How do you install car speakers?

Previous questionCan a cold house make you ill?
Next questionHow many moving parts are in a car engine?

Related question

How do you install speakers in vt commodore doors?

its acyually easy im 14 and i know how get a drill and some screws some wireing and some nice speakers take the door out make a mold for it set it in there drill the screws in and get the wiring in

Read more

How much does car speaker installation cost?

For a pair of car speakers, Columbus Car Audio & Accessories start prices at $39, with an average cost of about $70 for installation.Adding an anti-vibrator to a pair of speakers costs another $25.

Read more

How much does Car Toys do installation on speakers if bring in your own speakers?

Depends on how difficult the job is. Personally, I've bought items from Car Toys before, but I wouldn't have them install anything.

Read more

How can one install the Bluetooth car speaker?

There is a very easy way for one to install the Bluetooth car speaker. One can install the Bluetooth car speaker by plugging the device into the car's built-in stereo system.

Read more

How do you get car speakers fixed?

If your speakers has blown or it is not as appealing as you would like you can either go to the car dealership and purchase a replacement speaker or go to an audio store and purchase new ones from them. If you are looking to improve the sound without spending all of the money, i would recommend b...

Read more

How do you fix car speakers?

there will be 2 wires one black and one redso jst connect them to your music system and enjoy listening to songs

Read more

How do you measure car door speakers?

Read more

How do you unplug car speakers?

Please let me know what type vehicle this is and I can assist you with this.

Read more

How much does it cost to get speakers installed?

For a pair of car speakers, Columbus Car Audio & Accessories start prices at $39, with an average cost of about $70 for installation.

Read more

How much is Speaker installation at Best Buy?

Answers.A: Thank you to reaching out to us here with your question.These installation services depend on what type of speaker you would like installed.The $99 service is for component speakers.

Read more

How do you install 2 car amps?

you can split the RCA signal or Half Din Size; Pre-amp Inputs Via Gold Plated RCA Jacks; Master gain/Independent Band Control; 6 Channel RCA Outputs; 7 Band Graphic Equalizer; 12dB Boost/Cut; Subwoofer Gain Control; Frequency Gain Control; LED Power Level Meter; Remote Power On/Off; Fully Isolate...

Read more

How do you install vinyl car wraps?

Well it's better to let the experts in Car Wraps do that to make sure that you'll have a flawless result..

Read more

How do you install car siding?

Cars do not have siding's.

Read more

How do you install car mirrors?

You get super glue and glue it in.

Read more

How do you wire speakers?

Read more

How do you put car speakers in a car?

You need to wire it to your radio i reconen that if you put under the carpet it will look a lot better

Read more

How do you installed a car lock?

Without knowing what type of lock you are referring to, this is impossible to answer.

Read more

How do you take Car Audio Speakers a part?

To be honest you really dont. If you are tring to repair one post that ?'s and maby i can help you with that. To be honest you really dont. If you are tring to repair one post that ?'s and maby i can help you with that.

Read more

How much does it cost to get speakers installed in your car?

For a pair of car speakers, Columbus Car Audio & Accessories start prices at $39, with an average cost of about $70 for installation.

Read more

How do car speakers work?

Car Audio - How Do Speakers Work.This current reaches the voice coil inside the speaker, creating an electro-magnet that will either be repelled, or attracted by the fixed magnet at the bottom of the speaker.The voice coil is attached to the cone, moving it back and forth, creating sound.

Read more

How do you hook up car speaker to a raido?

it all depend wat year and wat car you have then i can help you i real good with car you can reach me at http://profile.myspace.com/index.cfm?fuseaction=user.viewProfile&friendID=55010026 save me an write me

Read more

How do you fix a rattling car speaker?

NOICO Sound Deadening Mats Remove Items from the Pockets in the Door Panels.Locate the Speaker Creating the Problem.Inspect the Speaker Mounting for Loose Screws.Determine Whether the Rattling Comes from a Blown Speaker.Use a Car Speaker Enhancement Kit to Reduce Rattling.

Read more

How do you install a car stereo with amplifier speaker box and CD player together and you also will need to know wiring?

I have done this many many times. First you'll needsome thick gauge wire to run to the amps + screw, 4 gauge should do unless it's not that big of an amp then you can go little smaller 8 gauge or so then put an inline fuse check the one on the amp and match it and run it directly to the batterys ...

Read more

How do you check the polarity on a car speaker?

With a simple flashlight battery.Connect wires to the speaker then breifly touch the wires to the battery and watch the speaker.If you have positive to positive and negative to negative the speaker will "push outwards" if you have it reversed it will "suck inwards"

Read more

How do you remove a hum in your car speakers?

add a ground wire between the engine and the body

Read more

How do you check speaker wire polarity?

