How do I tell what gear ratio my Vin is?

How to Find Out the Gear Ratio With the VIN Number
  1. Find the VIN of your vehicle. It can be found on the sticker on the inside of the driver's side door or on a stamped metal plate embedded in the dashboard above the steering wheel.
  2. Identify the VDS section, the fourth through eighth digits of the VIN.
Previous questionDo you really have to wait 6 months to get your license?
Next questionHow do you know what gear ratio you have?

Related question

What gear ratio do I have by Vin?

How to Find Out the Gear Ratio With the VIN Number Find the VIN of your vehicle. It can be found on the sticker on the inside of the driver's side door or on a stamped metal plate embedded in the dashboard above the steering wheel. Identify the VDS section, the fourth through eighth digits o...

Read more

How do I know my rear gear ratio?

Turn the wheel TWO revolutions and count the number of driveshaft turns.The number of driveshaft rotations will help you determine your rear axle ratio.For example, if it turned 3 and a half times, it's a 3.50:1 ratio.If it turned 4 and a quarter times, it's a 4.25:1 ratio.

Read more

How do I know what gear ratio My rear end is?

Turn the wheel TWO revolutions and count the number of driveshaft turns.The number of driveshaft rotations will help you determine your rear axle ratio.For example, if it turned 3 and a half times, it's a 3.50:1 ratio.If it turned 4 and a quarter times, it's a 4.25:1 ratio.

Read more

How do I find out what gear ratio My car has?

Divide one teeth count by the other.Now that you know how many teeth are on each gear, you can find the gear ratio relatively simply.Divide the driven gear teeth by the drive gear teeth.Depending on your assignment, you may write your answer as a decimal, a fraction, or in ratio form (i.e., x : y).

Read more

How can you tell the rear end gear ratio?

Simply by jacking both rear wheels off the ground,put it in neutral,handbrake off, and chock the front wheels, and then turn the rear wheel 10 revolutions, and count the number of revolutions the tailshaft makes. For example, if it makes almost 38 revolutions, the diff ratio is 3.78:1. Alternativ...

Read more

How do I find my axle ratio?

In order to calculate axle ratio, you would count the number of teeth on the ring gear as well as the number of teeth on the pinion.Divide the number of teeth on the ring gear by the number of teeth on the pinion in order to determine the axle ratio of a truck.

Read more

What can my VIN number tell me?

What Does My Vehicle Vin Number Tell Me? Every car's Vehicle Identification Number (VIN) is unique.The VIN is a 17-character combination of letters and numbers that represent information about the vehicle, including make, year and manufacturer.

Read more

How can I tell what options my car has by Vin?

To use a VIN number to check a car's options, go the manufacturer's website and find the VIN decoder section.Then, use the last 7 digits of your VIN to learn about specific options like trim color, seat covering material, and power seats and windows.

Read more

How do you find the gear ratio?

They can simply divide the number of teeth on the driven gear by the number of teeth on the driver gear to find the gear ratio.In the Using the Gear Ratio Formula activity students will use this formula to find gear ratios.

Read more

How do I tell what year my 700r4 is?

Read more

How do I tell what year my Yamaha ATV is?

The VIN is mounted on a plate on the frame at the bottom of the ATV. ATV VINs are standardized for all manufacturers. Look at the first three digits of the VIN. Read the fourth through eighth digits. Look at the ninth digit. Read the tenth digit.

Read more

How do I tell what year my Chevy truck is?

The year when the truck was manufactured is usually mentioned in the car manual.Without the car manual, the VIN number is the easiest way to determine the model year of a Chevy truck.Any Chevy truck manufactured after 1972 has a VIN number.

Read more

How is gear ratio calculated?

Divide the number of teeth on each "driven" gear by the number of teeth on the "drive" gear for each interlocking set of gears to calculate the intermediate gear ratios.In our example, the intermediate gear ratios are 20/7 = 2.9 and 30/20 = 1.5.

Read more

How do you read a gear ratio?

Two Gears Start with a two-gear train. To be able to determine a gear ratio, you must have at least two gears engaged with each other — this is called a "gear train." Count the number of teeth on the drive gear. Count the number of teeth on the driven gear. Divide one teeth count by the ot...

Read more

How do you calculate overall gear ratio?

To determine a vehicles speed from the engine speed by multiplying the circumference of the tire by the engine speed and dividing by the combined gear ratio.

Read more

How do you calculate gear ratio speed?

