How do you construct a reduction gear?

Cars & Vehicles
Asian Cars
Suzuki

its formed or made of metal and has to be hardened.

Previous questionHow many cars cross the George Washington bridge?
Next questionDo different car tire brands give different ride?

Related question

What is function gear reduction?

Reduction in gear ratio form one gear to another such as a rear axle ring & pinion gear allows each component to complete revolutions per minute at different speeds in relation to one another. this can allow more power from an engine to be transmitted for example to the drive shaft as the dri...

Read more

Does gear reduction increase torque?

Gear Reduction.The rotary machine's output torque is increased by multiplying the torque by the gear ratio, less some efficiency losses.While in many applications gear reduction reduces speed and increases torque, in other applications gear reduction is used to increase speed and reduce torque.

Read more

When driving near a construction zone What should you do?

Planners and engineers are responsible for ensuring the work zone is operating properly and drivers are responsible for traveling safely through construction zones.In a work zone, drivers should always pay attention to roadway signs, construction workers on or near the road and the road's surface.

Read more

How can you construct a four wheel steering system?

If you have to ask how to do it, then you are unqualified to do so. 4-wheel steering systems are very complex in their design and operation, and require extensive Engineering to make them operate properly and safely.

Read more

How do you read a gear ratio?

Two Gears Start with a two-gear train. To be able to determine a gear ratio, you must have at least two gears engaged with each other — this is called a "gear train." Count the number of teeth on the drive gear. Count the number of teeth on the driven gear. Divide one teeth count by the ot...

Read more

What is a reduction converter?

Reduction converter can return to the original condition or shape.Such as vide converter .You can convert any DVD and video to iPad and enjoy it while on the go with this powerful DVD Video to iPad Converter.Convert & rip any DVD movies and video for your iPadNo distortion, keep the high-reso...

Read more

How do you change gears on a 21 speed bike?

Read more

How do you stop the construction workers in the twisted thicket?

First, put on the amulet. You have to catch up to the construction cars. You can turn into a goblin to do that. Then, jump on the last car and turn into a troll. Push over the wrecking ball stand so that's it is leaning sideways. Then, turn into the flying creature and fly to the top. You need to...

Read more

How do you shift gears on a bicycle?

Part 2 Shifting Basics Use your left hand to shift the front gears. Use your right hand to shift the rear gears. Gear down to make your pedaling easier but less powerful. Gear up to make your pedaling harder but more powerful. Practice shifting up and down in a flat area. Only shift whil...

Read more

How much do you love Top Gear?

it ace it well wicks!!!!!!!!!!

Read more

How do you find the gear ratio?

They can simply divide the number of teeth on the driven gear by the number of teeth on the driver gear to find the gear ratio.In the Using the Gear Ratio Formula activity students will use this formula to find gear ratios.

Read more

How do you take a gear shift knob off?

Depending on the model, the gear shift knob can be removed by unscrewing it. If it does not unscrew, there will be a screw of some sort that will need to be removed and the gear knob will slide off. Look for a cover or patch on the knob itself and pry that off. Underneath will be the screw holdin...

Read more

How do you shift gears on a 13 speed transmission?

How to Shift a 13 Speed Transmission Shift normally through the first five gears, just as you would in a manual-transmission car or a 10-speed transmission truck.Press the "High/Low Gear" button on your gear shift. Press the "Overdrive" button on your gear shift as you prepare to switch to s...

Read more

How do you ride a bike with gears?

Read more

How do you change gears in a manual car smoothly?

Maintain light pressure on the accelerator pedal as you press the clutch down, change gear and then clutch up gently (or the car will jerk).Using the accelerator will raise your engine speed to match your road speed, ultimately giving you a jerk free gear change.In advanced driving this is called...

Read more

How do you down shift gears in a stick shift?

The gear stick has a diagram of where to move the stick to engage a certain gear. For example, if Gear 1 is in the top left corner, you must move the stick to the fair left, then forwards to engage first gear. Oh, and you have to push down the clutch each time you change gear.

Read more

How do you take of a lift reverse gear knob?

The lift and pull reverse gear is found in cars like the Chevrolet Optra.To shift on to reverse, lift the ring below the gear knob and shift on to 1st gear like you would always do, but with the ring being held.

Read more

How do you switch gears on a dirt bike?

