How do you replace a serpentine belt on a 1995 Chevrolet Camero?

Cars & Vehicles
Ford F-150
Serpentine Belts
Chevy Avalanche

Replacing the serpentine belt on both V6 & V8 rear drive engine are fairly easy than front wheel drive. The belt is located just between the front of the engine and the radiator. You have plenty of clearance to work. Just need to losen the tension and the belt should come out. Putting the new one is the reverse process.

Previous questionWhy did Your car stereo and CD player suddenly lose all power and never came back on?
Next questionWhere to advertise car for sale need best results?

Related question

How do you replace serpentine belt on a fx 35?

1. Remove front engine undercover.2. Loosen idler pulley (alternator and power steering oil pump belt) lock nut and adjust tension by turning bolt.3. Same is done for the other idlery pulley (A/C compressor belt).

Read more

How do you replace serpentine belt on 2005 Equinox?

Begin by loosening the tensioner pulley on your 2005 Chevrolet Equinox. The serpentine belt will become loose and can be removed. Reverse the process to install your new serpentine belt.

Read more

How do you reroute serpentine belt to bypass ac compressor on 1995 town car?

If that model was available without a/c, you will need to purchase the belt for a 95 town car w/out ac, and follow the appropriate belt routing diagram for that model.

Read more

Can you replace a serpentine belt yourself?

Serpentine belt replacement is easy because today's automatic drive belt tensioners eliminate the need to loosen bolts or pry components into position for retensioning.Just rotate the tensioner, remove the old belt and install a new one.

Read more

How do you replace the serpentine belt on a 1993 Mercury Cougar?

To remove the serpenteen belt on this vehicle, you must first locate the spring loaded tensioner. You will need a 1/2" breaker bar or a socket to recoil the spring load. doing this will release the tension on the belt. You can then remove the belt.NOTE: If you are just changing the belt with a ne...

Read more

How do you set serpentine belt tension on a Chrysler?

The tension on a serpentine belt is automatically set by the Idler Tension Pulley. If you find it is not correctly setting the tension, the the spring may be broken.

Read more

How do you change a serpentine belt?

How to Replace a Serpentine Belt Take a good look at both your repair manual and your belt routing diagram under the hood before beginning. Look at the way the old belt wraps around the pulleys. Locate the self-adjusting tensioner and know that you need to be careful when releasing tension ...

Read more

How do you remove serpentine belt on 2005 Chevy Cobalt?

You have to release the stress in the tensioners to remove the serpentine belt. When you put it back on there is a diagram under the hood of the car that takes you step by step.

Read more

How much does it cost to replace a serpentine belt?

Typical costs: Hiring a mechanic to replace a serpentine belt typically costs about $60-$200 or more.This includes $25-$75 for the belt plus half an hour to an hour of labor, at $75-$120 per hour.The job could even take longer on some vehicles, if the belt is difficult to access or install quickly.

Read more

How often does a serpentine belt need to be replaced?

How often does a serpentine belt need to be replaced? Serpentine belts are built to last—much longer than before because of advancements in rubber technology.Under ideal conditions, a belt should stick with you for an average of 60,000 to 100,000 miles.

Read more

How expensive is it to replace a serpentine belt?

Typical costs: Hiring a mechanic to replace a serpentine belt typically costs about $60-$200 or more.This includes $25-$75 for the belt plus half an hour to an hour of labor, at $75-$120 per hour.The job could even take longer on some vehicles, if the belt is difficult to access or install quickly.

Read more

How do you get the tensioner to move on 1988 caravan to replace serpentine belt having a diffucut time trying to get belt on?

You don't mention which engine but on my 90 3.3 I put a wrench on it and just move it. It's kinda hard.

Read more

Do I need to replace my serpentine belt?

Most serpentine belts generally last between 50,000 and 100,000 miles.Eventually, your car's serpentine belt will wear down from continuous exposure to heat and friction and will need to be replaced.

Read more

Can I replace serpentine belt myself?

Serpentine belt replacement is easy because today's automatic drive belt tensioners eliminate the need to loosen bolts or pry components into position for retensioning.Just rotate the tensioner, remove the old belt and install a new one.