Set the multimeter to measure DC voltage, and touch the speaker wires to the probes.If your probe is touching a wire with an opposite polarity, such as the positive probe to a negative wire, you will get a negative numerical reading.Try switching which probe you're using to get a positive reading...

Read more

Is there a guide that will show how to install speakers in your car?

When you purchase speakers, they will come with the directions to install them. If there are no directions, you may call the company and request a guide. They will either send one to you, or send you a link to an online version.

Read more

How do you measure speaker size?

In wats, an average nice system has about 250 wats

Read more

How do you change door speakers?

Open The Door, Remove The Door Panel, Remove Speaker, Wire The New Speaker, Fix The Speaker To The Door, Refix Door Panel, Switch On

Read more

How do you connect different speakers together?

Connect using a combination of the two connections.Connect two speakers using series mode and then use a split cable to connect a second set of speakers.Connect all of the speaker sets together and then connect the single end of your cable into the negative jack on your amplifier.

Read more

How do you test speaker wire polarity?

Observe polarity and touch a 1.5 volt battery to the terminals and note the direction the speaker cone moves.

Read more

How do you test speaker wires?

Test Your Wire Touch the two probes of the multimeter to the bare speaker wires of the circuit.Make sure you do this on the two wires that you didn't twist together.If your multimeter shows infinite resistance, then there is a break or cut somewhere along the wire.This indicates that it is time ...

Read more

How do you hook up old speakers?

How to Connect Old Stereo Speakers to Newer Equipment Strip off any old speaker wire that may be green or brown with corrosion. If the speaker wire ends have RCA jacks -- and the new receiver doesn't incorporate those -- cut them off.Strip back the speaker wire approximately 1/2 inch. Twist ...

Read more

How do you install a hand control in a car?

this must be completely legalised, so you will have to find a qualified fitter. also it will have to state on your license that you are using hand controls, and all legal stickers must be kept on the car to say that they have been installed properly. depending on what car you have however, it cou...

Read more

How do you install an oil pump on my car?

Well, you have to pull the engine, and tear off the oil pan to access it.pretty much any motor will be the same, it's mechanical and is powered off the crank or sometimes the intermediate shaft.it's a bear of a job, though.

Read more

How do you install a remote car starter?

Basic Steps of Remote Start Installation: Attach the ground wire to the chassis of the vehicle.Attach it to the starter to start the circuit.Connect the ignition output from the remote starter to the car's ignition wire under the steering wheel.Locate the starter wire and test it with a multimeter.

Read more

How do you install a thermostat in a car?

Read more

How do you install a Graco car seat base?

Read more

How do you install a new car battery?

connect negative side first

Read more

How do you install tv monitor in your car?

you need a instruction manual of car monitor

Read more

How do you install amplifier and subwoofer in a car?

I have a very basic Sony deck in my car. It has sub out and sub amp control connections on the back.You will need these connections.Next I found a spot to mount the amp and where and how the sub would go in the back. I planed out and used a piece of chalk to mark the mount location and orientatio...

Read more

How do you install a head unit in a car?

Read more

How do you install a car seat base?

Read more

How do you install a Garmin gps in the car?

A normal Garmin comes with a car charger and windshield mount (suction cup), all you need do is plug it in and find a spot on the windshield that will not interfer with your vision, this is normally on the right side close to the dash. Avoid looking at it when the vehicle is in motion, it is bett...

Read more

How do you install infant car seat covers?

Read more

How do you install a Britax Boulevard car seat?

Read more

How do you install an air horn on a car?

There is no one easy answer for this, as a specific answer will depend on alot of factors including the size of your car and the available space, as well as the amount of money you're willing to spend on the system. A cheap system can be had for about $20-$30 from many auto parts stores. They usu...

Read more

How do you install amp and subwoofers in car?

To install a amp, You will need to purchess a wiring kit. You will see three screws on the amp, One that says, pos another that says neg/gnd and another that says rem. The one taht says pos is positive. That is where you put the red wire. The red wire connectes to your battery, before connecting ...

Read more

How do you install an audio system in your car?

This is not something that should be done unless you have a thorough understanding of how audio systems work. You may end up damaging your vehicle, possibly even affecting its functionality. You should either consider consulting a professional on the topic, or having a professional install it the...

Read more

How do you install a Britax car seat?

Read more

How do you install a car audio capacitor?

power cable goes from battery to cap + terminal. separate power cable from cap + terminal to the amp. make sure the amp and cap are grounded.

Read more

How long do car speakers last?

as to your question - you should get at least five years out of speakers, 10 or more is easy to attain.regular use at low-to moderate volumes is best for longevity, but a good speaker can take a lickin' and keep on tickin' (so to speak).

Read more

How do you install cambearing in1989305?

you need a cam bearing installation tool

Read more

How do you install a seatbelt?

