How do you install serpentine belt on 88 Chevy silverado 4x4 350 auto?

Cars & Vehicles
Serpentine Belts
DIY Projects
Ford Excursion XLT

Loosen tensioner and follow label (under hood) for routing

Previous questionMap of the Mille Miglia route?
Next questionHow much does it cost to ship a car from Germany to the US?

Related question

How do you change a serpentine belt on a Chevy Silverado?

Shop Products Familiarize yourself with the belt routing diagram.Insert a 3/8 inch drive ratchet into the belt tensioner.Pull the tensioner counterclockwise to loosen the belt.Pull the belt off the idler pulley.Release the tensioner.Pull the belt off and out.

Read more

How do you remove serpentine belt on 2005 Chevy Cobalt?

You have to release the stress in the tensioners to remove the serpentine belt. When you put it back on there is a diagram under the hood of the car that takes you step by step.

Read more

Where is the tensioner pulley to tighten the serpentine belt on a 2000 Chevy Silverado?

If you're standing at the front of the truck and looking into the engine compartment the tension pulley is on the left side about half way down.

Read more

How do you install a serpentine belt on a 99 Isuzu Rodeo?

There is a belt tensioner (spring loaded pulley that automatically keeps the belt tight) that needs to be temporarily slackened while the now loose belt is slipped off one of the accessories. Sorry, but I can't remember what tool is needed to loosen the belt tensioner. Just opening the hood and o...

Read more

How do you change a serpentine belt on a 2001 Chevy Suburban?

Read more

How do you install a running board on a 2010 Chevy Silverado?

Read more

How do you install a remote start on a Chevy Silverado 2004?

Directions come with the remote starter kit.

Read more

How do you install a oil pump on a Chevy 350?

How to Install A Chevy 350 Oil Pump Remove the engine from the vehicle if you cannot get the oil pan off while in the car. Remove the oil pan. Fit the new oil pickup to the new oil pump. Prime the oil pump with STP. Insert the oil pump up into the engine block, making sure the rod fits in...

Read more

How do you set serpentine belt tension on a Chrysler?

The tension on a serpentine belt is automatically set by the Idler Tension Pulley. If you find it is not correctly setting the tension, the the spring may be broken.

Read more

How do you replace serpentine belt on a fx 35?

1. Remove front engine undercover.2. Loosen idler pulley (alternator and power steering oil pump belt) lock nut and adjust tension by turning bolt.3. Same is done for the other idlery pulley (A/C compressor belt).

Read more

How do you replace serpentine belt on 2005 Equinox?

Begin by loosening the tensioner pulley on your 2005 Chevrolet Equinox. The serpentine belt will become loose and can be removed. Reverse the process to install your new serpentine belt.

Read more

How do you install tow hooks on 2014 Silverado 1500?

The front tow hooks just bolt on.

Read more

How do you change a serpentine belt?

How to Replace a Serpentine Belt Take a good look at both your repair manual and your belt routing diagram under the hood before beginning. Look at the way the old belt wraps around the pulleys. Locate the self-adjusting tensioner and know that you need to be careful when releasing tension ...

Read more

Auto belt tensioner how to install?

Put tensioner in vise careful not to damage it, squash the pin back inside and align hole, put a paper clip into it...reinstall w/ new belt and remove paper clip ....and tension is on belt and ready for service.The paper doesn't work need steel pin long enought that you can pull out after belt in...

Read more

How do you install seat belts in a 2004 Nissan 350 z?

You should not try to install seat belts yourself, it says so in your owners manual. Plus it is dangerous, because if you don't do it properly, you can kill anyone sitting in that seat. Take it a professional, A seat belt equals life!

Read more

What is the vehicle weight of a 1994 Chevy Silverado extended truck with 4x4 and a 350 Ci engine?

Stop by the dump and have it weighed...Tombo

Read more

How do you bleed brakes on 05 Chevy Silverado 1500?