Read more

Does Jiffy Lube replace serpentine belts?

The serpentine belt! For this key component, rely on the Jiffy Lube® serpentine belt replacement to help keep your vehicle on the road.

Read more

Where could you find an illustration on replacing serpentine belt on '97 Buick Park Avenue?

There should be an illustration in your ownners manual.Just had mine done.. mechanic had to remove psgr side motor mount to release belt. Not a fun job.trust me this ne job you want to pay someone to do, you need to lower the engine cradle to remover the PS motor mount,you could also visithttp://...

Read more

How long does it take to replace serpentine belt?

How Long Does It take To Replace A Serpentine Belt? For professional automotive technicians with the right tools and training the replacement of a serpentine belt usually takes about 30 min to an hour.This time varies by the make, model, and year of vehicle that you're driving as some take longer...

Read more

How much does it cost to replace the serpentine belt?

Typical costs: Hiring a mechanic to replace a serpentine belt typically costs about $60-$200 or more.This includes $25-$75 for the belt plus half an hour to an hour of labor, at $75-$120 per hour.The job could even take longer on some vehicles, if the belt is difficult to access or install quickly.

Read more

When should I replace my serpentine belt?

Under normal conditions, the belt needs to be replaced every 4 to 6 years.However, those living in areas where the temperature and humidity can vary greatly throughout the year may need to change it more frequently.

Read more

How do you align a serpentine belt pulley?

Read more

How do you replace belt on ls1?

Pardon me but what is an Is1?

Read more

Need to find out how to replace serpentine belt?

Just pry the belt tensioner back and remove the old belt, and install a new one.

Read more

How do you change a serpentine belt on a Chevy Silverado?

Shop Products Familiarize yourself with the belt routing diagram.Insert a 3/8 inch drive ratchet into the belt tensioner.Pull the tensioner counterclockwise to loosen the belt.Pull the belt off the idler pulley.Release the tensioner.Pull the belt off and out.

Read more

How do you change a serpentine belt on a 2001 Chevy Suburban?

Read more

How do you change a serpentine belt on a 2001 Chrysler Town and Country?

How to Replace the Serpentine Belt in a Chrysler Town & Country Open the hood and find the belt tensioner pulley. Look at how the belt is routed around various pulleys. Use a wrench to rotate the belt tensioner pulley bolt and slide the old belt off of the tensioner pulley. Make sure y...

Read more

How do you change a serpentine belt on a 2008 Toyota Corolla?

Read more

How do you install a serpentine belt on a 99 Isuzu Rodeo?

There is a belt tensioner (spring loaded pulley that automatically keeps the belt tight) that needs to be temporarily slackened while the now loose belt is slipped off one of the accessories. Sorry, but I can't remember what tool is needed to loosen the belt tensioner. Just opening the hood and o...

Read more

How do you change a serpentine belt on a Mazda 3?

How to Replace a Mazda 3 Serpentine Belt Open the Mazda 3's hood and support it with the prop rod. Connect the belt-tensioner tool into serpentine belt tensioner and move the tensioner pulley away from the belt with the tool. Pull the belt off the engine accessory pulleys by hand. Stretch ...

Read more

How do you change the serpentine belt on a 1994 mercury cougar xr7?

with a 1/2" rachet or breaker bar placed in the square whole on the tensioner pully, you push (from passenger side to drivers) which will release the presure on the belt. Might want to draw a "map" of how the belt goes cause it ain't obvious when its off the car.

Read more

Do you have a diagram of how to put the serpentine belt on the pulley?

You may get an answer if you list the vehicle & engine you are talking about. You are not going to get an answer to this question as is.

Read more

How do you repair the serpentine belt on a 1998 Mitsubishi Galant?

You don't repair a serpentine belt. You replace the worn or broken belt with a new one.

Read more

How do you release serpentine belt on a 89 Mercury Cougar?

You have to release your tensioners in order to release your serpentine belt. When you put the belt back on you have to follow the diagram on the hood of your car.

Read more

How do you adjust serpentine belt on a 1999 Holden jackaroo?

On all U.S. vehicles that use A single serpentene the belt has an automatic tensioner. I suspect that your can does too. It could be stuck.