To calculate speed ratio, otherwise known as gear ratio, you divide the number of teeth of the input gear by the number of teeth of the output gear.

Read more

What gear ratio is gu6?

GM RPO Codes – Factory Identification Labels and Interpretation RPO CodeDescriptionRatioGU3Axle Rear2.93GU4Axle Rear3.08GU5Axle Rear3.23GU6Axle Rear3.42115 more rows

Read more

How do I lower my engine compression ratio?

To decrease the compression ratio "remove material" from inside of the Cylinder head or piston top.This increases both the volumes by equal amount and hence the ratio gets decreased.

Read more

What is rear gear ratio?

Usually a whole number and decimal fraction, the drive-axle ratio is a comparison of the number of gear teeth on the ring gear of the rear axle and the pinion gear on the driveshaft.For example, a 4.11:1 ratio means there are 4.11 teeth on the axle's ring gear for each tooth on the driveshaft's p...

Read more

How do I know my rear axle ratio?

Turn the wheel TWO revolutions and count the number of driveshaft turns.The number of driveshaft rotations will help you determine your rear axle ratio.For example, if it turned 3 and a half times, it's a 3.50:1 ratio.If it turned 4 and a quarter times, it's a 4.25:1 ratio.

Read more

How do you know what gear ratio you have?

Divide one teeth count by the other.Now that you know how many teeth are on each gear, you can find the gear ratio relatively simply.Divide the driven gear teeth by the drive gear teeth.Depending on your assignment, you may write your answer as a decimal, a fraction, or in ratio form (i.e., x : y).

Read more

How do I change the compression ratio on my engine?

To decrease the compression ratio "remove material" from inside of the Cylinder head or piston top. This increases both the volumes by equal amount and hence the ratio gets decreased. Changing the piston head design.Changing the stroke length of the cylinder.Changing cylinder diameter.Chang...

Read more

How do I find the axle ratio on my f150?

How to Find Out the Axle Ratio on a Ford Pickup Open the front door on the driver's side.Locate the Truck Safety Compliance Certification Label on the door pillar near the door latch.Locate the two-digit code in the box labeled "AXLE," which is just below the bar code.Match the code on the la...

Read more

Can my VIN number tell me?

Vehicle identification numbers can reveal many things about automobiles, including their airbag type, country of origin, engine size, model year, vehicle type, trim level, and plant name.The VIN (sometimes known, redundantly, as the "VIN number") is the key to safety.

Read more

What does changing your gear ratio do?

Having the correct gear ratio for your truck and its tires will give you the best fuel economy, improve acceleration, throttle response, and your ability to maintain highway speeds.When changing gears for taller tires, you are heading to a numerically higher gear ratio.

Read more

How do different Differential gear ratios affect top speed?

Lower differential gear ratios, such as a 4.11 for example will help you get up to speed sooner in all gears, but your top speed will be limited vs a differential gear ratio of 3.08. In other words more torque less speed, less torque more speed. 4.11 for example means that your drive shaft from t...

Read more

What gear ratio is best for towing?

The most popular rear end ratio in trucks today is the 3:55, which sort of averages towing power and fuel economy.This is a good ratio for the occasional towing or hauling individual.For a person who tows more often, and heavier loads, the 3:73 or 4:10 may be more appropriate.

Read more

How do I get a new VIN for my trailer?

Copy of the title or registration to show ownership.Duplicate VIN tag document filled out to completion, along with being notarized.Purchase Order Number (PO#) for the $60 invoice if they (the Dealer or Business) need a specific one.Call with a Credit Card number to pay the $60 invoice to get the...

Read more

How do I find the VIN on my classic car?

How to Check a Classic Car's Vin Number Look at the dashboard near the windshield. Using a flashlight, look inside the driver's side wheel arch.Using a flashlight, look under the steering column, which is located inside the vehicle under the steering wheel.Look for the VIN on the firewall of...

Read more

How do I find my car's VIN number?

It can be seen from the outside of the car and is on the windshield of the driver's side where the dashboard and the window meet. If it's not there, it can be found on the inside of the driver's side door.

Read more

Which gear ratio is faster?

The lower the number, the faster the car will go with the same number of engine revolutions.The higher the number the better the car will accelerate, but at the expense of high speed cruising.Now for the confusing part of the story.A high numerical gear ratio is called a low gear or low rear end,...

Read more

How do I find the VIN of my old car?

Read more

How do you use gear ratio to increase horsepower?

It doesn't work that way. The gear ratio determines what speed the vehicle is running at when in the (torque) powerband.