You simply get up to speed where rpm's are getting high then you let of the throttle pull in the clutch and use the shiftier on the bottom of the bike. (All at the same time.)

Read more

How do you use gears on a road bike?

Read more

How do you change gears on a dump truck without grinding the gears?

Gearboxes on trucks are generally not synchromesh. It means there is no mechanism to automatically adjust the speed of the engine and the gearbox to match. Therefore if we would simply change gears like in the modern passenger car equipped with the synchromesh gearbox by depressing the clutch and...

Read more

How do you calculate the gear ratio of a vehicle?

To determine a vehicles speed from the engine speed by multiplying the circumference of the tire by the engine speed and dividing by the combined gear ratio.

Read more

How is FWD final drive constructed?

The drive enters the final drive unit from the propeller shaft (or, in the case of a FWD installation, directly from a spur or bevel gear) by means of a short input shaft on which the pinion gear is mounted.The pinion engages with the much larger crown wheel in order to turn the drive into the li...

Read more

How do you remove gear shift?

Read more

How do you calculate overall gear ratio?

To determine a vehicles speed from the engine speed by multiplying the circumference of the tire by the engine speed and dividing by the combined gear ratio.

Read more

How do you calculate gear ratio speed?

To calculate speed ratio, otherwise known as gear ratio, you divide the number of teeth of the input gear by the number of teeth of the output gear.

Read more

How much reduction in illumination of dirty headlights?

It would depend on how dirty they are. Keeping headlights clean would be in your best interest.

Read more

Do you have to have a heavy duty truck to work in construction?

Although you can use mid-sized trucks for construction work, it would not be as efficient as a slightly larger truck. A full-size truck at least is recommended for people using it for construction work.

Read more

How do you know what gear ratio you have?

Divide one teeth count by the other.Now that you know how many teeth are on each gear, you can find the gear ratio relatively simply.Divide the driven gear teeth by the drive gear teeth.Depending on your assignment, you may write your answer as a decimal, a fraction, or in ratio form (i.e., x : y).

Read more

How much does a semi construction truck weigh?

Depends on the size and duty level of the truck. Typically they are well over 26,000lb fully loaded.

Read more

How the first automobile bodies were constructed?

With assembe

Read more

How can i write a Legal letter asking for principle balance reduction?

Write the letter in normal business format. There is no form letter because everyone's situation is different. Here is a list of do's and don'ts: DO: Briefly outline your hardship, the causes and the expected duration (temporary hardships are not likely to result in balance reductions). Explain w...

Read more

How do you convert foot to hand gear shifting mechanism?

Purchase a vehicle with an automatic transmission.

Read more

What is a scaper in construction?

if you mean a scraper then it is a hand tool that looks like this: http://www.academyfloor.com/images/28539scraper.JPG they are used to take off wallpaper, paint, they are for "tape and joining" drywall/plasterboard as well as many other things

Read more

What is a CVR in construction?

Cost Value Reconciliations (CVR) Cost Value Reconciliations (CVR) are carried out in order to monitor and measure expenditures against budgets on construction projects.They can also be used to inform the management team of the bottom line on a project when negotiating final accounts.

Read more

How do you fix gear linkage in 1999 navigator TRUCK?

You can fix a broken linkage in a 1999 Navigator truck by simply adjusting its Gear Shift.

Read more

How do you change an 2004 alero gear shifter knob?

wow you are stupid, unscrew it and put the new one on dumbarse

Read more

How do you use gear ratio to increase horsepower?

It doesn't work that way. The gear ratio determines what speed the vehicle is running at when in the (torque) powerband.

Read more

How do you change 2 gear to D while moving?

You ease off on the accelerator and move the gear lever.

Read more

How do you know when to change gear?

I have several answers for you, Please chose the most appropriate for you:Down shift when the maximum road speed of the next lower gear is reached.Keep your 2 stroke Detroit power reving, it likes it.These engines have a very specific power and operating RPM band.The heavy duty engines usually wa...

Read more

How do you know when to change gears?

Generally, you should shift gears up when the tachometer is around “3” or 3,000 RPMs; shift down when the tachometer is around “1” or 1,000 RPMs.After some experience with driving a stick shift, you'll be able to figure out when to shift by the way your engine sounds and “feels.” More on that below.

Read more

How do you calculate gear ratio and torque?

Read more

The capital cost reduction on a vehicle lease is?

A: Like a down payment on a house

Read more

How do gears work?