Read more

How do you tighten the serpentine belt on a 1997 Saturn?

You don't. The belt tension is automatically adjusted via a spring loaded tensioner. If the serpentine belt is noisy or worn out prematurely. replace the tensioner. The belt should be inspected for cracks and other signs of wear. Replace worn out belt(s) before they break leaving you stranded.

Read more

How do you get the accessory drive belt or serpentine belt off of a 1989 sunbird?

To remove the accessory drive belt or the serpentine belt from the motor on a 1989 Sunbird, it is necessary to loosen the belt tensioner. Look for a pulley that has a bolt in a slot. Loosen the bolt and move the tensioner so there is a gap in the belt. Then remove the belt from each pulley.

Read more

What happens if you put a serpentine belt on wrong?

REPLACING A SERPENTINE BELT.In some instances it may be possible to install a serpentine belt the wrong way.If this happens, one or more pulleys will rotate in the WRONG direction, affecting the operation of the alternator, water pump, A/C compressor or power steering pump.This can cause major pr...

Read more

How do you stop serpentine belt from squeeking?

Replace belt and check all pulleys for wear or rough spot

Read more

How long do BMW serpentine belts last?

With that being said most serpentine/drive belts can last for a very long time before they need to be replaced.The lifespan of the belt will depend mostly on the type of material it's made of.Older style belts generally last about 50,000 miles, while those made from EPDM can last up to 100,000 mi...

Read more

Can you put a serpentine belt on backwards?

you actually can put a belt on backwards.grooves go to grooves, and smooth goes to smooth.but you have to pay close attention to the belt routing diagram.if the belt is put on the wrong way it can spin the water pump reversed causing an overheat condition very fast after starting.

Read more

How do you replace ball joint on 1995 BMW 325is?

They are pressed in/out with a special tool that looks like a big c-clamp, they can be done on a press,but is more work/takes longer.

Read more

How do you do you find the serpentine belt diagram for a Toyota RAV4 2001?

There should be a diagram under the hood somewhere. Normally on the fan shroud. Click the link for a diagram. If you do not see one search with the term "2001 Toyota Rav 4 belt diagram" and you will find a diagram.

Read more

What does a serpentine belt do?

A serpentine belt is a single, continuous belt used to drive multiple peripheral devices in an automotive engine, such as an alternator, power steering pump, water pump, air conditioning compressor, air pump, etc.

Read more

How do you install serpentine belt on 88 Chevy silverado 4x4 350 auto?

Loosen tensioner and follow label (under hood) for routing

Read more

How much does it cost to replace a pulley and serpentine belt?

It is very inexpensive to replace a serpentine belt.The replacement cost is only going to be between $90 and $200 in most cases.The belt itself will cost between $25 and $75 while the labor costs will probably be between $75 and $120.Taxes and fees will be added onto these prices too.

Read more

What is the cost to replace serpentine belt?

It is very inexpensive to replace a serpentine belt.The replacement cost is only going to be between $90 and $200 in most cases.The belt itself will cost between $25 and $75 while the labor costs will probably be between $75 and $120.

Read more

How do you replace timing belt on 1999 Kia Sportage?

You should be able to find a shop manual for this at the local library...make copies of the right pages...good luck:)

Read more

How do you replace alternator belt on 99 eclipse?

Begin by loosening the tensioner pulley on your 1999 Mitsubishi Eclipse. The alternator belt will become loose and can be removed. Put the new alternator belt on and tighten the tensioner pulley.

Read more

How do you change disc brake pads on 1995 Chevrolet truck S-10?

The same as any other vehicle.

Read more

How do you change a timing belt on a 1995 Kia Sephia?

The Step by Step method is covered in your [http://wiki.answers.com/Q/How_do_you_change_a_timing_belt_on_a_1995_KIA_sephia Repair Manual]. Hope This Helps.

Read more

How can you bypass a serpentine belt on a 2002 converible sebring from the ac compressor?

You realy can't. If your intention is not to power the A/C unplug the wire that connects to the electric clutch. It should be right behind the pully.

Read more

How do you replace timing belt on seat leon 1.9tdi?

Replacing the timing belt is a very detailed task. It will include removing the engine. Timing belt replacement directions can be obtained from most auto-parts stores.