Same as most vehicles, right rear, left rear, right front, left front.

Read more

How do you adjust lifters on 88 Chevy s-10 2.5 4 cylinder automatiic transmission?

Tighten rocker arm down to 35 lbs of torque and your all done. These lifters are hydraulic and self adjusting. If you still have valve clatter, you have worn valve train parts.

Read more

How do you obtain trouble codes on 99 Chevy Silverado?

Go to any auto parts store (O'Reilly, Auto Zone, NAPA, Advance, etc.). Most of them have an OBDII scanner and will diagnose fault codes on your vehicle free of charge.

Read more

How many belts does a Chevy Silverado have?

Check the Belts: 2014-2018 Chevrolet Silverado 1500 - 2014 Chevrolet Silverado 1500 LT 5.3L V8 FlexFuel Crew Cab Pickup.

Read more

How do you stop serpentine belt from squeeking?

Replace belt and check all pulleys for wear or rough spot

Read more

How do you align a serpentine belt pulley?

Read more

How long do BMW serpentine belts last?

With that being said most serpentine/drive belts can last for a very long time before they need to be replaced.The lifespan of the belt will depend mostly on the type of material it's made of.Older style belts generally last about 50,000 miles, while those made from EPDM can last up to 100,000 mi...

Read more

How do you tighten serpentine belt on 1993 Ford F-350 7.3l diesel so my power brakes will work again creating the nescessary vacuum?

7.3l diesel does not have an adjusment for the serpentine beltit is autmatically adjusted with the belt tensioner.if the tensioner is not keeping belt tight, replace the belt and check to see that tensioner is working correctly.most times if vaccuum pump is not working the power brakes, you need ...

Read more

How do you reroute serpentine belt to bypass ac compressor on 1995 town car?

If that model was available without a/c, you will need to purchase the belt for a 95 town car w/out ac, and follow the appropriate belt routing diagram for that model.

Read more

How do you fix seat belt on Chevy tracker?

You start by identifying what's wrong with it. Chances are, it's going to be something you'll simply replace.

Read more

How do you disable auto headlights on Canadian Chevy Volt?

That's easy.Just rip it out and put in new ones, just make sure you disable the wiring first.

Read more

Where can you find a diagram for installing a serpentine belt?

This should be on a sticker under the hood of the car, or in the owners manual, or available from your local auto parts store at no charge.

Read more

How do you change the serpentine belt on a 1994 mercury cougar xr7?

with a 1/2" rachet or breaker bar placed in the square whole on the tensioner pully, you push (from passenger side to drivers) which will release the presure on the belt. Might want to draw a "map" of how the belt goes cause it ain't obvious when its off the car.

Read more

Do you have a diagram of how to put the serpentine belt on the pulley?

You may get an answer if you list the vehicle & engine you are talking about. You are not going to get an answer to this question as is.

Read more

How do you replace a serpentine belt on a 1995 Chevrolet Camero?

Replacing the serpentine belt on both V6 & V8 rear drive engine are fairly easy than front wheel drive. The belt is located just between the front of the engine and the radiator. You have plenty of clearance to work. Just need to losen the tension and the belt should come out. Putting the new...

Read more

How do you repair the serpentine belt on a 1998 Mitsubishi Galant?

You don't repair a serpentine belt. You replace the worn or broken belt with a new one.

Read more

How do you release serpentine belt on a 89 Mercury Cougar?

You have to release your tensioners in order to release your serpentine belt. When you put the belt back on you have to follow the diagram on the hood of your car.

Read more

How do you change a serpentine belt on a 2001 Chrysler Town and Country?

How to Replace the Serpentine Belt in a Chrysler Town & Country Open the hood and find the belt tensioner pulley. Look at how the belt is routed around various pulleys. Use a wrench to rotate the belt tensioner pulley bolt and slide the old belt off of the tensioner pulley. Make sure y...