Read more

How do you calculate gear ratio and torque?

Read more

How do you calculate the gear ratio of a vehicle?

To determine a vehicles speed from the engine speed by multiplying the circumference of the tire by the engine speed and dividing by the combined gear ratio.

Read more

How do I tell the age of my tires?

The date of manufacture is the last four digits of the DOT code.The first two digits are the week of manufacture, and the last two digits are the year.For example, if the last four digits of the DOT code are 0203, that means that the tire was manufactured during the second week of the year 2003.

Read more

Is 3.73 a good gear ratio?

So, a truck with optional 3.73 gears will tow a heavier trailer than one with 3.55 or 3.21.But it will also use more fuel in all situations because the engine's rpm will be higher.Four-wheel-drive trucks will have a ratio in the front axle's differential that closely matches that of the rear axle.

Read more

Is a bigger gear ratio better?

The lower the number, the faster the car will go with the same number of engine revolutions.The higher the number the better the car will accelerate, but at the expense of high speed cruising.Now for the confusing part of the story.A high numerical gear ratio is called a low gear or low rear end,...

Read more

Which RPO code is for gear ratio?

GM RPO Codes – Factory Identification Labels and Interpretation RPO CodeDescriptionRatioGU5Axle Rear3.23GU6Axle Rear3.42GU7Axle Rear2.77GU8Axle Rear3.90115 more rows

Read more

How do I tell if my speakers are blown?

To tell if the speaker is blown or not without taking it apart is really easy.All you have to do is take a 9 volt battery and touch it to the wires.If it makes scratching noises its good.If it makes no sound at all its blown.

Read more

How does gear ratio use function?

gear ratio can speed up a device or slow it down. The gears that make up the gear ratio can be used to go from small to bigger thru a series of gears and slow the drive down , say 30 to 1. Or start off with large gears going smaller and speed up the drive say 1 to 30.

Read more

What is the best gear ratio for towing?

So, a truck with optional 3.73 gears will tow a heavier trailer than one with 3.55 or 3.21.But it will also use more fuel in all situations because the engine's rpm will be higher.

Read more

How do you tell what year your camper is by the VIN?

The tenth digit from left is the year code.- For instance, T is 1996, U is 1997, W is 1998 and so on.

Read more

How do I know my ring gear size?

The ring gear diameter is measured across the face of the gear.To obtain the ring gear diameter, simply place a tape measurer across the gear.This can be tricky if the ring gear & carrier are still in the housing.In some cases, a differential can be identified by the number of cover bolts is ...

Read more

How do you tell what year a car is by the Vin?

The 10th character in the 17-character VIN represents the vehicle model-year. This standard applies to vehicles built in or after 1981. Note: VINs do not include the letters I (i), O (o), Q (q), U (u) or Z (z), or the number 0, so that they will not be confused with similar looking numbers/l...

Read more

How can I tell where my car is leaking?

Take notice of the color that is leaking from your car, so that you can figure out which area of your car may be leaking. Red. Red fluid leaking from your car is generally an indication that your transmission or power steering system is leaking. Orange. Yellow. Green. Blue. Clear. Dark ...

Read more

How can I tell if my radiator is clogged?

5 Signs That Tell You Your Radiator Is Clogged Leaking coolant. When coolant is not able to circulate in the radiator, it can leak out onto other areas of the vehicle. Discolored and thicker coolant. You know your coolant's original color, don't you? Damaged water pump. Excessively high ga...

Read more

How can I tell which app is draining my battery?

How to see which apps are draining your Android device's battery Step 1: Open the main settings area of your phone by pressing the Menu button and then choosing Settings.Step 2: Scroll down in this menu to "About phone" and press it.Step 3: On the next menu, choose "Battery use."Step 4: Look ...

Read more

How can I tell if my EGR valve is bad?

Top Five Signs of a Bad EGR Valve Poor engine performance. A bad EGR valve is likely to have issues with the engine's performance. Look out for the engine warning light. The “check engine” indicator will light up on the dashboard when your EGR valve fails. Fuel odor. Failed emission test. ...

Read more

How can I tell if my engine is blown?

Blown Engine Symptoms & How to Tell if Your Engine is Blown Blue Exhaust Smoke. Blue smoke billowing from your tailpipe can be a sign you've had your car engine blow up. White Exhaust. Rattling or Knocking in the Engine. Coolant in the Engine Oil. Engine Won't Start. Blown Piston. H...