A gear is just a wheel with teeth, sometimes called a cog.To do any work with a gear, you need to have at least two cogs with their teeth fitting into each other.Because the teeth fit together, when you turn one gear, the other one turns too! When two or more gears are connected, it's called a '...

Read more

If you are on gear one are you on a big gear or a small gear?

1st gear is the gear where you can pedal with the least resistance. For a bicycle with external gears the chain should be on a big sprocket at the back and a small chainwheel at the front.

Read more

How do you replace shift gear light 1998 le altima?

how do you replace shift gear light on a 1998 le altima car?

Read more

How do you shift gears in tadem dump truck?

That's going to depend on what transmission you have. In most cases, they shift in a similar fashion to any other Class 8 truck with an unsynchronised transmission. But some have other transmission types.

Read more

How do you take the gear knob off peugeot tepee?

theres a lock nut under the knob, loosen it on shifter and unthread...it hold it tight thats why its there

Read more

How do you tell if your gears are grinding?

As noted in a previous section, with a manual transmission, a common sign of trouble is a grinding sound or feeling when you shift into a new gear.If you fully engage the clutch, shift and then hear a grinding sound, you may have a worn clutch or you may just need to have it adjusted [source: AAM...

Read more

How do you replace a rear gear in a 1994 F-150 XLT?

This can be a very complex proceedure but here are some instructions, i would also buy a Hanes Manual to assist, usually good photos on this, if you are unsure if you can pull this off, labor on this is around $200 or so...Good Luck! == == ---- When working on your differential you will need a wi...

Read more

How do you remove a gear knob in a v reg vauxhall corsa lift reverse?

You can first try to twist it in an anticlockwise direction and then pull but if that doesnt work make a cut around the material that bonds the knob to the lever. You can then pull it out.

Read more

What safety gear do you need for a car?

All cars have a neutral gear and all cars will start in neutral. It is recommended by all vehicle manufactures that the car's transmission be left in either park or neutral and that the emergency brake be set. If the vehicle has an automatic transmission, then PARK is the safest gear, but most ca...

Read more

Do you use the fifth gear of a Geo Metro?

You most certainly do, it is called overdrive. You may be able to achieve high speeds in 4th gear, BUT you can also acheive those speeds in 5th gear but with lower RPMs, thus resulting in an increase in fuel economy

Read more

How do you remove the gear knob from a np auto pajero?

the gear knob has a section at the bottom grab hold and slide it down. this reveals two screws holding the knob on remove the two screws (one on the side and one on the back)and the knob will slide up and off. refitting is reverse of the removal

Read more

How do you repair a 93 Lincoln Town Car that will not go into gear?

First, does the ignition key operate properly? Does the steering wheel move freely? These cars are designed to lock the steering wheel and shift lever when the key is not in the "run" position. (the one before the "start" position) This car may also have a shift lockout that blocks the shift leve...

Read more

How do you change the gear knob on a golf mk2?

To change the gear knob on a golf MK2 too need the tool box that will help you open and get access to the area that has the gear knob. You can then change the gear knob from this point.

Read more

How many quarts of gear oil do you need to fill up a Dodge Intrepid 2001?

It doesn't use gear oil. The differential is part of the trans-axle and it is all lubricated by the transmission fluid.

Read more

How do you find the gear ratio on a Dodge Ram?

Carefully count the teeth on both gears and divide the pinion number into the ring number (of teeth) and you will get a number like 3.55.That number you get will be the gear ratio.Another idea is to look at the front differential for a tag.The front would be the same ratio.

Read more

How do gears help us?

Gears are used for transmitting power from one part of a machine to another.Photo: In an egg whisk, gears help to make light work of mixing in two different ways—by increasing speed and changing direction.When you crank the handle, you turn the large outer gear wheel at moderate speed.

Read more

Where do you put gear oil in a manual transmission?

Most standard transmissions have a fill plug and a drain plug. The fill plug should be found midway on one side of the trans. Check your drivers manual as to what type of fluid goes in there. Many do not use gear oil anymore.

Read more

What gear do you push start a car in?

The most common way to push start a vehicle is to put the manual transmission in second gear typically, switching the ignition to on/run, depressing the clutch, and pushing the vehicle until it is at a speed of 5 to 10 mph (8 to 16 km/h) or more, then quickly releasing the clutch to make the engi...