Read more

How do you replace the serpentine belt on a 1993 Mercury Cougar?

To remove the serpenteen belt on this vehicle, you must first locate the spring loaded tensioner. You will need a 1/2" breaker bar or a socket to recoil the spring load. doing this will release the tension on the belt. You can then remove the belt.NOTE: If you are just changing the belt with a ne...

Read more

How do you change a serpentine belt on a 2008 Toyota Corolla?

Read more

How do you adjust serpentine belt on a 1999 Holden jackaroo?

On all U.S. vehicles that use A single serpentene the belt has an automatic tensioner. I suspect that your can does too. It could be stuck.

Read more

How do you tighten the serpentine belt on a 1997 Saturn?

You don't. The belt tension is automatically adjusted via a spring loaded tensioner. If the serpentine belt is noisy or worn out prematurely. replace the tensioner. The belt should be inspected for cracks and other signs of wear. Replace worn out belt(s) before they break leaving you stranded.

Read more

How do you change a serpentine belt on a Mazda 3?

How to Replace a Mazda 3 Serpentine Belt Open the Mazda 3's hood and support it with the prop rod. Connect the belt-tensioner tool into serpentine belt tensioner and move the tensioner pulley away from the belt with the tool. Pull the belt off the engine accessory pulleys by hand. Stretch ...

Read more

How do you get the accessory drive belt or serpentine belt off of a 1989 sunbird?

To remove the accessory drive belt or the serpentine belt from the motor on a 1989 Sunbird, it is necessary to loosen the belt tensioner. Look for a pulley that has a bolt in a slot. Loosen the bolt and move the tensioner so there is a gap in the belt. Then remove the belt from each pulley.

Read more

How do you tighten auto fan belt?

first you have to locate the allready plced soket and then just tighten the belt

Read more

What happens if you put a serpentine belt on wrong?

REPLACING A SERPENTINE BELT.In some instances it may be possible to install a serpentine belt the wrong way.If this happens, one or more pulleys will rotate in the WRONG direction, affecting the operation of the alternator, water pump, A/C compressor or power steering pump.This can cause major pr...

Read more

Why in your 88 Chevy 4x4 front differential leaking oil through its vent hose?

The first thing that comes to mind is its overfull of oil..but since there is no real way to check the level, it should stop leaking. yes...stop leaking on its own. if you have been driving the truck in and out of mud holes, this will cause it to leak also... the differential is hot before it hit...

Read more

How do you add a trailer light plug to your 88 mighty max 4X4?

find wiring harness in the back of the vehicle the same one that goes to the tail lights wire it through that wiring harness use test light to make sure you arein the right wiring harness

Read more

Change belt on 1996 oldsmoblie 88?

Yeah u can all u have to do is loosen the belt tensioner and take the old one off put new one on then tighten tensioner

Read more

How do you install a intake manifold gasket on 03 Chevrolet silverado?

there is a finite amount of information that will fit in this box, buy the service manual for the vehicle it is a long and complicated proceedure to explain here.

Read more

Can you put a serpentine belt on backwards?

you actually can put a belt on backwards.grooves go to grooves, and smooth goes to smooth.but you have to pay close attention to the belt routing diagram.if the belt is put on the wrong way it can spin the water pump reversed causing an overheat condition very fast after starting.

Read more

How do you do you find the serpentine belt diagram for a Toyota RAV4 2001?

There should be a diagram under the hood somewhere. Normally on the fan shroud. Click the link for a diagram. If you do not see one search with the term "2001 Toyota Rav 4 belt diagram" and you will find a diagram.

Read more

How do you change a head light on a 1992 Chevy silverado?

take the old ones out and put new ones in!

Read more

How much horsepower does a 1992 Chevy k1500 4x4 truck with a 350 engine generate?