Read more

How can I tell if my car is burning oil?

How to Tell If a Car Is Burning Oil Check the oil. Open your car's hood and pull out the oil dipstick. Check the exhaust. Blue smoke coming from a car's exhaust pipe while it is running is a sign of oil burning. Monitor the engine to see if it is misfiring or running rough. An engine that i...

Read more

How can I tell if my shift solenoid is bad?

Signs You've Got a Bad Shift Solenoid The check engine light comes on: The TCM continuously monitors shift solenoid operation. Erratic shifting or shift slippage: The shift solenoids regulate the flow of hydraulic fluid for shifting. Transmission won't shift gears: A faulty shift solenoid c...

Read more

How can I tell if my suspension is bad?

Symptoms of bad shocks or struts include: Badly cupped tires and/or noticeable tire shaking, wheel shimmy or vibration after hitting a bump.Suspension bottoming on rough roads or when backing out of a driveway.A bouncy ride.Body sway or rocking when cornering or driving in strong crosswinds.

Read more

How can I tell if my battery charger is working?

How to Test a Battery Charger Plug in your charger to an electrical outlet. Turn on your voltmeter unit. Take a battery or battery pack that's compatible to your battery charger. Check the readout on the voltmeter and see where the pointer is indicating to.

Read more

How can I tell if my o2 sensor is bad?

Here are some other symptoms of a failing O2 sensor: Poor fuel economy.Loss of power.Black smoke from tailpipe.Failed emissions test.Rough idle.Hesitation or stalling.

Read more

What is my compression ratio?

By definition, the compression ratio is the total swept volume of the cylinder with the piston at bottom dead center (BDC), divided by the total compressed volume with the piston at top dead center (TDC).

Read more

Is a higher gear ratio faster?

Gear ratios can be boiled down to a single statement: Higher ratios (with a lower numerical value) give better torque/acceleration and lower ratios allow for higher top speeds and better fuel economy.Higher ratios mean the engine has to run faster to achieve a given speed.

Read more

Is a 4.10 gear ratio good?

It may help if you read the “Gearing Lingo” in the right column first.When you hear people refer to numbers like 3.08, 3.73, or 4.10, they're talking about the ratio of the ring-and-pinion gears in the rear axle—hence, the numbers are more accurately 3.08:1, 3.73:1, or 4.10:1.

Read more

How can I tell if my master cylinder is bad?

Symptoms of a bad or failing brake master cylinder Abnormal brake pedal behavior. One of the first symptoms commonly associated with a bad or failing brake master cylinder is abnormal brake pedal behavior. Contaminated brake fluid. Another symptom of a bad brake master cylinder is contaminat...

Read more

How can I tell if my water pump is failing?

Here are 5 common symptoms of a bad water pump: Coolant Leak at the Front-Center of your Car. Rust, Deposit Buildup, and Corrosion of the Water Pump. Water Pump Pulley is Loose and Making Whining Sounds. Engine is Overheating. Steam Coming from your Radiator.

Read more

How can I tell if my torque converter is bad?

Signs of a Bad Torque Converter The first, and for a lot of people, most obvious sign of a bad torque converter is when the gears in the car's transmission begin to slip.When your transmission slips, it would feel like you're driving over ice or up a hill with a heavy package in the trunk.

Read more

How can I tell if my oil pump is bad?

A look at the three main signs that you need to fix or change your oil pump: low oil pressure, high engine temperature, and noise. Low oil pressure. A bad oil pump will lose the ability to properly pump oil through your system. Increased engine operating temperature. Noise.

Read more

How do I find my license plate number with my VIN?

Find the vehicle's VIN (vehicle identification number).This is a unique code consisting of 17 characters.The VIN for almost all vehicles can be found by looking at the bottom corner of the windshield, on the driver's side, from outside the vehicle.It will be engraved on a small metal plate.

Read more

What does a 4.10 gear ratio mean?

When you hear people refer to numbers like 3.08, 3.73, or 4.10, they're talking about the ratio of the ring-and-pinion gears in the rear axle—hence, the numbers are more accurately 3.08:1, 3.73:1, or 4.10:1.That also means that for every one turn of the ring gear, the pinion will turn 4.11 times.

Read more

How can I tell if my brake booster is bad?

Here are three common signs that your brake booster may have failed: You need more effort to apply the brakes (stiff brake pedal).The brake pedal doesn't return to its original position by itself.The engine rpm goes down when you depress the brake pedal at idle.

Read more

How can I tell if my catalytic converter is bad?