Read more

How do you you replace a valve cover gasket on a 1995 Dodge Intrepid?

Begin by removing the valve cover from your 1995 Dodge. Remove the valve cover gasket and clean the surface. Put the new gasket on and return the valve cover to its original position.

Read more

How do you replace timing belt on 95 avenger?

In order to replace your timing belt on your 1994 Avenger, you will need to first drain your cooling system. Remove the timing belt and mounting bolts and replace with your new belt.

Read more

Do you losen the altinator to change serpentine belt on a 94 Jimmy?

You'll have to loosen the alternator to get the belt off, unless you have a tensioner pulley in the sequence of the serpentine. yes it removes the tension to make it easier just did it last weekend.

Read more

How do you replace the front wheel bearinghub assembly on a 2000 Chevrolet Cavalier?

Pull wheel off, then brake caliper and rotor. There should be a senser on the back side of the wheel bearing, unplug it. On the outside of the bearing, there is a large nut, this must be removed. After that's gone, on the back side there are three bolts. These must be removed. The CV shaft, (aka,...

Read more

How important is a serpentine belt?

Well, it won't keep your pants up, but it does transport power to your vital automotive components.The serpentine belt is one long, snaking, winding belt that keeps your alternator, power steering pump, air conditioning and — in some cases — your water pump running smoothly and effectively.

Read more

How do you change alternator belt on a 1995 bobcat 853?

To change the alternator drive belt on a Bobcat 853 you start by lifting the cab. With the cab up, you can see the back of the engine and alternator. Locate the belts spring tensioner and release the belt.

Read more

How do you replace fuel pump in a 1995 s10?

The fuel pump is located inside the fuel tank so, siphon as much fuel out of the fuel tank as possible by removing the filler neck hose/assembly and slipping a siphon hose down into the fuel tank. This will make the removal of the tank much easier without the weight of excess fuel. Be sure to cap...

Read more

How do you replace a power steering pump on a 1995 Chevy Caprice?

You are going to need access from above and below so jack and support vehicle safely.If you can suck all the oil out of the pump, I use a cheap Turkey baster for this, the discard it when it turns to mush.The bolts that hold the brackets to the engine are fairly obvious and some have to be loosen...

Read more

How do you change the serpentine belt on a 2002 Chrysler town and country mini-van 3.8 engine?

There should be an idler pulley that you need to loosen to take belt off, draw a diagram of how the belt looks before you take it off so you can see how it goes back on.

Read more

What would make a 1995 Mazda 626 squeal on startup after drive belt has been replaced?

Drive belt(s) is/are not tightened enough would be my first guess.

Read more

How do you restart a 2000 alero that broke the serpentine belt?

Serpentine belts don't just break. There is probably an accessory that is locked up such as the alternator or a idler pulley. Check each pulley that the belts contacts and make necessary repairs before installing a new belt. Once you have done that just start the engine back up as you normally wo...

Read more

How do you know if the transimission needs to be replaced on a 1995 Camry?

Have it looked at by a professional transmission specialist.

Read more

How do you replace a rear main seal on 1995 Nissan Hardbody 4X4?

REAR CRANKSHAFT OIL SEAL R & I KA24e MotorRemovalRemove transmission/transaxle. Remove flywheel or flexplate.Remove rear oil seal retainer. Scrape old liquid gasket material offmating surfaces. Drive old seal out of retainer.InstallationInstall new seal into oil seal retainer using seal insta...

Read more

How do you replace the tag-illuminating light bulb on a 1995 caddy concorse?

above the tag there is a metal plate (open the truck lid for easier access) remove the two screws and the plate will com off. twist / turn the bulb sockets and the will come out from the actual lens housing. remove the bulbs and replace. put the bulbs back into the lens covers and twist /turn opp...

Read more

How do you replace water pump on a 1995 ford bronco?

A water pump is not really a water pump. It carries the fluid, antifreeze/coolant, from the the reservoir to the radiator/engine to keep it cool. It is now referred to as a "fluid pump"

Read more

Can you drive a car with a broken serpentine belt?