Read more

What is legal in the construction of a travel trailer?

The law is different from state to state. I would advise checking your local DMV for what is and is not legal in your state.

Read more

Where can a person purchase Little Tikes construction trucks?

Little Tikes construction trucks are popular children's toys, and can be purchased online, directly through the Little Tikes website. They can also be purchased from retailers such as Costco.

Read more

How do you change gear oil in a 1998 dodge 1500 truck?

You take off the bolt at rear of oil pan and drain it. Then replace bolt and change oil filter on side of engine, then fill engine with required amount of new oil.

Read more

How do you top up gear box oil on a mazdamx3?

yo u but gas in it full up then you lock it up then but your leg in side of it PS .... what i dummmm thing is that

Read more

How do you remove the gear knob on a 1996 VW polo?

The knob just screws off.

Read more

When do you switch gears in a cvt transmission?

you as the driver do not change gears they are constantly changing themselves depending on the speed you are driving hence the name Constantly Variable Transmission. hope this helps. more info just ask

Read more

How much does a heavy construction vehicle operation with a CDL class A earn?

As much as the company sees fit to pay them. There isn't a set rate for this, and the pay rate will be determined by the area of hire, the driver's experience, and other factors.

Read more

How can you get a job on top gear?

I would suggest writing to them and seeing if they will write back telling you if they have any jobs open.

Read more

How do you change a starter drive gear in a1984 F-150 300 6-cylinder?

Hello, If you are talking about the gear on the fly wheel, 1. remove the fly wheel from the back of the motor. 2. Remove any grease and oil. 3. put it into the kitchen oven at 400 deg. for about 20-30 min. 4. Then use pliers to remove or relocate the gear. The gear is made of softer metal than th...

Read more

How do you remove a starter gear assembly on 750 kawasaki wave runner sts?

You must first take apart the panels so that you have access to the engine (make sure it is off!). Locate the starter and dismantle this and you will take apart the gear assembly along the way.

Read more

How do you reset the gears on a 03 predator 500?

First of all this is not a job for just one person. You need to loosen the bolts that hold the case together. Then, move lever to put in neutral position. You and a friend put tension on both ends of the shaft to make sure it is still within tolerance. If it is, use a washer and a cotter pin to t...

Read more

How do you unlock the gear shift on a Nissan Altima?

Read more

How much does it cost to rent construction equipment?

Renting an excavator averages $571 a day, $1,233 a week, and $3,433 for four weeks.According to Warehouse IQ, a new 6,000 pound forklift costs between $11,000 and $13,000.Big Rentz rents out forklifts for $196 a day, $547 a week, and $1,640 for four weeks.Need a skidloader?

Read more

What do you use 3rd gear for?

The way most automatic transmissions work is when you select a numbered gear, you are limiting the transmission to going no higher than that gear.So, 3, or third, is just preventing your four (or five) speed car from going into fourth (or overdrive (which is what D would allow)).

Read more

Do you release throttle when changing gears?

When you press clutch it basically disconnects the engine from the gear box.Engine is not loaded at this time and if you don't let go off the accelerator engine rpm will increase and gear shift will become clunky and would lead to wear of your clutch plates and gearbox collars.

Read more

Do you shift gears while pedaling?

Completely stopping pedaling will not let you shift gears at all.You do have to reduce the tension in the top of the chain to shift front, so pedal, but with small force.It is normal to reduce pedaling force when shifting.

Read more

How do you tell what gear you have with out tacking off cover?

Rear differential.: Jack up car, place in neutral, rotate both tires one revolution forward while counting the revolutions the drive shaft makes.With care full counting and measurement of the partial revolution at the end you will end up with a good idea what the ratio is.

Read more

Do you accelerate when changing gear?

When you're about to change gear, release some pressure on the throttle pedal first, to reduce the rate of acceleration.If you're having trouble you can 'short-shift' by changing to second gear early at lower rpm to avoid kissing the dashboard.

Read more

How many gears do formula cars have?

6 or usually 7 forward gears and 1 reverse, though this is rarely used.

Read more

How does a 6-gear differ from 4-gear car?

the difference between a 6 gear and a 4 gear car is 2 gearsone has 6 gears and one has 4 gears

Read more

How many gears do semi-trucks have?