Read more

How can I tell if my ignition coil is bad?

The severity of the symptoms vary according to which of the ignition coils are failing. Backfiring. If your vehicle is backfiring, this can indicate early symptoms of an ignition coil failure. Starting Problems. Check your high tension leads (HT Leads). Fuel Economy. Engine Misfiring. Veh...

Read more

How can I tell if my catalytic converter is clogged?

Symptoms of a Bad or Failing Catalytic Converter Reduced Engine Performance. One of the first symptoms commonly associated with a bad or failing catalytic converter is a reduction in engine performance. Rattling Noise. Sulfur Smell from Exhaust. Check Engine Light Comes On. Failed Emissio...

Read more

What is the difference between 3.73 and 4.10 gear ratio?

What is the difference between a 3.73 gear ratio and 4.10? The ratio is the number of teeth on the driven gear (ring) divided by the number of teeth on the drive gear (pinion).So, if the ring gear has 37 teeth and the pinion has 9 teeth, the ratio is 4.11:1.

Read more

What is the calculation of the gear ratio?

Calculating the gear ratio for a car entails a lot of information. How high do you want the car engine to rev(turn-RPM) at 60 MPH? How much horsepower is the engine making and how much can be developed at the rear wheels?(I am assuming you're are referring to a rear wheel drive vehicle). How Much...

Read more

How can you tell where a car is by Vin?

One method is using the vehicle identification number, or VIN.It's not commonly known, but you can easily tell a car's production location by simply looking at the first letter or number of a VIN.If the first character is 1, 4 or 5, then the car was built in the United States.

Read more

What is the gear ratio on a 1996 GMC 1500?

You would need to look at the RPO codes on the sticker in the glove compartment. If it's a 4x4, you most likely have either 3.73 (GT4) or 4.10 (GT5) ratios. 3.08 (GU4), 3.42 (GU6), and 3.55 (GV0) are also seen sometimes. The best way to know for sure is to call the service department of a GMC dea...

Read more

What is the gear ratio of a Turbo 350?

Typical Transmission Ratios Transmission1st2ndPowerglide1.821.00Turbo 3502.521.52Turbo 4002.481.48700R43.061.639 more rows

Read more

How do I find out what options my car has by Vin?

To use a VIN number to check a car's options, go the manufacturer's website and find the VIN decoder section.Then, use the last 7 digits of your VIN to learn about specific options like trim color, seat covering material, and power seats and windows.

Read more

How do I tell which side my fuel door is on?

In most cars it is as simple as looking at your gas indicator on the dashboard. Usually on the fuel gauge is a small picture of a gas pump. On one side or the other of the picture there will be a small triangle arrow that points to the side that the gas cap is located on.

Read more

How does gear ratio relate to speed and torque?

in simplest terms, gear ratio is all about leveragethe same concept that makes a larger lever able to apply more force while moving a longer distance applies to gears. instead of comparing the length of the lever, you compare the size of the gears or number of teeth (which is the same as a measur...

Read more

How do you tell if your gears are grinding?

As noted in a previous section, with a manual transmission, a common sign of trouble is a grinding sound or feeling when you shift into a new gear.If you fully engage the clutch, shift and then hear a grinding sound, you may have a worn clutch or you may just need to have it adjusted [source: AAM...

Read more

How do I tell which alt is on my 2004 Chevy 1500 105 amp or 145?

The 145 Amp has more/larger ventilation openings.

Read more

How do i tell if my 2002 Saturn Vue is an early or late production?

There should be a production date (month and year) along with other info on a sticker in the drivers door jam area.

Read more

Does the vin tell what state the car is from?

Yes, with the VIN you can find the history of the car.

Read more

What does a VIN number tell you?

Vehicle identification numbers can reveal many things about automobiles, including their airbag type, country of origin, engine size, model year, vehicle type, trim level, and plant name.The VIN (sometimes known, redundantly, as the "VIN number") is the key to safety.

Read more

How can I find my stolen car by VIN number?

How to Check If a VIN Number Is From the Stolen Property List Get the vehicle identification number for the vehicle you want to check the history of. The VIN number is the 17-digit number that is used to identify each unique vehicle. Go to the National Insurance Crime Bureau website and ente...

Read more

How do i get my four wheeler to go into gear it is stuck into neutral?

First you should look into the 'owners manual' under operation the 4 wheeler. If you don't have the owners manual go on line. For better clarification check with your car's brand dealership: ask for service, most of the time they are quite helpful. J.