This is all because many cars have one serpentine belt that drives the water pump, the power steering pump, the alternator and the air conditioning compressor, and the fan.Some cars have an electric fan.It is best to not drive a car with a broken belt, even for a short distance.

Read more

How do you replace side view mirror on a 1995 Chevy Corsica?

The side view mirror on a 1995 Chevy Corsica is mounted by screws. Remove the screws and panel for the mirror on the inside of the vehicle. Pull and replace the unit.

Read more

How do you replace the Starter on a 1995 Isuzu rodeo 4wd?

Hi, How Do You Replace a Starter on a 1995 Isuzu Rodeo, V6, 3.2 liter engine? Does anyone know where the starter is? Help. How Do You Replace a Starter on a 1995 Isuzu Rodeo, automatic, 4wd, V6, 3.2 liter engine? Does anyone know where the starter is? Thanks alot.

Read more

Can a serpentine belt be put on wrong?

REPLACING A SERPENTINE BELT.In some instances it may be possible to install a serpentine belt the wrong way.If this happens, one or more pulleys will rotate in the WRONG direction, affecting the operation of the alternator, water pump, A/C compressor or power steering pump.This can cause major pr...

Read more

How do you remove and replace main bearings on a 1995 F-150 5.8 liter?

if you spun a main bearing then it is wise just to have the engine rebuilt.it is near impossible to fix mainbearing especially if it caused any damage to the crank shaft.

Read more

Can you drive a car with a bad serpentine belt?

This is all because many cars have one serpentine belt that drives the water pump, the power steering pump, the alternator and the air conditioning compressor, and the fan.Some cars have an electric fan.It is best to not drive a car with a broken belt, even for a short distance.

Read more

How do you replace a timing belt on a 2.4 Mitsubishi Eagle Summit?

Begin by removing all of the pulleys from the front of the engine. Remove the front engine cover. Remove the timing belt. Reverse the process to install the new timing belt.

Read more

Can you drive without serpentine belt?

Since the serpentine belt is generally the only accessory drive belt on vehicles these days, this is what you'll lose: Engine cooling* - The serpentine belt drives the water pump.Without the water pump, there will be insufficient coolant flow to maintain engine temperature, and you will overheat ...

Read more

What happens when the serpentine belt breaks on a car?

when serpentine belt breaks alternator and water pump stop working along with power steering pump

Read more

Is a serpentine belt the same as a timing belt?

A serpentine belt does more work than a timing belt.Timing belts synchronize the movement of the crankshaft and the camshaft while the serpentine belt transmits mechanical power which drives the air conditioner, water pump, alternator, etc.To replace a serpentine belt is easy because it is outsid...

Read more

How long can a car drive without a serpentine belt?

Not very long if it powers the water pump, -possibly 5-7 minutes before you overheat.

Read more

Can you drive with a bad serpentine belt?

This is all because many cars have one serpentine belt that drives the water pump, the power steering pump, the alternator and the air conditioning compressor, and the fan.Some cars have an electric fan.It is best to not drive a car with a broken belt, even for a short distance.

Read more

Can you drive a car without a serpentine belt?

As you can see, driving without a serpentine belt is not an option, at least not for very long.*Some cars have an electric water pump and/or electric assist steering.

Read more

How often should serpentine belt be changed?

How often does a serpentine belt need to be replaced? Serpentine belts are built to last—much longer than before because of advancements in rubber technology.Under ideal conditions, a belt should stick with you for an average of 60,000 to 100,000 miles.

Read more

How do you open the hood of a 1980 Camero?

most cars from that era have a release cable under the front bumper

Read more

Do you have a diagram of the serpentine route for a 1995 olds royale?

The 1995 Oldsmobile serpentine belt routing diagram can be obtained from most General Motors dealerships. The diagram can be found at most auto-parts stores.

Read more

How do you replace the timing belt on a 2009 Santa Fe?

If you have the 3.3 V6 engine it doesn't use a timing belt. It has a chain which requires no maintenance.

Read more

How do you replace the ac belt on a 95 truck?

You actually expect to get an answer. Would that be a Ford, Chevy, GMC, Dodge, Toyota, Nissan, or any other of the makes of trucks out there?

Read more

How do you replace the Timing Belt on a 1994 Ford Aerostar 3.0L?

