentine belt tension on a Chrysler?

The tension on a serpentine belt is automatically set by the Idler Tension Pulley. If you find it is not correctly setting the tension, the the spring may be broken.

Read more

How do you stop serpentine belt from squeeking?

Replace belt and check all pulleys for wear or rough spot

Read more

How do you find the ac compressor for Lincoln ls?

the compressor is located in the lower front drivers side wheelwell. This is also where you recharge your A/C.

Read more

How do you replace serpentine belt on a fx 35?

1. Remove front engine undercover.2. Loosen idler pulley (alternator and power steering oil pump belt) lock nut and adjust tension by turning bolt.3. Same is done for the other idlery pulley (A/C compressor belt).

Read more

How do you replace serpentine belt on 2005 Equinox?

Begin by loosening the tensioner pulley on your 2005 Chevrolet Equinox. The serpentine belt will become loose and can be removed. Reverse the process to install your new serpentine belt.

Read more

How do you align a serpentine belt pulley?

Read more

How long do BMW serpentine belts last?

With that being said most serpentine/drive belts can last for a very long time before they need to be replaced.The lifespan of the belt will depend mostly on the type of material it's made of.Older style belts generally last about 50,000 miles, while those made from EPDM can last up to 100,000 mi...

Read more

How do you get ac belt off?

there has to be a way to loosen the belt. either the compressor has to move or there is an idler pulley which moves. some of the pulleys are spring loaded, some have elonged holes for movement and some are on threaded rods. all depends on the make and model and motor of the car. need to be more s...

Read more

How do you change ac belt?

From under the front vehicle on jackstands.....The bottom wheel of the u belt combo connecting the motor to the ac compressor, is "the" ac compressor that well has a bolt in the center of it. You must first remove the front skid plate (if equipped) from underneath the radiator and front of engine...

Read more

How do you replace ac compressor 1999 aurora?

Identify and remove freon. Remove the failed compressor and transfer the brackets, sensors, manifolds and switches to the replacement unit. Clean components that are not being replaced. Replace the dryer or accumulator. Install the new compressor.

Read more

How do you remove an ac compressor from an automobile?

It is illegal to release refrigerant into the atmosphere. I suggest you take this to a professional who has the proper equipment to do this legally and correctly. Recharging the system also requires specialized tools and knowledge.

Read more

How long do car AC compressors last?

Usually, though, you can expect that you will get 8-10 years of use from your AC compressor, and for many drivers, that essentially means the life of the car.

Read more

Do you need to flush car ac system before installing ac compressor?

If there is metal chips and trash from the old compressor in the system, yes you need to flush the system. Any trash left in the system will shorten the life of the new pump.

Read more

Do you have a diagram of how to put the serpentine belt on the pulley?

You may get an answer if you list the vehicle & engine you are talking about. You are not going to get an answer to this question as is.

Read more

How do you get the accessory drive belt or serpentine belt off of a 1989 sunbird?

To remove the accessory drive belt or the serpentine belt from the motor on a 1989 Sunbird, it is necessary to loosen the belt tensioner. Look for a pulley that has a bolt in a slot. Loosen the bolt and move the tensioner so there is a gap in the belt. Then remove the belt from each pulley.

Read more

You install a ac compressor and not take any tension and now the belt want fix?

Is the belt routed correctly? your local auto parts store could help with routing diagrams.

Read more

Need to find out how to replace serpentine belt?

Just pry the belt tensioner back and remove the old belt, and install a new one.

Read more

Do I need to replace my serpentine belt?

Most serpentine belts generally last between 50,000 and 100,000 miles.Eventually, your car's serpentine belt will wear down from continuous exposure to heat and friction and will need to be replaced.

Read more

How do you remove the AC clutch pully from a 97 laSabra AC compressor?

It takes a special puller. Your local auto parts store should have one available.

Read more

How much does it cost to replace a serpentine belt?

Typical costs: Hiring a mechanic to replace a serpentine belt typically costs about $60-$200 or more.This includes $25-$75 for the belt plus half an hour to an hour of labor, at $75-$120 per hour.The job could even take longer on some vehicles, if the belt is difficult to access or install quickly.

Read more

How do you do you find the serpentine belt diagram for a Toyota RAV4 2001?

There should be a diagram under the hood somewhere. Normally on the fan shroud. Click the link for a diagram. If you do not see one search with the term "2001 Toyota Rav 4 belt diagram" and you will find a diagram.

Read more

How long does it take to replace serpentine belt?

How Long Does It take To Replace A Serpentine Belt? For professional automotive technicians with the right tools and training the replacement of a serpentine belt usually takes about 30 min to an hour.This time varies by the make, model, and year of vehicle that you're driving as some take longer...