You simply scrunch it up and watch it suffer! Job done!

Read more

How do you install 3pc grille guard?

Depends, what type of vehicle is it going to be installed on?

Read more

How to install 6x9 sperakers into a vehicle that takes 6x8 speakers?

# Cut holes in the rear deck# Drop your speakers# 4 screws and the job is doneBe careful don't weld them!

Read more

How do you install my GPS?

well what u do is plug it in the cigarette lighter then it will turn on but if it does not then there should be a little slide button then slide that then ur already

Read more

How do you install capacitor to amp?

First ground your amp and cap, amp has a ground slot usually and connect the caps negative terminal to a ground. then you take the power cord running from your battries positive terminal to the poitive terminal on the cap. also hook up a power cord running from your amps power input to the positi...

Read more

How do you install hid lights?

Generally:This will vary from manufacturer to manufacturer, and your HID kit should come with instructions.

Read more

How do you install Saddleman seat covers?

Bucket Seats Installation Remove headrests. Loosely fit back and bottom sections of the seat cover by sliding directly over the cushions. Locate material flap on inside of seat cover. Secure backrest by sliding flap neatly between the top and bottom cushion.Locate bungee and hooks on bottom ...

Read more

How do you install a helicoil tool?

Installation is possible using manual or mechanical installation tools or automated systems.Screw the HELICOIL® Plus thread insert onto the installation mandrel with the driver tang facing downwards (1), insert it into the prewinder (2) or place it on the fly-over tool (3), and place the tool on ...

Read more

How do you install trunk struts?

How to Replace Trunk Strut Open the trunk. Photo may not be specific to your vehicle.Prop open the trunk.Remove the retainer bolts from the top and unscrew lower end of the old shocks. Remove the weak trunk strut. Install the new strut. Remove prop rod.Inspect and test the trunk to verify ...

Read more

How do you install an inverter?

Read more

How do you install coaster brakes?

Installing the Coaster Brake Slide the coaster brake reaction arm onto the axle and then secure it.Put the first bearing beside the coaster brake.Install the cluth assembly on the axle then place the brake pads on the clutch.Slide the intermediate bearing on the axle then place the axle into the...

Read more

How do you install a second battery?

If you wish to install 2 batteries and keep the same 12 volt supply then connect them in Parallel. You will double the capacity (Amp Hours) but still have 12 volts. Click the link to see a parallel connection.

Read more

How do you install refrigerant into B3000?

under the hood you will find a steel line about a half to an inch across that runs into the AC compressor. This line will have a valve on it with a plastic cover that looks like a valve stem on a tire. unscrew that cap and add your refrigerant accordingly.

Read more

How do you install wet vinyl decals?

Wet Vinyl Installation Instructions Tape vertically in the middle to create a hinge. -Get the surface and vinyl adhesive wet. Small vinyl lettering and decals should be installed dry. Mix 1 or 2 drops of liquid dish soap in a spray bottle of water. Remove the liner on one side. -Push the wat...

Read more

How do you install a brake switch?

How to Replace a Brake Light Switch Open the driver door of the car and kneel down inside so that you can see and reach the underside of the dash, where the pedals connect.Remove the two or four Phillips-head screws that are behind the brake pedal and that hold the electrical cover in place. ...

Read more

How do you install Ledglow interior lights?

Read more

How do you install a chevy350 trans?

well for an automatic trans there isn't much to it. apart from lining up the transmission and engine and bolting them together there is just oil cooler lines that need to be routed to the oil rad. and the speed sensor near the output end of the tranny needs to be hooked up. Dip stick needs to be ...

Read more

How do you install a crossover?

I suppose you are talking about one to an amp. If so, you have to hook up a positive from one side to the negative of the other.

Read more

How do you install a new key?

If you'd like to replace a lost key, nearly any locksmith can obtain a key code by calling in your VIN number. If you need to lock out a previous owner or ex from your car, you can either replace all of the lock cylinders or the existing cylinders can be disassembled and configured to operate wi...

Read more

How do you install rear seat covers?

Read more

How do you install a powered subwoofer?

Read more

How do you install a band expander?

TRY HERE: http://cgi.ebay.co.uk/JAP-IMPORT-FM-RADIO-WAVE-BAND-EXPANDER-TOYOTA-SUBARU_W0QQitemZ110183169215QQihZ001QQcategoryZ14932QQtcZphotoQQcmdZViewItemQQ_trksidZp1742.m153.l1262

Read more

How do you install glow plug?

how to install glow plug on ford f350 l997

Read more

How do you in stall climate control?

Install is one word! Are you asking how to change the climate control module? climate control switch? or are you asking how to install a complete heating or air conditioning system into a vehicle? also you DONT say for which year, make or model vehicle, they are NOT all the same!, try rephrasing ...