The L05 version of the Chevrolet 350 c.i.d. engine was introduced in 1987 for use in Chevrolet/GMC trucks in both the GMT400 (introduced in April 1987 as 1988 models) and the R/V series trucks such as the K5 Blazer, Suburban, and rounded-era pickups formerly classed as the C/K until 1991 which in...

Read more

How do you get more vacuum with your 350 Chevy?

the easiest way... valve and timing adjustments doesnt mean itll work right though

Read more

How do you identify brake system on 96 Chevy silverado 2500?

There's a parts identification label sticker inside the glove box. It contains a bunch of 3 digit "RPO"(Regular Production Option) codes. You'll find JD5 or JB7. I don't know what the specific brake system codes are for that truck, those are just a couple of examples.

Read more

How do you trouble shoot the ABS on a 2001 Chevy silverado 1500?

Assuming the ABS light is on, start with having the codes read. Your local auto parts store can help you with that at no cost.

Read more

How do you remove the door panel on a 2014 Chevy Silverado?

Read more

How do you add R134A to a 1999 Chevy Silverado?

You can pick up a kit from your local auto parts store. The kit will contain directions to help you BUT if you have a leak your wasting your money and polluting the atmosphere in the process. Take the vehicle to a pro.

Read more

How do you reset the check engine oil light on a Chevy Silverado?

If you have the controls on your steering wheel than all you have to do is push the button with the little gas pump logo on it until engine oil life and the % come up on the little screen, then hold down the arrow button (lower right) for 5 or so seconds and it will say oil life reset and it will...

Read more

How do you remove the front drive shaft on a 2000 Chevy Silverado?

Read more

How do you take out a broken speed sensor on a 2005 Chevy silverado?

Assuming you mean the vehicle speed sensor, it'll be located atop the transmission near or on the transmission output. Disconnect the wiring (should be a simple weatherpack terminal), then unbolt the VSS.

Read more

Can you replace a serpentine belt yourself?

Serpentine belt replacement is easy because today's automatic drive belt tensioners eliminate the need to loosen bolts or pry components into position for retensioning.Just rotate the tensioner, remove the old belt and install a new one.

Read more

What does a serpentine belt do?

A serpentine belt is a single, continuous belt used to drive multiple peripheral devices in an automotive engine, such as an alternator, power steering pump, water pump, air conditioning compressor, air pump, etc.

Read more

Do you losen the altinator to change serpentine belt on a 94 Jimmy?

You'll have to loosen the alternator to get the belt off, unless you have a tensioner pulley in the sequence of the serpentine. yes it removes the tension to make it easier just did it last weekend.

Read more

How do you fix joe's Chevy 350 small block?

Need to know what is wrong with it before we can help Joe fix it.

Read more

How do you set timing on Chevy 350 with a RV cam?

In a jam without a timing light or a vacuum gauge for reference, I would advance the timing a little at a time and test drive the vehicle between adjustments until I heard the engine ping under load, then retard the timing just to the point the pinging stops.

Read more

Can you drive without serpentine belt?

Since the serpentine belt is generally the only accessory drive belt on vehicles these days, this is what you'll lose: Engine cooling* - The serpentine belt drives the water pump.Without the water pump, there will be insufficient coolant flow to maintain engine temperature, and you will overheat ...

Read more

How do you take pressure out of a gas line on a Chevy silverado 2002?

On a cold engine I unhook the battery ground and then (if you are changing a fuel filter) just loosen it to relieve pressure. No matter where you relieve pressure, there will be spillage so use a drip pan. As long as the battery is disconnected the chance of fire is greatly reduced. There is a sc...

Read more

How do you reset oil change light on 1999 Chevy silverado 1500?

key on engine off press accelerator pedal to the floor five times very rapidly should reset

Read more

How do you change backup light on 1994 Chevy silverado automatic?

Open the tailgate and notice two Philips head screws. Remove the screws and wiggle out the taillight assembly to gain access to the back of the assembly to r&r all the bulbs.