Read more

Do you have a diagram of the serpentine route for a 1995 olds royale?

The 1995 Oldsmobile serpentine belt routing diagram can be obtained from most General Motors dealerships. The diagram can be found at most auto-parts stores.

Read more

How often does a serpentine belt need to be replaced?

How often does a serpentine belt need to be replaced? Serpentine belts are built to last—much longer than before because of advancements in rubber technology.Under ideal conditions, a belt should stick with you for an average of 60,000 to 100,000 miles.

Read more

What does an AC bypass pulley do?

An AC bypass pulley is a free spinning pulley used to replace the AC compressor on an automotive engine.When the AC compressor goes bad in a vehicle, a consumer often will choose to install an AC bypass pulley.However, once installed the vehicle will no longer have air conditioning.

Read more

How much does it cost to replace the serpentine belt?

Typical costs: Hiring a mechanic to replace a serpentine belt typically costs about $60-$200 or more.This includes $25-$75 for the belt plus half an hour to an hour of labor, at $75-$120 per hour.The job could even take longer on some vehicles, if the belt is difficult to access or install quickly.

Read more

Can your AC not working have anything to do with the mechanic just replacing the drive belt tensioner and serpentine belt?

Check to make sure the belt is routed around the compressor pulley. Also check the wiring connector at the compressor in case it was dislodged.

Read more

What causes the serpentine belt to break?

Serpentine belt problems usually result from one of three causes: a defective belt tensioner; misalignment of a pulley; or, defective bearings in the tensioner, idler, or one of accessories driven by the belt (including the water pump).Squealing sound: Belt slipping.

Read more

How expensive is it to replace a serpentine belt?

Typical costs: Hiring a mechanic to replace a serpentine belt typically costs about $60-$200 or more.This includes $25-$75 for the belt plus half an hour to an hour of labor, at $75-$120 per hour.The job could even take longer on some vehicles, if the belt is difficult to access or install quickly.

Read more

Can you add too much oil to AC compressor?

While installing a new compressor or any other parts in your AC system, it is imperative that you add the correct amount of oil.If you add too much oil to the system, it may pool in various places of the system and can coat the inner walls of the evaporator and condenser coils.

Read more

Can you replace a serpentine belt yourself?

Serpentine belt replacement is easy because today's automatic drive belt tensioners eliminate the need to loosen bolts or pry components into position for retensioning.Just rotate the tensioner, remove the old belt and install a new one.

Read more

What does a serpentine belt do?

A serpentine belt is a single, continuous belt used to drive multiple peripheral devices in an automotive engine, such as an alternator, power steering pump, water pump, air conditioning compressor, air pump, etc.

Read more

When should you replace your timing belt on 98 pathfinder?

hyow much play on the belt do you have. and also if there is any cracking of the belt replace now.

Read more

How much does it cost to replace an AC compressor?

The cost of an AC compressor unit can range from $195 to $736 for the part itself, while the cost for parts and labor can be between $376 to $986.This will depend on the model of car and how much work is involved in the repair, with some units being substantially more difficult to replace than ot...

Read more

Can you drive without serpentine belt?

Since the serpentine belt is generally the only accessory drive belt on vehicles these days, this is what you'll lose: Engine cooling* - The serpentine belt drives the water pump.Without the water pump, there will be insufficient coolant flow to maintain engine temperature, and you will overheat ...

Read more

Do you losen the altinator to change serpentine belt on a 94 Jimmy?

You'll have to loosen the alternator to get the belt off, unless you have a tensioner pulley in the sequence of the serpentine. yes it removes the tension to make it easier just did it last weekend.

Read more

How much oil do I put in my AC compressor?

For a new compressor, look up the specifications of your AC system.An average car might use a bit of oil (4 oz.) and two cans of refrigerant R-134a (12 oz.)

Read more

Where do you put the oil in an AC compressor?

The compressors today do not have sumps so the oil circulates throughout the system.the two lines that bolt to the compressor is where the oil goes. hope your system is empty. if not then use a tool (got mine from bg products) that will allow u to add w/ freon in it

Read more

What causes ac compressor to not disengage?

pressure switch located on the accumulator

Read more

What causes AC compressor to seize?

Wiring.An auto AC compressor receives electrical power via a wire that connects it to the electric clutch.A loose connection or short in the wire can cause the compressor to lose power and seize.Tightening the connection or replacing the faulty wire should correct the compressor seize.

Read more

How do you get the tensioner to move on 1988 caravan to replace serpentine belt having a diffucut time trying to get belt on?

