Under the dash directly above the accelerator pedal
i have a 95 Prizm and i just bolted the plate to the bumper. it does the same the as a bracket. but it cost no money.
.039-.043 and you can also look under the hood and read were it says tune-up specifications and it should sometimes say plug gap ...
Back into parking spaces.How with no reverse??????? Try again
water mixed in oil, check dipstick, looks milky in color. quick overheating. visible leaks around head gasket.
No. you have to have them both on the car or truck.
The wire should rest at 12V+ or zero but when the parking brake is on the wire goes 12V- .
No, it is not illegal. New Mexico does not require a front state license plate.
The ALB light comes on because of a malfunction in the Anti-Lock brake system, simply this means that you will have no ALB, but normal braking will continue.
When it is cold and on a level pavement One week after changing it, which should be every 3000 miles.
California requires a license plate on the front and back of the car. You have to remove your plates from Germany.
The difference in what the car sells for and the balance on the loan, plus repo, and administrative costs. Very, very, bad idea to allow this to happen. Sit down with the lender and work something out. They do not want to repo your car. Voluntary repossession hurts your credit just as much as the...
If you get a citation from a traffic cop, the ticket is yours. If the intersection has a camera that catches the vehicle in violation, the owner will get the ticket. It would probably be the person that you borrowed the car from. Because if you ran the red light, the camera or police would always...
== == Change the oil Assuming your oil is in good condition, the problem ofclicking noise is a very vauge description,, but look into these possible issues..a vaccum leak, bad fuel injector system, rack and pinion gear clamps,maybe just a worn drive belt,or a sticking lifter or rocker arm
It depends what kind of sensor and how it is wired. Usually the "sensor ground" refers to the ground source at the sensor's plug. Usually that leads back to the ECM. Sometimes it's the threads where the sensor screws into the vehicle. If a wire brakes or corrosion builds up between parts the re...
Faulty fuel pump, fuel pump relay or fuse, fuel filter, connectors or possibly even something else... who knows what without first checking?
Hey Kim==This is normal with some cars and I wouldn't worry about it.Goodluck, Joecheck that your transmission fluid is full, not over full. Or just change it. Sometimes it gets contaminated
Try cleaning the MAF (Mass Air Flow) sensor. Use MAF sensor cleaner only and follow directions on the can.
check to make you have a good battery, if it is good, it probably needs a new starter.
Parking/tailight fuseActually the shift indicator is powered by ign 0 in side fuse panel and the tach and speedo are powered by ign 1 fuse!
heater control cable not adjusted properly?
If parking brake is operated through service brake--then piston is threaded into caliper body--special tool is needed (not expensive) available at Sears or auto parts
The simple answer to this question is a "Yes." It can be done with a few extra parts from the donor car. The ECU (Engine Control Unit) must be replaced with one from the donor car, and a wire must be run from the ECU to the VTEC solenoid on the new (replacement) motor.There are many resources on ...
It sounds like a CV axle shaft has come loose from the transaxle. This is usually caused by an improperly installed axle shaft of missing or damaged snap-ring type retainer.
I might start by checking the ground wire of the taillight assembly. Make sure there isn't any rust that is preventing a good electrical connection to the chassis ground.
Hello, I'm pretty sure that what you are talking about is the driver's door harness,(the fat hose looking thing that goes from the actual car to the driver's door). I replaced this part not so long ago since my power windows were not working and I had to kinda press on that thing for them to work...
Hi Your ECU needs re-setting. Detach the negative cable from the battery. Press break pedal for ten seconds. Leave car detached for two hours. Attach battery. Warning, you will probably lose your radio pre-sets, so make sure you have the re-activation codes. Start car, DO NOT TOUCH THE ACCELERATO...
Depends on the conditions. If it's not too hot and the car vents are set to outside air ... then you can stay indefinitely. Note all the RV's that people live in.On the other hand ... sitting in direct sunlight can raise the interior to oven-like temperatures in less than a half hour.
This could be caused by a shift solinoid. The transmissions these days are controlled by the computer. Not knowing exactly what the car is doing or exactly what tranny it has leaves me to guess. The other option is that the tranny is going out slowly. This could be caused by a shift solinoid. The...
Im from Nebraska and Yes you do you also need to make sure front and rear plates are up to date
Low tire pressure, using A/C, keeping windows open (wind drag), high profile vehicle (wind drag again), poorly serviced engine...there are probably more.Other than that weight plays a factor that many do not consider. Many people now take out spare tires in favor of a tire repair kit like "Slime"...