Read more

How do you remove the door panel on a 2007 Chevy Silverado?

Read more

How do you repair electric door locks on a 1997 Chevy silverado 1500?

Kinda depends on what's wrong with them, which is why you diagnose the problem first. If your key works for locking and unlocking the doors, and they open and close fine, you can rule out the door latch. If you just hear a buzzing sound when you press the lock/unlock button, then it's your actuat...

Read more

How do you get trouble codes on a 99 Chevy Silverado?

Your local auto parts store will read your codes and advise you what your next step should be. Most auto parts stores will provide this service for free.

Read more

How do you adjust the valves correctly on 1976 Chevy 350 when it won't start?

Assuming the lifters are hydraulic, adjust each valve when FULLY closed to zero lash then turn in one additional turn, done.

Read more

Do you tip auto glass installers?

I normally tip those who go above and beyond the call of duty (aside from people that make their living from tips- waitress, pizza delivery, etc. Which you would automatically tip regardless).

Read more

How do you install a new fuel pressure regulator for a 88 ford bronco 302?

Remove the fuel pump and relieve the fuel system pressure. Disconnect the fuel line then fix the fuel pressure gauge. Reconnect the fuse to the fuel pump and start the engine to check leakage. Tidy the surrounding of the fuel pressure regulator.

Read more

How do you install an alternator belt on a landrover tdi200?

There are two bolts to loosen, one at the top of the alternator and a smaller one underneath on a bracket. Loosen these and push the whole unit down this will loosen the belt so it can be replaced then use a lever to pull up the unit while tightening the bolts

Read more

How do you install a timing belt on a 1992 Toyota Camry?

How do you install a timing belt on a 1993 Toyota Camry that has a 2.2 liter engine

Read more

How do you check the air conditioner relay on 1992 Chevy silverado 4.3 liter?

there are more than one relay in the box change places with one of the others and see if it starts working

Read more

How do you change the fuel filter on a 2012 Chevy Silverado 1500 ext cab?

You don't. It is considerd a non servicable item. It is part of the fuel pump module.

Read more

How do you change front shocks on a 2007 Chevy silverado 1500 LS 2 wheel drive?

You first need to jack up the front you are working on from the lower ball joint. Then you only need to unscrew the top mount nut and remove the 2 lower mounting bolt and slide the shock out the bottom of the lower control arm. Reverse the procedure to install the new shock. Repeat the steps on t...

Read more

How do you tell if your water pump is bad on Chevy 350?

The most obvious symtom would be overheating of the engine.

Read more

How often should serpentine belt be changed?

How often does a serpentine belt need to be replaced? Serpentine belts are built to last—much longer than before because of advancements in rubber technology.Under ideal conditions, a belt should stick with you for an average of 60,000 to 100,000 miles.

Read more

How do you install tachometer on DIS system on a 1996 Chevy Cavalier 2.2L?

I have the tachometer adapter but I'm unsure as to where I splice the wires.

Read more

How can you bypass a serpentine belt on a 2002 converible sebring from the ac compressor?

You realy can't. If your intention is not to power the A/C unplug the wire that connects to the electric clutch. It should be right behind the pully.

Read more

How do you install a serpine belt on a isx cummin i a semi truck?

Run the top half of the belt through the fan blades, rotate the fan 180 degrees, then pull that half back through the fan blades.Go around the crankcase pulley and the camshaft pulley, go under the tensioner pulley, over the AC compressor pulley, under the idler pulley, and back over the crankcas...

Read more

How do you install a timing belt on a 99 plymoth vayager?

How far are you in the process? Respond to me at [email protected], it is not a easy job. I done a few on Dodge's.

Read more

How important is a serpentine belt?

Well, it won't keep your pants up, but it does transport power to your vital automotive components.The serpentine belt is one long, snaking, winding belt that keeps your alternator, power steering pump, air conditioning and — in some cases — your water pump running smoothly and effectively.