It depends on the weight the truck is designed to haul."Most" trucks have 9 or 10 speed transmissions. That is the common denominator in many trucks driving down the roadways today. But, there are 13, 15, 18 and even 21 speed trucks driving down the road as well.Heavy-haul trucks such as the ones...

Read more

How do f1 cars shift gears?

In an f1 car, the clutch is only used to start moving(neutral to 1st gear) and putting the car in reverse.Once the car is in 1st gear, the driver changes gears with a paddle(paddle-shift).The gearboxes are hydraulically actuated, and the driver can leave his foot on the accelerator.

Read more

What do gears do on a car?

The gears on a car provide the power to drive the wheels.

Read more

If you are driving a stick shift car how do you know when to change into 5th gear?

Normally you have to listen to the RPM rate to know when to change into ANY gear on a stick-shift/manual transmission car. Changing between fourth and fifth gear isn't any different from changing between, say, 3rd and 4th. I wouldn't bother keeping too much of an eye on the RPM meter, because if ...

Read more

How does a gear work?

It helps Grace and Brandon fall more in love. We all know she likes him I mean come on make the gears turn and them go out already!! Brandon, dude, grow some balls and ask her out.

Read more

What do you do when your car doesn't change gear?

Take it to get a full diagnostic...to a professional

Read more

How long did it take to construct a Model T Ford in 1914?

Henry Ford Invents the Model T Engine The engine worked for 30 seconds, long enough to confirm for Ford that he was on the right track.Three years later, Ford developed the Quadcycle, a self-propelled vehicle.

Read more

How do you fix a gear selector that will not shift out of park in a 1997 Hyundai accent?

Check to see if the stop lights are working. Shift interlock is the same circuit. If they do not work check fuses and stop light switch.Try turning the key to 1st position (unlock) shift to neutral to start vehicle and then shift to Drive

Read more

What parts are used in the construction of a car?

Engine parts such as a clutch, pistons, and spark plugs are used in the construction of a car. Non-engine parts used include the windshield, brakes, and tires.

Read more

What gear do you have to be in when you ride a dirt bike?

if u have a 4 cluch and u want to o fast like over jumps or something u should be in 4th gear and if u only have a 2 clch then i guess 2nd gear

Read more

Do you have to pay taxes on your company furnished pickup that is used for construction projects?

no your employer is responsible for taxes , license, and any needed permits.

Read more

How do you know when to change gears in a stick shift with and without a tachometer?

Listen to the engine. if it sounds like its working too hard, or if the accelerator pedal is really sensitive, its time to shift. If its bogging down, its time to downshift.

Read more

What makes a car do a kangaroo and you have to change down a gear?

that means you are letting go of the clutch too fast and possibly grinding gears.Some of us may not know what a car is doing when it's doing a kangaroo. Please describe.

Read more

How do you use D 2 and L of auto gear system?

press in the button and move the selector to those positions. the button dose not have to be pressed to move back into drive on most cars. the car dose not have to be stopped (however sifting int L at 30+ mph can damage the transmission or engine but 2 or 3 should be fine at any speed.) these are...

Read more

How do you check gear ratio by spinning tire and counting pinion rotations?

Jack up the vehicle on one side. mark the drive shaft with a piece of chalk or tape a piece of string to the drive shaft, at a specific location, say at the point closest to the ground. Also mark the tire as well so that you can determine exactly how many revolutions you turn the wheel. If you do...

Read more

How do you fix an 89 dodge ramcharger from leaking gear oil from rear?

drain the gearbox, open it up, change your gaskets, put it back together, fill it up, and drive away

Read more

If your car gets stuck in one gear how do you stop the car?

Assuming that the car is a standard, you should first fully push in the clutch and then slowly press down the pedal, or pull up the handle, of your emergency brake (depending on what type you have in your vehicle) until you slow down to a complete stop.

Read more

How do you unlock the Top Gear test track on gt5?

You have to beat the first Top Gear challenge in special events - the one where you race the bus. But the thing is, you need to get gold. Getting a bronze or silver won't unlock the course.

Read more

How do you replace steering gear box on 2004 hummer h2?

In reality, i totally do not

Read more

How do you make my international semi truck run 2100 rpm in every gear?

I'm guessing you're trying to use a certain device to bypass the speed governor, only to find out that you're still governed by the rev limiter? I don't know the year or model of your truck, but it's presumably recent enough that it has an engine with electronic controls, meaning that the rev lim...

Read more