There isn't a timing belt on the 3.0. This engine has a timing chain which would require extensive work in the removal of parts. You don't have to remove the radiator but will have to remove all of the front of the engine accessories on the front of the engine to get to the timing chain. Not an e...

Read more

How do you replace the two belts on a 1999 pick up 5 something v8?

You don't list the Make, Model, which belts, or engine size, and expect an answer. The only answer I can provide with the information you provided, is, take it to a professional for this repair.

Read more

At how many miles do you replace timing belt on a 2001 Honda Accord?

every 40 to 50 thousand miles or depend how much you drive it daily.

Read more

How do you replace the serpentine belt on a 1997 grand prix and there is apparently two designs of the 3.8 V6. so how do you know which design your motor is so that you order the right drivebelt?

The 3.8 could be factory supercharged or not. If it was supercharged it would be obvious.I don't know anything about two designs, i know there is a 3.1 and a 3.8 liter v6. in my 97,3.8 v6 there is a tension pulley, this pulley only puts tension on the belt so it stays on. use a big wrench to pull...

Read more

My crank shaft serpentine belt pulley is about one half inch out of alignment How can this be corrected 1995?

the only way this can happen is if the power steering pump shaft goes bad and forces the belt out of alignment. The crank shaft is ok

Read more

How do you know if your serpentine belt is going bad?

Symptoms of a Bad or Failing Serpentine/Drive Belt Squealing noise from the front of the vehicle. If you notice a squealing noise coming from the front of your vehicle, it could be from the serpentine belt. Power steering and AC not working. If the serpentine belt completely fails and breaks...

Read more

How long does a Toyota serpentine belt last?

With that being said most serpentine/drive belts can last for a very long time before they need to be replaced.The lifespan of the belt will depend mostly on the type of material it's made of.Older style belts generally last about 50,000 miles, while those made from EPDM can last up to 100,000 mi...

Read more

Can I change a serpentine belt myself?

Serpentine belt replacement is easy because today's automatic drive belt tensioners eliminate the need to loosen bolts or pry components into position for retensioning.Just rotate the tensioner, remove the old belt and install a new one.

Read more

How can you tell if you have a bad serpentine belt?

Symptoms of a Bad or Failing Serpentine/Drive Belt Squealing noise from the front of the vehicle. If you notice a squealing noise coming from the front of your vehicle, it could be from the serpentine belt. Power steering and AC not working. If the serpentine belt completely fails and breaks...

Read more

How do you route smaller serpentine belt on98 zx2 to bypass ac compressor?

The belt that I used my my 1999 ford escort ZX2 is a 6K730 to bypass the A/C. when routing the difference is the belt will come from the power steering to the tension pulley to the crank then water pump and the rest is normal. I hope this helps

Read more

How do you replace thermostat in 1995 f-150?

Drain about 1 gallon of coolant from radiator Follow upper radiator hose to engine area housing Remove housing and observe how thermostat is installed Clean both sufaces well Install new gasket and thermostat re-fill coolant Start engine and check for leaks Run engine up to normal operating tempe...

Read more

You replaced timing belt on 1999 Tahoe how do you set timing?

If you've already removed the timing cover there are markings on the top and bottom gears. Make sure they are lined up before putting the belt back on (if it has a belt) most chevys have timing chains. Anyway, once you've done that and reinstalled everything; the timing is adjusted by loosening t...

Read more

How do you replace door panel courtesy bulbs on 1995 Buick riviera?

Remove the door panel.

Read more

How do you replace a stator on a 1995 Harley road king What does the stator do?

Remove the cables from the 1995 Harley-Davidson Road Tank motorcycle starter. Remove the retaining bolts. Reverse the process to install the new starter. The starter turns the engine over so it can start.

Read more

Can I drive without a serpentine belt?

As you can see, driving without a serpentine belt is not an option, at least not for very long.*Some cars have an electric water pump and/or electric assist steering.

Read more

Routing new serpentine belt on 94 Plymouth Voyager?

When routing a new serpentine belt, make note of how the old belt was routed. Take a picture of the belt routing if possible. Also most cars have a sticker under the hood with the routing on it.

Read more