No. Righty-tighty, lefty-loosey.Just removed mine and looking for the specs on the thread as it looks like the last person in put it back in with a hammer-drill and broke some of the threads on the bolt: hence, I need to run a bottoming tap into the crankshaft to make sure these threads are still...
Could mean 2 things; Its programmed to do that, or theres a problem but it really doesnt matter because it still performs the same.
If your not familiar with automotive brake repair basics, at least purchase a shop repair manual for that vehicle and have a mechanic check your work.
To rebuild a 2004 Volvo it will cost between $1000 and $3000. It depends on who rebuilds it, the costs of the parts and where the parts are bought and any shipping costs.
It will probably be more work than it's worth. The computers aren't compatable.
1.5liter SOHC Inline 4, [email protected] / 98 lb-ft @ 5000rpms. Stock tires P175/65r14
you need a good manual (haynes is fine) for this job. i could try to explain it but even after seeing the photos and drawings in the manual i had to take it apart to understand.short version: remove instrument panel; remove kick panel above driver's legs; remove steering wheel; remove plastic tri...
Your radiator cooling fan is malfunctioning
this is a slightly vague question, but i will try to answer. check the front brakes. check the hubbearing. check cv axle, make sure axle nut is not loose.
your question makes no sence.any over sized wheels will over stress your drive train.
well, try and locate the heater hoses going into the car from the engine. they will go into the fire wall. With the engine warm , turn the heat on . See if either of the hoses get hot . If they dont you have a problem on the engine side. Probably a air bubble that nees to be bled from the cooling...
Replacing the timing belt on an Interference engine, and doing it wrong, can cause serious problems. Busted piston, bent valve, cracked head, are a few.
you cannot drive the car if the airbag is deployed, its pretty expensive to have them fixed
Hopefully it's just low on ATF if not you got problem$.
That is not normal. There are many things that could be causing that problem. The easiest and cheapest thing you could do is to replace the fuel filter. Usually they will run just a few bucks at the local auto store. If that doesn't do the trick, try to see if your car is smoking at all and try t...
Dangerous condition if you are mixing R-12 and R-134 not compatible with each other
This information can be found in your owner's manual, or under the hood on a placard. If you do not have one, then you need to get one. Dealer, E-Bay, Salvage Yard, and many online sites are sources for a manual. Use Google and search with the term, "Automobile Owner's Manual".
clean rad & cond at the car wash see if that wont help
try a coat hanger or a hammer to bust the window. IF a window is down enough, you can use a wire coathanger and hook and pull the lock up, which is difficult in late model cars. OR you can call a locksmith. Or you can get the vin number which is visible on most cars on the driver's side of the da...
Weak battery or starter motor shorted out internally.
Broken wires in left door or fuse
Yes. I got the SE rims from 96-97 4lugs and put it on the 98-00, and then switch 96 EX rims to 98-00.My friend bought the '01 rims and put it on his '96 Accord.The bolt patterns are the same so it works, bro.
bad ignition timing is correct. The timing gears may have slipped, and if the timing system uses a belt instead of a chain then the belt could have worn. The timing systen keeps the intake, exhaust and cyclinder pistons all in time so the engine will fire correctly. If the belt or chain slips eve...
The cam belt in a Fiesta LX 1.2 is not a part that needs to be changed at any certain time. It should be inspected every 100,000 miles and changed only if it shows signs of wear or breaks.
You can view the 1999 Mercury Cougar owners manual online at :www . motorcraft service . com ( no spaces )Click on Owner Guides
the map sensor is located on top the intake manifold and reads off map sensor just disconnect wire then get a Philips screw driver and take off then replace and put back on
Number 1 on the distributor cap is the top post closet to the firewall. Looking at the distributor cap it would be...top row 1-3bottom 2-4
A 2007 Honda Civic Coupe will hold approximately 3 quarts of transmission fluid. The transmission fluid can be purchased at any auto parts store.
The firing order is 1-8-4-3-6-5-7-2 Distributor rotates clockwise. Are you sure you have the valves adjusted correctly. Here is an excellent site that explains this procedure in detail. http://www.centuryperformance.com/valveadjustment.asp
Automatic transmission fluid level has to be maintaned for proper operation, check the level with the dipstick, it is marked to show low or full