Read more

How can I tell the manufacture date of a VIN number?

How to Tell the Production Date by the VIN Locate the VIN on your vehicle. It is usually on either the left side of your dash or the driver's side door panel sticker.Find the tenth digit. This is the beginning of the Vehicle Identifier Section (VIS) of the VIN, and represents the model year. ...

Read more

How can I find my old car without the vin?

You can find a car without the VIN. Use the license plate number. The motor vehicles department in your state uses the license plate number as well as the VIN to identify all vehicles. Search for the car using your driver's license number. Contact the insurance company that insured the car ...

Read more

Does a VIN tell what the engine size is?

yes. the vin tells where the car was made the order it was put together in the year the engine size the make and model and what type of vehicle it is (coupe/sedan/ convertable/ etc) and its country of origin

Read more

How can I find my VIN number online?

On the Vehicle The VIN can often be found on the lower-left corner of the dashboard, in front of the steering wheel.You can read the number by looking through the windshield.The VIN may also appear in a number of other locations: Front of the engine block.

Read more

What will the VIN number tell me?

On vehicles manufactured before 1981, VIN numbers are between 11 and 17 characters in length, and they are also often found on the driver's side of the dashboard.You can also locate a VIN number by looking at the vehicle title, registration card, and insurance documents.

Read more

How do I tell what size engine I have?

If you want to know the size of your vehicle's engine, there are several methods available to get the information. Open the hood of your vehicle and prop it up. Check your vehicle's manual. Open your web browser and go to nadaguides.com. Look for the VIN number of your vehicle.

Read more

Is gear ratio the same as mechanical advantage?

The mechanical advantage is the ratio of the number of teeth on the output gear to the number of teeth on the input gear.This ratio is the mechanical advantage of the whole gear system.Compound machines typically must overcome more friction than simple machines because they tend to have many movi...

Read more

What does VIN number tell you?

Vehicle identification numbers can reveal many things about automobiles, including their airbag type, country of origin, engine size, model year, vehicle type, trim level, and plant name.The VIN (sometimes known, redundantly, as the "VIN number") is the key to safety.It's also stamped on the engi...

Read more

How does gear ratio affect speed and torque?

The gear ratio expresses the ratio of the output torque to the input torque.Thus, we can multiply the torque supplied at the motor shaft (the input) by the gear ratio to find the torque at the wheel axle (the output).Transmitting power through a series of gears can also affect rotational speed.

Read more

How do you check gear ratio by spinning tire and counting pinion rotations?

Jack up the vehicle on one side. mark the drive shaft with a piece of chalk or tape a piece of string to the drive shaft, at a specific location, say at the point closest to the ground. Also mark the tire as well so that you can determine exactly how many revolutions you turn the wheel. If you do...

Read more

How do you find the gear ratio on a Dodge Ram?

Carefully count the teeth on both gears and divide the pinion number into the ring number (of teeth) and you will get a number like 3.55.That number you get will be the gear ratio.Another idea is to look at the front differential for a tag.The front would be the same ratio.

Read more

What is my VIN number?

The VIN is your Vehicle Identification Number.All vehicles are assigned one of these unique numbers.It's usually a 17 character ID commonly found on the driver's side interior dash, door jamb, as well as on title records.

Read more

How do I trace a VIN number?

Read more

How do I find the VIN number on my commercial truck?

How to Check a Commercial Truck VIN Number Open the truck's cab door. Look along the side panel of the cab door and record the 17 characters that will be displayed in both letters and numbers along the side of the door.Go online to a reputable Vehicle Identification Number (VIN) verification...

Read more

How do i get warranty plate information from my VIN number for a 1968 mustang?

The warranty plate contained information that described the car both in features like which engine and transmission it had, but also the DSO number which was what district the car was original sold in. If you don't have a Warranty plate anymore, you could reverse engineer what it should have been...

Read more

Is a 3.42 gear ratio good for towing?

For instance, the 3.42:1 ratio included on many Canyon V-6 and Sierra 1500 models offers a good all-around blend.That said, if you regularly tow heavy trailers or prefer a peppier feel in acceleration, consider a truck equipped with a higher numeric axle ratio.

Read more

Why do my revs go up when I change gear?

The revs of the engine are controlled by your speed and the gear ratios, so when you accelerate, if the clutch slips, the engine loses it's grip on the drivetrain and the flywheel spins more easily, hence the revs increase.So really the only thing that can make the engine work harder is the throt...

Read more