You don't mention which engine but on my 90 3.3 I put a wrench on it and just move it. It's kinda hard.

Read more

How often should serpentine belt be changed?

How often does a serpentine belt need to be replaced? Serpentine belts are built to last—much longer than before because of advancements in rubber technology.Under ideal conditions, a belt should stick with you for an average of 60,000 to 100,000 miles.

Read more

How do I test my car AC compressor?

Read more

Can do it yourself ac recharging ruin the ac compressor?

Directly, probably not. Indirectly, yes. Too much refrigerant, and you get too much system pressure, a low superheat, and it can impede the flow of PAG oil through the system. More the same with too little refrigerant. If you're having to recharge your system, it means you have a leak somewhere, ...

Read more

Can you drive without AC compressor?

if the clutch and/or pulley on your compressor are okay, yes, you can continue to operate your vehicle without any issueswithout a compressor you will need a bypass pulley and special length of belt.think it's a serpentine belt.

Read more

How often do car AC compressors go bad?

Usually, though, you can expect that you will get 8-10 years of use from your AC compressor, and for many drivers, that essentially means the life of the car.

Read more

How do I know if my AC compressor is working?

Read more

How do I check my car AC compressor?

Read more

How do I know if my AC compressor needs oil?

Read more

How important is a serpentine belt?

Well, it won't keep your pants up, but it does transport power to your vital automotive components.The serpentine belt is one long, snaking, winding belt that keeps your alternator, power steering pump, air conditioning and — in some cases — your water pump running smoothly and effectively.

Read more

Can you by pass the security system in 99 ford escort zx2?

i don't know never tried. Are you going to try? what are you some kind of freak?

Read more

Why do car AC compressors go bad?

The causes of compressor failure due to system contamination can include such elements as air, moisture, dirt, and acids which can form with the addition of heat and pressure.The main causes of electrical failure include imbalances in the voltage or current, resulting in overheating and failure.

Read more

How do figure out when to change the serpentine belt in 2001 Toyota corolla car?

Look at the belt. If it's shows signs of being frayed on the edges, or if it looks dry and cracked by the inner ribs, or if you hear a squeeling sound when you accelerate, or if you have more than a 1/4 inch play (push your finger on the belt), it's time to change your belt.

Read more

How do you change the serpentine belt on a 1994 mercury cougar xr7?

with a 1/2" rachet or breaker bar placed in the square whole on the tensioner pully, you push (from passenger side to drivers) which will release the presure on the belt. Might want to draw a "map" of how the belt goes cause it ain't obvious when its off the car.

Read more

How do you change a serpentine belt on a Chevy Silverado?

Shop Products Familiarize yourself with the belt routing diagram.Insert a 3/8 inch drive ratchet into the belt tensioner.Pull the tensioner counterclockwise to loosen the belt.Pull the belt off the idler pulley.Release the tensioner.Pull the belt off and out.

Read more

How do you know if your serpentine belt is going bad?

Symptoms of a Bad or Failing Serpentine/Drive Belt Squealing noise from the front of the vehicle. If you notice a squealing noise coming from the front of your vehicle, it could be from the serpentine belt. Power steering and AC not working. If the serpentine belt completely fails and breaks...

Read more

How do you replace a serpentine belt on a 1995 Chevrolet Camero?

Replacing the serpentine belt on both V6 & V8 rear drive engine are fairly easy than front wheel drive. The belt is located just between the front of the engine and the radiator. You have plenty of clearance to work. Just need to losen the tension and the belt should come out. Putting the new...

Read more

How do you repair the serpentine belt on a 1998 Mitsubishi Galant?

You don't repair a serpentine belt. You replace the worn or broken belt with a new one.

Read more

How do you install serpentine belt on 88 Chevy silverado 4x4 350 auto?

Loosen tensioner and follow label (under hood) for routing

Read more

How do you change a serpentine belt on a 2001 Chevy Suburban?

Read more

How long should an AC compressor last?

Usually, though, you can expect that you will get 8-10 years of use from your AC compressor, and for many drivers, that essentially means the life of the car.

Read more

How does an AC compressor clutch work?

When the driver requests AC, the system provides power to the clutch coil, thereby generating a magnetic field.When the clutch coil receives power and generates a magnetic field, it pulls a portion of the clutch plate against the clutch body/pulley, causing it to rotate the compressor shaft.

Read more

How do you release serpentine belt on a 89 Mercury Cougar?

You have to release your tensioners in order to release your serpentine belt. When you put the belt back on you have to follow the diagram on the hood of your car.

Read more

How do you change a serpentine belt on a 2001 Chrysler Town and Country?