Read more

How do you get the tensioner to move on 1988 caravan to replace serpentine belt having a diffucut time trying to get belt on?

You don't mention which engine but on my 90 3.3 I put a wrench on it and just move it. It's kinda hard.

Read more

How many miles can a Chevy Silverado go on Empty?

Of course, every car is different, but most models give you at least 30 miles' worth of warning before the tank is empty.Even a big truck like a Chevy Silverado will run for another 33 miles before it runs out of gas.

Read more

How do you change the serpentine belt on a 2002 Chrysler town and country mini-van 3.8 engine?

There should be an idler pulley that you need to loosen to take belt off, draw a diagram of how the belt looks before you take it off so you can see how it goes back on.

Read more

How do you know if your serpentine belt is going bad?

Symptoms of a Bad or Failing Serpentine/Drive Belt Squealing noise from the front of the vehicle. If you notice a squealing noise coming from the front of your vehicle, it could be from the serpentine belt. Power steering and AC not working. If the serpentine belt completely fails and breaks...

Read more

How do you install halo headlights on a 2007 Chevy Cobalt?

full instructions as to how to install cobalt halo projector headlights.

Read more

How do you route smaller serpentine belt on98 zx2 to bypass ac compressor?

The belt that I used my my 1999 ford escort ZX2 is a 6K730 to bypass the A/C. when routing the difference is the belt will come from the power steering to the tension pulley to the crank then water pump and the rest is normal. I hope this helps

Read more

How do you install 06 Chevy duramax diesel shifter cable?

you just have to disconnect the shifter, take the old wires out then re wire the new ones in there

Read more

How do you restart a 2000 alero that broke the serpentine belt?

Serpentine belts don't just break. There is probably an accessory that is locked up such as the alternator or a idler pulley. Check each pulley that the belts contacts and make necessary repairs before installing a new belt. Once you have done that just start the engine back up as you normally wo...

Read more

How do you bleed the brakes on a 2000 Chevy S-10 after installing new front pads?

If you just installed the pads, and didn't open up the hydraulic system (e.g., cracking the bleeder or disconnecting the brake lines), there's no need to bleed it.. just pump the foot pedal a few times and it'll sort itself out. Otherwise, there's a couple ways to to about it... one way requires ...

Read more

What kind of transmission is needed for a lifted Chevy Silverado v8 4x4?

The Silverado name has been used both for a trim package for the C/K pickups and as a standalone model. Several transmissions were available during this time, as were engine options. We'd need much more info about your vehicle, including the model year and WHICH V8 engine it has - if you end up m...

Read more

Chime won't stop on Chevy Silverado?

If the chime won't stop on your Chevy Silverado, you can remove the chime fuse in order to make it stop. Open the fuse panel and choose the fuse that is marked 'chime module.'

Read more

Where could you find an illustration on replacing serpentine belt on '97 Buick Park Avenue?

There should be an illustration in your ownners manual.Just had mine done.. mechanic had to remove psgr side motor mount to release belt. Not a fun job.trust me this ne job you want to pay someone to do, you need to lower the engine cradle to remover the PS motor mount,you could also visithttp://...

Read more

Routing new serpentine belt on 94 Plymouth Voyager?

When routing a new serpentine belt, make note of how the old belt was routed. Take a picture of the belt routing if possible. Also most cars have a sticker under the hood with the routing on it.

Read more

Can a serpentine belt be put on wrong?

REPLACING A SERPENTINE BELT.In some instances it may be possible to install a serpentine belt the wrong way.If this happens, one or more pulleys will rotate in the WRONG direction, affecting the operation of the alternator, water pump, A/C compressor or power steering pump.This can cause major pr...

Read more

Why cant you detension the serpentine belt tentioner the bolt keeps rotating and not letting you get the belt on?

because the bolt is striped or you pulley is no bad take it off and get another one

Read more