Read more

How do you install an overdrive switch?

If the vehicle does not have an overdrive, then realistically, you can not.

Read more

How do you install a blower motor?

Locate the heater and A/C blower motor under the passenger side dash. Disconnect the blower motor electrical connector.Remove the retaining screws to the blower motor assembly.Remove the box and blower motor assembly.Remove the blower motor retaining screws.

Read more

How do you install exhaust tips?

Exhaust Tips Installation Make sure your exhaust tips will fit the diameter of your tail pipes. Check that you have proper clearance from your bumper cutouts. Using WD-40, lube up your exhaust tips and fit them onto the tailpipe. Either tighten the screws or weld on your tips.

Read more

How do you remove front door speakers from 2006 trailblazer?

By taking the door panel off then fixing from their.Remove the hidden screws under the plastic tabs in the door handles. Unplug electrical. start slowly prying at the plastic plugs from the bottom then lift it off.

Read more

When installing car speakers what is the best position for the subwoofer?

There are a few positions for the sub woofers in a car. However the best place as to not destroy a persons ear drums and give the most room is in the trunk of a car.

Read more

How do you change Envoy 2004 XUV speaker?

It depends on which speaker it is. Some speakers might only have a small cover you have to take off for others, like door speakers you may have to take off the door panel. You can do that by looking all the way around and locate all the screws and clips holding the panel on and pop it off. if it ...

Read more

How do you fit rear speakers into commodore VZ Ute?

you dont need them just get some better quality fronts and a sub = sorted :)

Read more

How do speakers get damaged?

Over-Powering Low Frequency Speakers (subwoofers) Electrical failure occurs when applying to much power to the subwoofer(s) and causes the voice coil(s) to "burn".This can be the result of incorrect gain settings or improperly wired subwoofers, which can cause a low impedance load on the amplifier.

Read more

Why do you hear your car engine through your speakers?

Either due to a bad ground or a bad amp.

Read more

How do I choose a car speaker amplifier?

Read more

How do I fit speakers in my car?

Read more

How do I know if my car speakers are blown?

Signs of a blown car speaker Distortion at Moderate Volumes. The unmistakable hiss or “fuzz” that comes from a partially blown speaker is tough to miss once you know what to listen for. System Range Is Incomplete. Bad speakers under-perform for a variety of reasons. There's No Vibration. I...

Read more

How much do new speakers cost in car?

For a pair of car speakers, Columbus Car Audio & Accessories start prices at $39, with an average cost of about $70 for installation.Adding an anti-vibrator to a pair of speakers costs another $25.

Read more

How do you know if a wire is carring current for the speakers in a vechiles?

With the system powered on and playing sounds measure the voltage at the speaker terminals with an AC voltmeter. If you measure voltage turn off the system and disconnect one of the speaker terminals and measure across the speaker with an ohm meter. If there is any significant conductance the wir...

Read more

How do you fix a whistle coming from a car speaker?

well... it depends on the model of the car.but i do know if it is a Honda you should take it to the dealership to have it fixed because they know how th fix that prob.

Read more

How can you tell if a car speaker is blown?

Here are the main signs that car speakers have blow out: Distorted sound, hissing, and fuzziness. Telltale popping or rattling instead of music. Lack of bass, treble, or mid-tones. Lack of vibration from the speakers. Checking speakers for impedance.

Read more

How do you install 6x9 in a pug 106?

you'd need to install 5 more wheels and make 6 wheels driving wheels.

Read more

How do you remove and install driver side door handle?

1997 Chevy astro may bad. There is a "C" clip located behind the handle. The C clip needs to be removed to allow the handle to slip off. A simple tool is available at your local auto parts store for aprox $5 that will remove that clip easily without damage to the handle or the panel.

Read more

How do you install radio in 1992 dodge ram van?

There is a panel in front of dash ,remove screws underneath open drivers side door another one there ,open glove box another one there. Now just pull off towards you carefully .That will expose the radio screws and wiring once you remove its screws. You can buy a after market wiring harness to pl...

Read more

How do you install fuel pump on olds achieva 1997?

You buy tools and install it!

Read more

How do you install bearing races in truck wheels?

I have done it enough times that I know your best bet is a bearing race driver tool, but I have done it with a lot of different things. Once the old one is out center the race in the hub and using the tool, or something like a big socket that is the exact size as the outside edge of the race, I h...

Read more

How do you install radio in 1985 toyoto truck?

Use the factory radio brackets to mount the new radio to. If there is no radio you can order new brackets online. Otherwise you will have to trim the bezel around the radio opening in order to fit the DIN size radio sleeve. Ignition, ground and speakers wires should all be in the factory location...

Read more

How do you install a blower resistor in Mitsibushi Lancer?

under the glove box look for four wire plug connected. remove screws and resistor is out

Read more