How to Replace the Serpentine Belt in a Chrysler Town & Country Open the hood and find the belt tensioner pulley. Look at how the belt is routed around various pulleys. Use a wrench to rotate the belt tensioner pulley bolt and slide the old belt off of the tensioner pulley. Make sure y...

Read more

How do you replace the serpentine belt on a 1993 Mercury Cougar?

To remove the serpenteen belt on this vehicle, you must first locate the spring loaded tensioner. You will need a 1/2" breaker bar or a socket to recoil the spring load. doing this will release the tension on the belt. You can then remove the belt.NOTE: If you are just changing the belt with a ne...

Read more

How do you change a serpentine belt on a 2008 Toyota Corolla?

Read more

How do you adjust serpentine belt on a 1999 Holden jackaroo?

On all U.S. vehicles that use A single serpentene the belt has an automatic tensioner. I suspect that your can does too. It could be stuck.

Read more

How do you install a serpentine belt on a 99 Isuzu Rodeo?

There is a belt tensioner (spring loaded pulley that automatically keeps the belt tight) that needs to be temporarily slackened while the now loose belt is slipped off one of the accessories. Sorry, but I can't remember what tool is needed to loosen the belt tensioner. Just opening the hood and o...

Read more

How do you tighten the serpentine belt on a 1997 Saturn?

You don't. The belt tension is automatically adjusted via a spring loaded tensioner. If the serpentine belt is noisy or worn out prematurely. replace the tensioner. The belt should be inspected for cracks and other signs of wear. Replace worn out belt(s) before they break leaving you stranded.

Read more

How do you restart a 2000 alero that broke the serpentine belt?

Serpentine belts don't just break. There is probably an accessory that is locked up such as the alternator or a idler pulley. Check each pulley that the belts contacts and make necessary repairs before installing a new belt. Once you have done that just start the engine back up as you normally wo...

Read more

How do you change a serpentine belt on a Mazda 3?

How to Replace a Mazda 3 Serpentine Belt Open the Mazda 3's hood and support it with the prop rod. Connect the belt-tensioner tool into serpentine belt tensioner and move the tensioner pulley away from the belt with the tool. Pull the belt off the engine accessory pulleys by hand. Stretch ...

Read more

How do you bypass e brake on kenwood KVT-512?

Ground the green wire on the harness.

Read more

How do you change the ac compressor in a 2000 Chevy silverado?

^^^^^^^^this is not the best answer that someone gaveits not that complicated takes basic skillsemail me and i will give you step by step instruction

Read more

How do you loosen the AC compressor on the roof of your motor home?

loosen retaining bolts

Read more

How do you know if your ac compressor is bad on a 1995 Chevy camaro?

It can get noisy and leak oil. You can verify it by hooking up a set of A/C gauges, the high pressure side will see very low pressure.

Read more

Can you bypass the ac on 95 bronco?

well, you 'bypass' it by turning it off? The compressor freewheels when the HVAC is off, so you might further explain bypass.

Read more

What would cause a serpentine belt to squeal?

Serpentine belt problems usually result from one of three causes: a defective belt tensioner; misalignment of a pulley; or, defective bearings in the tensioner, idler, or one of accessories driven by the belt (including the water pump).Squealing sound: Belt slipping.

Read more

What causes a serpentine belt to slip off?

Slipping can be the result of a loss of belt tension (or a weak automatic tensioner) or pulley misalignment.When the belt slips off the track, the friction between the belt and accessory drive pulleys causes the belt to overheat.If you hear a high pitched squealing noise, it's probably time for a...

Read more

What causes a serpentine belt to come off?

Serpentine belt problems usually result from one of three causes: a defective belt tensioner; misalignment of a pulley; or, defective bearings in the tensioner, idler, or one of accessories driven by the belt (including the water pump).

Read more

Is it OK to drive with a bad serpentine belt?

If the serpentine belt completely fails and breaks, then your car will break down.If the power steering fails when the vehicle is moving it could cause serious safety issues.Preventative maintenance is one way to make sure your belt does not break while you are driving.

Read more

Is it easy to change a serpentine belt?

And to make matters worse, there were often two or three belts to change.Serpentine belt replacement is easy because today's automatic drive belt tensioners eliminate the need to loosen bolts or pry components into position for retensioning.Just rotate the tensioner, remove the old belt and insta...

Read more

Can you drive with a bad serpentine belt?

This is all because many cars have one serpentine belt that drives the water pump, the power steering pump, the alternator and the air conditioning compressor, and the fan.Some cars have an electric fan.It is best to not drive a car with a broken belt, even for a short distance.

Read more